Top Metal Tapping Machine

LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK

  • LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK.
  • Made of High Quality Tool Steel , this is a high quality product for your lathe machine * Used for threading and tapping purpose on the lathe machine.
  • Die Holder Sizes 13/16", 1" & 1-1/2" . * Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
  • Comes in precisely ground MT2 Shank, that goes inside your lathe tailstock & intended job for threading / tapping is hold in rotating chuck. * The Die....
  • The internal bore threading/ tapping is done by mounting the tap wrench head as per tap size between the above advised range is moved toward the....
Check Stock

100% 304 Stainless Snow Blower Impeller Modification Kit, 3/8inch 3-Blade Universal – Modifies 2-Stage Machine Including Installation Hardware, Repeated and Use Durable in Various Conditions (3)

  • Product includs:3-Rubber Paddle , 3-Metal Straps , 9-Bolts & Lock Nuts , 3-Self-tapping Screws.
  • The traditional zinc coated screw, after long time use, will inevitably rust with the nut and become welded together. This makes it impossible to repeat use after unscrewing. Our screws are made of 304 stainless steel, which means it can stand years of harsh environment while being rust-resistant. Because of this, you can expect to use it again and again..
  • Rubber Paddle 3/8″ thick(2″W x 5″L), Made from Styrene Butadiene rubber (SBR rubber) ,SBR rubber with minimum tensile strength of 725 PSI (5 MPA),Hard rubber with a durometer of 65-75.
  • Metal Strap with holes – 1 3/8″ W x 3 3/4″L ,Punched flat bar stainless steel materials, 1/16″ thick.
  • Bolts (5/16-18 x 1 in. coarse thread) w/ 5/16-18 lock nuts (use 1/2″ wrench & socket).
  • Hex Bolts,Hex lock nuts nylon inser,self-tapping screw (#14 x 1),Sheet metal screw, Hex washer head self drilling, Stainless Steel Materials.
  • The Purpose of the Kit : This kit reduces the existing “gap” between the snow blower’s impeller blades and the impeller chamber wall. The smaller the gap, the greater your machine’s operational efficiency and snow throwing capability will be, a....
Check Stock

400 PCS 410 Stainless Steel Self Tapping Screws for Metal,Length 1/2" to 2" Hex Head Self Drilling Screws, Rust Proof Wood Screws Assortment Kit #8#10#12 TEK Screws,White

  • PRACTICAL MULTIPLE SIZES：Self tapping screws for metal contain # 8 x 1/2 '', # 8 x 3/4 '', # 8 x 1 '', # 10 x 1/2 '', # 10 x 3/4 '', # 10 x 1 '', 12 x 3-4 '', # 12 x 1-1/2 '', # 12 x 2 '', totally 9 practical sizes. ALl sizes of Self tapping Screws are carefully selected to meet your different need. This screws assortment is consist of 400 pieces Tek Self Tapping Screw of different types, like #8, #10, #12 and three useful length..
  • DURABLE STORAGE BOX： All these self drilling screws are carfully kept and classified in one transparent, durable, solid and high quality tool box.This wood screws assortment kit is clearly attached the corresponding dimension table to facilitate the identification of metal screws with corresponding dimensions and put them back..
  • HIGH QUALITY WORKMANSHIP：This Wall plate screws adopt high-precision cutting technology, and the thread is very sharp, firm, clear, and would not be easily peeled off by the screwdriver. These Hex Head Self Drilling Screws profile provide a direct driving mode, which can easily penetrate wood and plastic without pre-dri....
Check Stock

CoCud Thread Milling Taps 1/4-32 UNEF Thread 2B High Speed Steel Machine 3 Straight Flutes Screw Threading Tool - Applications for Tapping Drilling Machine 1-Piece

  • ... Wide Application --- For threading through holes or shallow blind holes. 3 straight flutes design, rapid downward chip removal. Make new female threads or re-thread damaged female threads in stainless steel, ordinary steel, copper, aluminum, iron, alloy steel, plastic..
  • ★ Machine Taps --- Machine taps are used in tapping machines, vertical drilling and milling machines. M1-M3.5 micro taps process wood and soft metals with lower hardness, mainly used in clocks and watches. Drill holes with a twist drill before tapping..
  • ★ High Speed Steel --- The high speed steel tool has high hardness, high strength, good toughness, wear resistance, and heat resistance. Only the base substrate, without any additional coatings, good for a wide range of applications..
  • ★ Useful Tips --- Control speed based on material hardness. Add appropriate tapping oil for higher quality internal threads and more durable taps. The tapping depth should not exceed 1.5 times the diameter (eg: diameter=6mm (M6), maximum tapping depth=9mm). The tapping angle should be 90 degrees vertical and stable..
Check Stock

