Top Metal Reaming Tool

General Tools 130 T Handle Reamer, 1/8-1/2 Inch (3.175mm-12.7mm) Tapered/Fluted, Guitar Woodworker Luthier Tool

  • ENLARGES HOLES: perfect for when a drill could cause cracking in materials.
  • LUTHIER/GUITAR TOOL: enlarges bridge pin holes, headstocks, holes for tuners and volume/tone knobs.
  • INCREASED LEVERAGE: T-handle provides leverage for easier reaming with greater control and easier turning.
  • REMOVES BURRS: from wood, cut pipe, tubing and conduit. Inside deburring edge tool with capacity of 1/8" to 1/2".
  • ENLARGE & COUNTERSINK HOLES: In sheet metal, plastic and other materials with little effort.
  • DURABLE: made of hardened and tempered steel with precision ground cutting edges.
Check Stock

Pneumatic Drill Runs with Air Chuffs and Sputters

  • ECONOMICAL CHOICE: The IR 7807R Reversible Air Drill is a standard, economical pneumatic drill that’s best for service work requiring a compact, low....
  • APPLICATIONS: Use for drilling, reaming, or honing.
  • It's a durable, reliable tool for using on all types of materials, including sheet metal, wood and....
  • MAX POWER: Precision machine gearing ensures maximum power transfer and durability.
  • COMFORT + CONTROL: This air drill model is reversible with convenient control, has a comfortable lever throttle, and a durable Jacobs multi-craft....
  • GREASE PLUG: The drill features a grease plug for easy preventative maintenance.
Check Stock

Milwaukee 48-22-4106 6 in 1 Diagonal Pliers, 6-Inch

  • It also has easy to read wire gauge marking on both sides of the tool for stripping in either directions.
  • The handle is color coded, red meaning stranded wire.
  • Reaming Head Design-Smooth Edges of Metal Pipe From 1/2-Inch to 1-Inch (Patent Pending).
  • Bolt Cutter-Thread and cut #6 and #8 bolts to preferred length (Patent Pending).
  • High Leverage Design - For cutting power and performance.
  • Laser Hardened Cutting Edges - Cuts wire.
  • Offset Head Design - 15 Degree offset head for easier and quicker prying and pulling (Patent Pending).
Check Stock

GooM Inner-Outer Reamer,3/16-inch to 1-1/2-inch5mm-35mm) Pipe Reamer,Burr Remover for PVC Tubing,Tubing Chamfer Tool,PVC Pipe Deburring Tool,Red

  • Features 3-cutting edges,Ideal for reaming on copper,aluminum,brass and soft steel tubing.
  • Cutting edges on interior cone allow for fast clean inner reaming and outer deburring.
  • Sturdy plastic construction with stainless steel blades for extended tool life.
  • Pipe reamer has a 3/16-inch to 1-1/2-inch (5mm to 35mm) outside diameter capacity.
  • This Inner-outer reamers can be used for home use, plumbing applications or as a machinist tool in the shop.
Check Stock

Pipe Cutter, Tubing Cutter Tool 1/8\ to 1-1/8\ Outer Diameter, Copper Pipe Cutter, Mini Tube Cutter for Thin Metal and PVC Pipe, Pipe Cutter Tool for Copper, Aluminum, Thin Stainless Steel Pipe

  • High hardness blade: The blade of this pipe cutter is made of high-strength manganese steel, which can cut metal thin tubes, and it is equipped with a standby blade..
  • Wide Application：The copper pipe cutter can be used to cut copper pipe, aluminum pipe,galvanized pipe,corrugated tube,PVC and thin stainless steel tube..
  • Reasonable Design：The tubing cutter is attached with a bearing, fitted on the roller to make the rotation more smoother and clean..
  • Sturdy and durable:The metal cutter tool is made of stainless steel except for the rotating handle made of plastic to ensure its durability..
  • Including deburring tools:There is a deburring tool attached with the pipe cutter tool, made of sturdy steel. It can deliver quick, clean and easy inside diameter reaming of different tubes..
Check Stock

RIDGID 29993 227S Stainless Steel Pipe Reamer Tool, 1/2-inch to 2-inch Inner/Outer Reamer

  • Ideal for reaming on stainless steel and copper tubing.
  • 45 cutting edges on the interior cone allow for fast, clean inner reaming and outer deburring and beveling of tubes.
  • Hardened steel construction for maximum durability.
  • dual inch and metric measurement bar for ease of use.
  • Pipe reamer has a 1/2-inch to 2-inch (12 mm to 50 mm) outside diameter capacity.
  • RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.
Check Stock

uxcell 3mm Chucking Reamer, Tungsten Carbide Lathe Machine Reamer H7 4 Straight Flutes, 100mm Length Round Shank Milling Cutting Tool, for Stainless Steel Alloy Copper Metal

  • Specifications: Cutting dia.: 3.4mm / 0.13".
  • accuracy: D4. High-speed steel tool with cobalt is good for general purpose applications.
  • Uncoated Tool: Features just the base substrate without any additional treatment or coatings. Heat treated and quenched for stable performance, suitable for wide ranges of applications.
  • Round Shank: Can be used with a wide variety of tool holding systems. Good for use in through or blind holes and used for light cut, repair work, removing stock.
  • Features: Straight flute tool allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Reamer is with high hardness, toughness, wear resistance, long service life.
  • Application: Designed for accurate reaming in stainless steel, alloy steel and other metal materials, used on equipment including screw machines, turret lathes, drill presses and machining centers.
Check Stock

