Top Metal Seal Fitting

QuQuyi 3 Inch PVC Bulkhead Water Tank Connector Adapter Fitting with Plugs Thru-Bulk Pipe Fitting for Rain Barrels, Aquariums, Ponds(Set of 1)

  • Size & Material: 3 inch and qualified PVC,seal gaskets is 5mm thick.
  • please note locking nut is reversed threaded..
  • How to Install: the PVC Bulkhead Fitting is drill 4.17 inch hole to instal. Assemble the bulkhead and hose adapter together..
  • Durable: will not crack, fade, or peel.The bulkhead fitting with a thick silicone seal gasket will creates a better tight seal..
  • Package including: 1 pcs bulkhead adapters, 1 pcs plugs and 1 pcs seal gaskets..
  • Widely Application: suitable for industrial and house using.It can be installed in rain buckets, water tanks, water trough, ponds or aquariums, very fast and easy way to empty your rain barrel..
Check Stock

Crystal Bottle Twisting and Rolling

  • Metal and glass portable perfume bottle with CREATIVE DESIGNED STOPPER,looks expensive and luxury..
  • It’s not a spray bottle but can be applied for STORING and COLLECTING perfume, lotion,toner,essential oil,holy water,etc..
  • GOOD SEAL around neck when stopper is in place,perfume or other liquid DOES NOT EVAPORATE as with other poor fitting stoppers..
  • The empty glass bottles add ELEGANT DECOR for your bathroom,vanity table,dressing tables,mirror tray display,bookshelf,etc..
  • Lovely trinket crystal bottle,perfect for Travelling,glass art COLLECTION,keepsake and GIFT sending on Mother’s Day,Valentine’s Day,Christmas,Birthday or any other occasions..
Check Stock

Dixon FAB250N Aluminum Hose Fitting King Short Shank Suction Coupling with Brass Nut 2-1/2 NST Female x 2-1/2 Hose ID Barbed

  • Coupling for connecting a hose to a pipe or fitting.
  • Hose barb on one end and female NST threads on the other.
  • Aluminum shank for resistance to corrosion and chemicals and brass nut for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Barbed fitting for a tight seal on hoses and a rubber seal for high elasticity and resistance to abrasion and impact forces.
  • Nut for tightening threaded fitting with a wrench.
Check Stock

Ququyi 3/4 Inch PVC Bulkhead Water Tank Connector Adapter Fitting with Plugs Thru-Bulk Pipe Fitting for Rain Barrels Aquariums Ponds Set of 3

  • Size & Material: 3/4 inch and qualified PVC,seal gaskets is 5mm thick.
  • please note locking nut is reversed threaded..
  • How to Install: the PVC Bulkhead Fitting is drill 1-3/8 inch or 1-1/2 inch hole to instal. Assemble the bulkhead and hose adapter together..
  • Durable: will not crack, fade, or peel.The bulkhead fitting with a thick silicone seal gasket will creates a better tight seal..
  • Package including: 3 pcs bulkhead adapters, 3 pcs plugs and 3 pcs seal gaskets..
  • Widely Application: suitable for industrial and house using.It can be installed in rain buckets, water tanks, water trough, ponds or aquariums, very fast and easy way to empty your rain barrel..
Check Stock

Bulkhead Union Push to Connect Tube Fitting 3/8 In Tube OD Stainless Steel Double Threaded 5 Packs

  • Bulkhead Fitting Push Connector Type : 3/8 inch, Tube OD 3/8 inch NPT.
  • Bulkhead Fitting Type: Push In Straight Male Connector.
  • Body:Nickel Plated Brass Seal, O-Ring NBR.
  • Bulkhead Fitting Features: high pressure resistant and non tripping, all taper pipe threads are paint Teflon leakage-proof rubber, offering good seal property.
  • Push Fittings are easy to install, flexible and space-saving, 360-degree rotate freely, Release rings adopt ellipse design, which can be removed conveniently.
  • Fluid Admitted: Air, Vacuum, Water (No Freezing).
  • Negative Pressure-100Kpa | -29.5 In Hg. Working Temperature: 0-60¡ãC | 32¡«140¡ãF. Applicable Tube:PU / PA / PE / PVC.
Check Stock

4 Pack PVC Bulkhead for Rain Barrels 3/4" Male 1/2" Female, Winspeed Double Threaded Bulkhead Water Tank Connector with Thick Silicone Seal Water Tank PVC Connector Adapter for Pools, Aquariums, Tub