415PCS #6#8#10 Pan Head Self Drilling Tek Screws Kit 410 Stainless Steel Self Tapping Sheet Metal Screws Assortment

  • 【Dimensions】Diameter: #6 #8 #10 | Head: Pan Head | Drive Type: Phillips | Point Type: #2/#3 | Quantity: 415pcs | Material: 410 Stainless Steel..
  • 【410 Stainless Steel Self Tapping Screws】Not like other uses 304 Stainless Steel, VIGRUE self tapping screws are made of 410 Stainless Steel which features harder and higher tensile strength, more corrosion resistant, will last longer than other hardware on the market..
  • 【Pan Head Self Tapping Screws Assortment】VIGRUE self drilling tek screws features sharp tip and durable deep cut Philips drive head will get the job done easily, stripping heads is a thing of the past! Including most of common used sizes, is great to have around for fixing and joining thin metal, wood, furniture, plastic and other materials..
  • 【Warm Tips for Metal Screws】The sheet metal screw of #6 allows for Max. 2.5mm carbon steel sheet.
  • #8 screws for Max. 3mm carbon steel sheet.
  • #10 screws for Max. 4.5mm carbon steel sheet to avoid breaking off. Min Breaking Torque-2.8N.M..
  • 【Professional Aftersales Service】Fast shipping, 3-7 business days to arrive. 30 days no risk-return and 2-year assurance, if you have any questions, please feel free to contact the after sales services. VIGRUE is always your trusted hardware kit supplier.....
Check Stock

NORTOOLS Drill Tap HSS Combination Drill and Tap Set with 1/4 Inch Quick Change Adapter,6-32 to 1/4-20 Screw Tapping bit Tool

  • ...re wear-resistant and prolongs the service life..
  • ✅【Standard sizes】6Pcs Combination Drill and Tap Bit, Inculued 6-32NC (3.5mm), 8-32NC (4.2mm), 10-32NC (5mm), 10-24NC (5mm), 12-24NC (5.7mm), 1/4-20NC (6.35mm), to meet your diversified requirements..
  • ✅【Applicability】Drill tap bits set suitable for drilling tapping cutting on light metal aluminum board iron etc. Deburr/countersink also provided on bit beyond back taper. 4341 material is suitable for wood, aluminum, iron and other materials with lower hardness. The 6542 material has high hardness and is more durable, and can be applied to steel plates, even thinner 304 stainless steel plates of about 2mm..
  • ✅【High efficiency】 Complete hole drilling, tapping, durable and countersinking in one operation and greatly save processing steps and time costs, improve working efficiency. Recommended for use it on a tapping machine. Pay attention to the operation method when using the electric drill. Excessive shaking and tilting will affect the tapping and even break the tap..
  • ✅【QUALITY GUARANTEE】 We have carried out strict quality inspection and control on each drill tap bits set before leaving the factory, and the pass rate is above 99.99%. If you have any usage or quality problems, please fe....
Check Stock

US Stock ZAC Electric Tapping Machine with Auto Oiling and Blowing Function 110V Flexible Tapping Arm Machine Touch Screen M3-M16 Tapper ANSI Full Set Tap Holder Included

  • Model: M16R with Auto Oiling and Blowing, Universal Type, Supply Voltage: 110V, Rated Power: 600W, Rotated Speed: 0-375r/min Working Radius: 1045mm.
  • Main Feature: Oil spraying and air blowing volume adjustable.
  • When tapping, ZAC electric tapping machine can automatic oil filling, automatic air blowing, instead of manual oil brushing, greatly improving work efficiency.
  • Standard accessories: Tapping arm+servo motor and reducer+tap holder M3-M16(ANSI full set)+Universal Joint+Auto Oiling and Blowing Function. If you need DIN/JIS/ISO standard, pls contact with us.
  • Good at vertical and horizontal work of complex and heavy workpiece, locate quickly, and process accurately. Applicable materials: aluminum, copper, A3 steel, 45 steel, cast iron, pig iron, Q235, S136, mold steel, 718H, 40Cr, stainless steel and other metal materials, plastic and wood and other materials.
  • One Year Warranty. ETA: 7-9 Days to your Door via Express.
Check Stock