8 Pcs Swaging Tool Drill Bit Set HVAC Repairing Set Air Conditioner Manual Copper Pipe Swage Tube Tool with Copper Pipe Cutter and Deburring Tool for Copper Aluminum and Thin Stainless Steel Tube

  • ...eburring tool, complete set of tools, very suitable for air conditioning copper pipe flaring operation during HVAC installation, no complicated learning, easy to use..
  • 【Drill size】: 6 different sizes of drill bits, including 1/4'', 3/8'', 1/2'', 5/8'', 3/4'', 7/8''.
  • Handle diameter: 7 mm (hexagonal handle), pipe reaming tool is a necessary accessory for repairing air conditioners..
  • 【Mini copper pipe cutter】: 3-28mm (1/8" - 1 1/8") copper pipe cutter can cut copper pipe, steel pipe, stainless steel pipe, aluminum pipe PVC and iron. Note: Cutting PVC pipe is not recommended because it is much more difficult to cut..
  • 【Deburring Tool】: The blade is mounted on the handle can rotate 360 degrees, this tool helps to clean the top of the pipe or tube, it has a compact size and can easily be carried anywhere..
  • 【Why Do You Need HVAC Tools Drill Bit Set】: When connecting copper pipes of air conditioners, the soft copper pipes are expanded by the rotation of the drill bit, so that the two copper pipes are connected without leakage. When used in combination with electric drill and impact drill, it works more efficiently than the round head reaming tool. (The drilling speed should not be too fast.) The drill bit is made of durable and wear-resistan....
Check Stock

QWORK Chucking Reamer Set, 8 Pcs HHS H8 Straight Shank Machine Chucking Reamer Milling Cutter, 3/4/5/6/7/8/9/10mm

  • ⭐The reamer set are made of high speed steel, high hardness and good toughness, long service life..
  • ⭐With sharp cutting-edge, the chucking machine reamer set have high cutting ability, high accuracy and clean cutting..
  • ⭐This HSS H8 reamer set can process surface of iron, steel, plastic, wood, copper, aluminum and other metal materials..
  • ⭐The straight shank milling cutter tool set are widely used for bore machining, reaming to mould processing and handicraft processing, installed in drilling machine, milling machine, etc.
Check Stock

QWORK 1/8\ - 1/2\ Tapered Straight Flute Handle Reamer T Handle Tapered Reamer Tool for Wood Plastic

  • High Quality - Made of premium 45# Steel, it is durable, stable and high strength. And the cutting edges is sharp for expanding the hole..
  • Function - It is an ideal way for reaming the hole in metal sheets and plastic without effort, which is not easy to drill..
  • Design - With removable T-handle, it can save you the power to reaming and control..
  • Specification - This reamer can expand hole of size from 1/8" to 1/2"..
  • 100% Satisfied Service - Enjoy a smooth & frustration free experience with our 100% Satisfied Service in one Month!.
Check Stock

HNBun 1/32

  • HIGH QUALITY: Mt2 taper drill chuck made of durable high speed steel, corrosion and rust resistance.
  • drill press chuck compatible with impact drill and different power tool electric drill.
  • DIMENSION: Capacity 1/32" - 5/8", Mt2 Drill Chuck Overall Length: 93mm (3.7). Accuracy: 0.005", Chuck Mount : JT33.
  • PROFESSIONAL TOOL: High quality triple grip drill chuck accepts accessories with 1-16mm shanks, securely holds a wide range of twist drill bits, step drill bits, paddle bits.
  • MULTIFUNCTION: Drill chuck adapter suitable for centering, drilling, tapping, reaming operation. For portable, bench or floor type drill press.
  • WARM TIP: The mt2 drill chuck can NOT be used counterclockwise.
Check Stock

Steel Dragon Tools® 50767 Model 258 Power Pipe Cutter, Pipe Cutting Machine for 2-1/2-Inches to 8-Inch Schedule 10/40 Steel Pipe

  • ...ube cutter with 6pcs ball bearing rollers offers you a smooth cutting, improving cutting efficiency. Some small burrs are inevitable. So our steel pipe cutter comes with a deburring tool, which is made of sturdy plastic construction and high-speed steel blades. It can be used on both sides to perform inner diameter reaming and outer diameter grinding on the inner and outer sides of the incision to prevent scratches.
  • 【Ease Of Use】 - The bottom of the steel pipe cutter is equipped with a knob, which is comfortable to hold, can quickly adjust the tool, and provides a strong clamping force to ensure the stability of cutting. Just rotate the tubing cutter, cut the pipe flawlessly.
  • 【Wide Applications】 - The heavy duty aluminum pipe cutter is suitable for cutting hard materials such as copper pipe, aluminum pipe and thin stainless steel pipe, the cutting range is from 5 to 50mm, suitable for electrical, air conditioning installation, automotive and other plumbing installation and maintenance, plumbing tools.
Check Stock