  • 【Durable 3/4" Male 1/2" Female Bulkhead Fitting】Our bulkhead fitting is made of high-quality PVC, equipped with 2 rubber rings for better sealing, which is colorfast, has no crack, and no peel as well as lasts longer than ordinary plastic fittings..
  • 【Efficient Water Tank Connector Fitting】The bulkhead fitting adapter is made of high-quality PVC, which is colorfast and durable. Bulkhead fitting comes with a silicone seal gasket for better sealing performance. Keep your bucket with fresh rainwater season after season and can also drain the bottom of the tank impurities..
  • 【What You Get】4 pcs 3/4" male 1/2" female bulkhead fitting and 8 pcs thick silicone seal gaskets. It can be very convenient for your daily life. You can share these good tools with your family and friends.（Please confirm the size before ordering！）.
  • 【Easy Installation】The compression bulkhead fittings are super easy to operate and quick to install, first drilling 25-26mm holes in the tank for installation, and assembling the bulkhead and hose adapter. It is suitable for household, commercial and industrial use..
Check Stock

Westbrass 593144-62 Black 1-1/2 Tubular Tip Toe Bath Waste Drain Kit Matte Black ,Pack of 1

  • 1-1/2 in. x 14 in. Black polypropylene tubes with slip joint washer seal for leak-free fitting.
  • ADA approved tip-toe bath tub drain plug. Press once to close and again to open.
  • Two-hole faceplate with two (2) 1/4 in.-20 x 1-1/2 in. plated brass color matching screws.
Check Stock

FIVKLEMNZ Car Roof Bag Cargo Carrier Door Hooks, Use to Secure Roof Bags Without Need for Roof Rack, 4 Door Hooks Only

  • [NO RACK NEEDED] ROOF MASTER Roof Door Tie Down Hooks can be used as anchor point to secure Rooftop Cargo Carriers without using Side Beams or Cross Beams. This can save you a fortune..
  • [EASY TO FIT] Open door, pull back rubber door seal and fit hook under the welded metal lip. It takes seconds..
  • [SECURE] The anchor point under the door seal on a vehicle is very strong and will take 10X the force required to hold the bag to your roof..
  • [STRONG] Straps are made from high tensile nylon webbing and are flag stitched for strength. This provides the perfect anchor point for the straps that secure your Rooftop Carrier..
  • [INCLUDED] Only 4 X Door Hooks fitting instructions and 12 month warranty. 7×24 online customer support, ask us anything at any time..
Check Stock

Camco 39319 Flexible 3-in-1 Sewer Hose Seal with RhinoExtreme Hose and Handle- Flexible Fitting Makes Connection to a Sewer Inlet Simple and Less Hands On!, Black, Standard

  • The Rhino Sewer Hose Adapter Flexible Drain includes a pre-assembled Rhino Extreme hose with sewer fitting, a 3-in-1 seal adapter and a pull handle. The seal fits in a 3, 3 and 1/2 or 4 inch inlet. No tools or setup required..
  • Adjusts to any angle for better drainage.
  • 3-in-1 seal adapter works with damaged threads.
  • Built-in swivel fitting with odor tight connection.
  • Includes flexible Rhino Extreme and a pull handle.
Check Stock

TEE CSST 1/2 X1/2 X1/2 by PRO-FLEX MfrPartNo PFTE-BBB6

  • 1-piece Retainer Ring that won’t fall off the fitting during installation..
  • Convenient, hand-tightening followed by ¼ to ½ turn with a wrench to seal the fitting..
  • Dual-size, inside-tapped fittings - ask any installer how handy this feature can be..
  • Annealed tube that allows the tubing to bend and stay bent..
  • Same dual-seal, gasket & O-ring fittings work with both traditional yellow and Flak Jacket products..
Check Stock

JoyTube 1” Female PVC Bulkhead Fitting with Plug Silicon Seal Gasket Water Tank Connector for 1-3/4 Inch or 2 Inch Hole Saw Rain Barrels, Aquariums (pack of 2)

  • Size:1 inches female. The PVC Bulkhead Fitting is perfect for 1-3/4 inch or 2 inch hole saw to install.Assemble the bulkhead and hose adapter together.
  • Made of durable PVC material which is no fade, crack and peel..
  • Threaded from the front to end, suitable for industrial and house using. It can be installed in water tank, storage barrel and rain barrels..
  • Package including: 2 pcs bulkhead adapters, 2 pcs plugs and 2 pcs thick silicone seal gaskets..
  • The bulkhead fitting with a thick silicone seal gasket will creates a better tight seal..
Check Stock

Beduan Brass Compression Fitting, Insert Tube Support Compression Sleeve Fitting 1/4\ Tube ID (Pack of 10)

  • ...ade of brass, these compression sleeves ferules are lightweight material but good toughness, high strength, features corrosion resistance and wear resistancee, strong pressure resistance, they are also very easy to assemble. Good sealing performance, no leaks..
  • ✅[FERRULE DESIGN] It is very practical for the tubing fitting. Like cylindrical shaped, bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅[HOW IT WORKS] Insert the tubing into the end of the fitting and then tighten it with the nut or screw and then forcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅[APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon tube or hard plastic tubing.....
Check Stock