Top Metalworking Tubing Cutters

Reed Tool H4S Hinged Steel Pipe Cutter, 4-Inch, Red

  • Designed for rapid cutting of 2-inch through 4-inch steel pipe.
  • Operates with minimal cutter rotation as necessary for tight quarters.
  • Clean cut with limited crimping or bending.
Check Stock

Tanstic 3Pcs Ratchet PVC Pipe Cutter Tool and PEX Straight Cut Pipe Cutter with Mini Tube Cutter, Ratchet-type Pipe Cutter One-hand Fast Pipe Cutting Tool PEX Tube Cutters for Pipe Cutting

  • ✔️[Package Includes] You'll get 1pc ratchet-type pipe cutter with max opening of 1-5/8 inch (42mm) and 1pc straight pipe cutter with max opening of 1-3/8 inch (35 mm), 1pc mini tubing cutter, total of 3pcs, which can meet your needs of daily use..
  • ✔️[High-quality Material] Our blades of pipe cutters are made of high-quality SK5 material with Teflon-coated on the surface, durable, sturdy, sharp, not easy to rust or break, high-hardness, good-toughness, which can be used for a long time and help to cut the pipe accurately and effectively..
  • ✔️[Ratchet PVC Pipe Cutter] The large pipe cutter in this kit adopts ratchet drive technology, which enable you to complete the cutting operation with one hand, labor-saving. Besides, this ratchet drive design can provide the function of automatic locking during the cutting process, which can protect users from injury caused by the rebounding blade. And the ergonomic handle is equipped with rubber, comfortable to grip, anti-slip..
  • ✔️[Straight Cut Pipe Cutter & Mini Tubing Cutter] The handle of the straight pipe cutter adopts the lever principle, labor, saving, light, handy. You just need to put the pipe into the knife edge, and then pull and tighten the handle to cut the pipe accurately and evenly. Besid....
Check Stock

Libraton Copper Cutter, Tubing Cutter with Deburring Tool Heavy Duty Mini Pipe Cutter for Copper Pipe, Aluminum Pipe, Thin Stainless Steel Pipe

  • [High-quality Blade] Libraton pipe cutter blade is made form aluminum alloy, wear-resistant. It will never get rust..
  • [Reasonable Design] The tubing cutter is attached with a bearing, fitted on the roller to make the rotation more smoother and clean. Strong corrugated knob for comfortable stable operation..
  • [Wide Application] The copper tube cutters' cutting range is up to 2" (50mm)(OUTER DIAMETER). The Mini Tubing Cutter is designed to cut Copper, Brass, Aluminum, Thin Steel and PVC Pipes with 1/8" to 1-1/8" ( 4-28mm ) Outer Diameter OD..
  • [Usable Attchament] There is a deburring tool attached with the pipe cutter tool, made of sturdy plastic construction and high-speed steel baldes. It can deliver quick, clean and easy inside diameter reaming of different tubes (e.g. copper, aluminum, PVC and stainless steel tubes).
  • [Easy To Operate]: Rotate the knob to grip tube, revolve copper tubing cutter around the tube, tighten grip smoothly after each full circle until full cut. Please let us know if you have any problem with this copper tube cutter. Our service team promise to reply to any of your messages within 24h..
Check Stock

Reed Tool H8S Hinged Pipe Cutter for Steel, 8-Inch

  • Designed for rapid cutting of 6-Inch through 8-Inch steel pipe, heavy-wall steel pipe and cast-iron pipe.
  • Operates with minimal cutter rotation as necessary for tight quarters.
  • Clean cut with limited crimping or bending.
Check Stock

Reed Tool TC4QPVC Quick Release Tubing Cutter for Plastic Pipe, 12-Inch

  • Best tracking, easiest cutting tubing cutters available.
  • Replace worn cutter wheels for longer tool life and faster cuts.
Check Stock