20 Piece Metric Tap and Die Set Manual Tooth Opener Alloy Steel Die Set with Green Storage Case Tapping Thread Cutting Kit for Garage

  • 10 Different Sizes: M1, M1.2, M1.4, M1.6, M1.7, M1.8, M2, M2.5, M3, M3.5 (coarse thread) for tapping various threads..
  • Standard metric thread design, clear and tidy, no burr, provide rapid chip removal for efficient threading..
  • With these machine hand taps, you will have a smooth tapping experience..
  • These micro taps mainly used for clocks and watches, and low hardness of wood and soft metal hole processing..
  • Made of HSS6542 high-speed steel which is durable, high wear, heat resistanceand for long life use..
Check Stock

MXBAOHENG M3-M12 Pneumatic Tapping Machine Air Drill Tapper for Universal Flexible Arm Portable for Using Chuck Size: M3,M4,M5,(M6),M8,M10,M12 (400rpm)

  • 【Tapping Range】M3-M12, Bracket can be installed,bracket need to be prepared by yourself, suitable for pipeline mechanical tapping..
  • 【Application】This pneumatic tapping machine is applicable to all machinery manufacturing industry, machine tools, tooling machinery, plastic machinery, printing machinery, packaging machinery, engineering machinery, automobile and motorcycle parts, aircraft engines and other general purpose machinery industries. Tapping for copper, iron, aluminum, steel, stainless steel, plastic and wood, and other material..
Check Stock

Truss Head Self Drilling Screw, Metal Stud Screws #8 x 3/4\ Phillips Wafer Modified Truss Head Fasteners, Durable Zinc Design for Drywall Sheet, Metal, Attaches Wire Lath to Metal Studs, Box of 25

  • 【Dimensions】Diameter: #8 | Head: Hex Washer,Wafer Head | Drive Type: External Hex(7mm),Phillips | Point Type: #2 | Quantity: 400pcs | Material: 410 Stainless Steel..
  • 【Metal Screws Self Tapping】These hex washer and wafer head self tapping screws are made of 410 Stainless Steel(harder than 18-8.
  • higher tensile strength than 304, 305, & others.
  • more corrosion resistant), deep cut Philips drive so stripping heads is a thing of the past!.
  • 【Stainless Steel Self Tapping Screw Experts】Not like others, VIGRUE self tapping screws assortment feature sharp tip and durable head will get the job done easily, including most of common used sizes, is great to have around for fixing and joining thin metal, wood, furniture, plastic and other materials..
  • 【Warm Tips for VIGRUE Screws】#8 for 3mm carbon steel sheet to avoid breaking off. Min Breaking Torque-2.8N.M. Size: #8x1/2'', #8x5/8'', #8x3/4'', #8x1'', #8x1-1/4'', #8x1-1/2''self drilling screws..
  • 【Professional Aftersales Service】Fast shipping, 3-7 business days to arrive. 30 days no risk-return and 2-year assurance, if you have any questions, please feel free to contact the after sales services. VIGRUE is always your trusted hardware kit supplier. More Self Tapping Screw(sheet metal screws) type ....
Check Stock

T.K.Excellent Sheet Metal Screw Oval and Pan Head 304 Stainless Steel #6 to #12 Assortment Kit,79 Pcs

  • Tapping screws are considered externally threaded fasteners that "tap" their own mating threads in metallic and non-metallic (such as plastic) materials..
  • The sharp threads draw material together and ensure a secure hold. Pan heads are raised above the surface. Oval heads provide a finished appearance..
  • Made of 304 Stainless Steel, corrosion resistant, durable and steady..
  • Self-Tapping Pan Head Screws are designed specifically to self-tap into plastic or metal,also make excellent fasteners for attaching metal hardware to wood because the fully threaded shank provides good retention in wood..
  • Package is see through case with dividers for each type of product: Self-Tapping Oval head Screws:6#*1/2 15pcs, 8#*1/2 10pcs, 10#*3/4 10pcs, 14#*1 6pcs Self-Tapping Pan Head Screws:6#*3/4 10pcs, 8#*3/4 10pcs, 10#*1 10pcs, 12#*1 8pcs.
Check Stock

1/4\ -20 x 3\ Hanger Bolts, 8 pack

  • A Hanger bolt is a headless fastener that has machine screw threads on one end and self-tapping threads on the other.
  • They are designed to hang items like sheet metal and wiring from wooden structures.
  • Product Dimension: 4.18" x 4.18" x 3.31".
Check Stock