EZARC Pipe Cutter - Tubing Cutter Set with Mini Tube Cutter, Copper Pipe Cutter Tool 3/16\ to 2\ Outer Diameter for Cutting Aluminum PVC Thin Stainless Steel Tube

  • ...r diameter of 3/16 to 2 inches and a thickness of 1/10 inch. The mini tubing cutter is designed to cut through 1/8 to 7/8-inch pipes, with a maximum thickness of 1/10-inch. It is particularly useful in tight spaces where a full turn is not possible..
  • ✅【Exquisite Craftsmanship】This heavy-duty copper tubing cutters are made with heat-treated SKD-grade material cutting wheels and high-grade steel construction. This exquisite craftsmanship ensures they can effectively cut pipes made of aluminum, copper, PVC, as well as thin stainless steel tubes..
  • ✅【Clean & Precise Cut】EZARC professional copper pipe cutter set comes equipped with 6 individual bearings that allow for increased cutting speed. Precise rolling control ensures that each cut is smoother and more accurate, resulting in a cleaner and more precise cut during pipe cutting..
  • ✅【Various Cutting Materials】Our copper pipe cutter is versatile and can cut pipes with an outer diameter ranging from 1/8" to 2". It's perfect for cutting heavy-duty hard materials such as thin stainless steel, as well as all soft tubes like aluminum, copper, and PVC..
  • ✅【Cutting Efficiency】Our copper cutter features a solid ergonomic PVC knob located at the bottom, providing stability while in use and i....
Check Stock

LENOX Tools Tubing Cutters Set for Tight Spaces 3-Piece 14833TSK

  • Less Burr. More Cuts - Optimized blade geometry of shock-resistant steel.
  • Compact Design for Tight Spots - Non-slip grooved cast aluminum body only needs 1/2" clearance to cut.
  • No Rusting - Stainless steel rollers protect the cutter from corrosion.
  • Quick Identification - Color coding for easy tool recognition and cutting direction.
  • Kit Includes 1/2", 3/4" and 1" Tight Space Tubing Cutters.
Check Stock

Tubing Flaring Swage Tool Kit - Heavy Duty Steel Swage Tool Set for Copper Plastic Aluminum Thin Pipe With Tubing Cutter Tubing Bender & Ratchet Wrench

  • Note: The picture is for reference only, the actual product shall prevail. Material:Aluminum alloy steel cutter body, surface plating..
  • Tubing Cutter: suitable for cutting pipe diameter between (3-28mm)1/8-inch to 1-1/8 Inch for Pipe Copper PVC Thin Stainless Steel Tube..
  • 3 in 1 Pipe Bender: Three sizes of tubing 1/4", 5/16" and 3/8". Bending 0-180 degree copper , aluminum ,brass,and thin stainless steel pipes in the....
  • Double Flaring Tool Kit:This flaring tool kit is an tool for pipe flaring, and it can be used to make single or double flares on copper, brass and....
  • Easy to Use:The Screw of the pipe cutters provide easy control of cutting pressure for clean cuts.Flare groove rollers make rotation simple and....
Check Stock

Ridgid 31647 Quick-Acting Tubing Cutter

  • This item is used for Handtools & tool Organizers, pliers & cutters.
  • This product manufacture by United States.
  • Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool..
Check Stock

VEVOR Pipe Notcher Punch and Press Tool for 0-50 Degree Tube Notcher Tool Notches 3/4\-3\ Round Tubing Bore Hole Pipe Knotcher Aluminium Frame Tubing Notcher for Cutting Holes Through Metal, Wood.

  • Quick Cutting: The tube notcher features precise sharpening saw teeth. It can achieve smooth and fast cutting. With a superior high-speed steel cutting edge, the incision is neat. Hole saw not included..
  • Sturdy Construction: The tubing and pipe notcher is made of premium A3 low-carbon steel, make the notcher run for years without breaking down. Besides, It is light and portable..
  • Humanized Design: This tubing notcher can make round cuts in pipe and tubing of kinds of shapes at any angle from 0-50 degrees flexibly. The rotatable base is suitable for any horizontal surface, adaptable to any worktable..
  • Simple Operation: Ergonomic design and built-in protractor make it easy to use. The pipe notcher tool can work with a 1/2" drill for grooving 3/4" to 3" pipe, vise, or benchtop mount..
  • Wide Application: As a helpful tool for making great joints for clean, secure welds, it may work with any standard drill press. In addition, our pipe notcher is adaptable to a large variety of round cutters, hole saws, and milling bits..
Check Stock

2 Pcs Mini Steel Tube Cutter Tool, Mini Tubing Cutter Pipe Cutter Tube Cutter Tool of Diameter from 1/8 to 1-1/8 Inch (3-28 Mm), Tube Pipe Cutter for Copper Brass Aluminum, Thin Stainless Steel Tube

  • ...ni Tubing and Pipe Cutter: our tubing cutter is especially designed to assist plumbers, electricians and mechanics.
  • It is made of heavy duty alloy steel, this tube cutter mainly use for cutting copper, brass, aluminum and thin steel pipes.
  • Tube pipe cutter makes clean and precise cuts.
  • Various Tube Cuts: this tubing cutters will efficiently cut copper, brass, aluminum, thin steel and PVC pipes with 1/8 to 1-1/8 inch (3-28 mm) outer diameter.
  • This mini tube cutter provides a fast way to do a clean cut.
  • Convenient and Powerful: our small pipe cutter fits nicely in restricted spaces.
  • The mini steel tube cutter tool features a strong yet lightweight slide and wheel housing and large knurled screw knob for easy control of cutting pressure.
  • Large knurled feed screw knob provides users with ultimate cutting pressure control to produce clean cuts.
  • Multifunctional Pipe Cutter: this tube cutter tool fits for use on construction sites, plumbing jobs, HVAC and refrigeration, heating, manufacturing, decorating or even at garage repair shops and so on.
  • Specifically designed for use in restricted spaces to make tight cutting jobs significantly easier and more manageable.
  • Easy to Operate: cutting thin stainless steel tubing has never been easier.
Check Stock

Biltek Plasma Cutter 50A Dual Voltage 110V/220V Cutting Torch Kit, 1/2 Inch, IGBT Technology, Portable Plasma Cutter Machine, Metal Cutter for Steel, Copper, Aluminum, Brass, Other Metals + 250V Plug

  • ...lectrically Conductive Metal Like: Mild Steel, Stainless Steel, Carbon Steel, Expanded Steel, Aluminum, Copper, Brass and Other Ferrous (Iron-Containing) And Non-Ferrous Materials. A Must-Have Home Improvement Machine! Not Only Can You Cut Metal, You Can Also Bevel, Gouge, Mark, And Even Weld! No Other Tool In Your Metalworking Arsenal Is So Flexible..
  • [AUTOMATIC DUAL VOLTAGE- 110/220V [50/60 Hz] The Plasma Cutting Equipment Comes With A Pre-Attached 110V Plug That Can Be Switched With a 220V Plug (Included) for Even More Cutting Power! Connect the Plug to the Power Source and the Machine Automatically Switches To the Correct Input Power! No External Conversion Plug Required. Additionally, Our Metal Cutting Machine Is Equipped With A Powerful And Advanced 50AMP DC Inverter.
  • Making It Capable Of Reaching Even Higher Cut Specs..
  • [SAFE FOR AT-HOME USE & EASE OF USE ] One of The Most Important Features Of Our Metal Cutting Torch is That it Uses Non-Hazardous Compressed Air To Cut Metal Which Is Far Safer Than The Acetylene, Propylene, And Other Flammable And Volatile Gases Used In Oxy-Fuel Cutting Processes. Are You Unsure Of What To Do With The Machine? Don't ....
Check Stock