Top Methanol Flow Meter

RAINPOINT Water Meter Water Flow Meter for Garden RV Hose Measure Gallon or Liter Water Consumption Fits 3/4-inch Outdoor Hoses and Faucets

  • HELPS CONSERVE WATER >>This portable water meter measures water consumption and water flow rate. With large LCD display allows you quickly know about....
  • SENSITIVE & ACCURATE >> This water flow meter is equipped with a built-in hall sensor, Accuracy up to 1/10th Gallon, Measurement Tolerance > RAINPOINT hose water meter monitors not only the current singular watering volume and accumulative total water consumption, but....
  • SIMPLE & FAST CONNECTION >> The hose flow meter comes with 2 quick connectors and can be easily connected to any standard 3/4’’ garden hose,....
  • EASY TO USE >> The LCD screen of this water hose meter is big enough to be easy to read and displays water usage in gallons or liters. One button....
Check Stock

Stage 2 Boost Cooler™ Forced Induction Progressive Water-Methanol Injection Kit (Stainless Steel Braided Line, 4AN Fittings)

  • Adjustable Boost Activated Progressive Water-Meth Delivery.
  • Low Level Monitoring & High Flow Check Valve.
  • Includes: 300 PSI UHO Pump, 3Qt Tank, Adjustable Progressive VC-50 Controller/Harness, (1) 1', (1) 2', (1) 5' Stainless Steel Braided Line, Boost Line/Required Hardware, Required 4AN Fittings, SP Decal, Self Sealing Level Sensor, Snow Performance Hypersonic-Water-Meth Nozzles/High Flow Check Valve.
Check Stock

Quick Fuel Mechanical Fuel Pump For Sbc

  • Shut-off pressure pre-set from 6.5 to 8 PSI.
  • Inlet and outlet tapped for 1/4 pipe thread.
  • Rugged construction provides continuous high RPM operation.
  • Not for use with fuel injection systems or alcohol and methanol fuels.
Check Stock

AEM 30-3003 Water/Methanol Injection Filter

  • Simple to install, takes less than a minute.
  • Polypropylene housing-rugged material that is compatible with high concentrations of methanol.
  • Completely serviceable assembly, can be disassembled, cleaned and reused for a long service life.
  • Stainless Steel mesh strainer-AEMs custom mesh strainer filters down to 40 microns, much smaller than similar filters.
  • Large Filtering Area assure long service life and does not significantly reduce flow.
Check Stock

DAE AS200U-75 Water Meter, 3/4\ NPT Couplings, Measuring in Gallons

  • Horizontal Inline mount with dial facing upward. For the water meter to be installed vertically with water flowing upward, please refer toDAE V-75. Or DAE PVM-75, DAE VM-75P which can be installed in any position, vertically or horizontally, water flowing downwards or upwards, dial facing upwards, downwards or side-way..
  • For upgraded AS200U-75P, Cloud Metering available (2nd picture) with DAE CC2030 Gateway. CC2030 will collect water usage from DAE AMR (for 16 meters) or AMR130AN (for 1 meter) and send them to cloud server through Ethernet. With PC, cell phone, the landlords can see real time data, monthly water usage & billing reports to their tenants. If there is abnormal usage (ex. Broken piping), an email alert will be sent to your cell phone..
  • For upgraded AS200U-75P, ready for use with CO-10 (Electronic Pulse Counter) or CO-10 KIT - An inexpensive remote reading solution (6th picture). Can also use with DAE AMR130 (Auto Meter Reading Module for single water meter) and AMR (for 16 water meters) for remote reading (5th picture)..
  • For product description, you can also refer to “Specification Sheet” in “Product guides and documents”. To install the DAE 3/4" water meter with the 3/4" garden hose at both ends (or one end with hose bibb and the o....
Check Stock

NEW HOLLEY 97 GPH RED ELECTRIC FUEL PUMP WITH BRACKET,STREET & STRIP CARBURETED APPLICATION,COMPATIBLE WITH GASOLINE ONLY

  • Brand New Holley 97 GPH Red Electric Fuel Pump (Part #12-801-1).
  • Features: Tumble polished billet look | Lower housing casting designed for enhanced fuel flow | Maximum pressure is 7 PSI | Motor draws 2 amps current | Relay kit P/N 12-753 & 7 1/2 amp fuse recommended | Constant fuel flow with no pulsation | Improved design for street/strip applications | Not designed to be used on aircraft of any type | Distinctive Red logo | Flows 97 GPH (free flow) | Flows 71 GPH at 4 PSI | Regulator is not required.
  • Has externally accessible pressure relief valve (max 7 PSI) | Rotor/vane pump design is more tolerant of contaminated fuels | Weighs only 2.88 lbs | Not designed or recommended for use with fuel injection systems | Includes mounting bracket | Repair kits are readily available | Can be serviced from the pump end | Not compatible with alcohol or methanol fuels | Use of safety shut-off switch, P/N 12-810, strongly recommended.
  • Specs: Application: Universal | Bracket Color: Silver | Brand: Holley | Emission Code: 5 | Free Flow GPH: 97 | Free Flow LPH: 367 | Fuel System: Carbureted | Fuel Type: Gasoline | Inlet Size: 3/8″ NPT | Material: Aluminum | Motor Finish: Silver | Outlet Size: 3/8″ NPT | Product Type: Fuel Pump | Pump Body Color: Silver.
Check Stock

DAE MJ-100 1\ NSF61 Lead Free Potable Water Meter, Pulse Output + Couplings, Gallons

  • Horizontal mount with dial facing upward. For the water meter to be installed vertically with water flowing upward, please refer to DAE PD-100 (B08D7356MY), which can be able to be installed in any position, vertically or horizontally, dial facing upwards or downwards or horizontally, water flowing downwards or upwards..
  • Certified by NSF to meet ANSI/NSF 61 for material safety and ANSI/NSF 372 for lead free plumbing as defined by the US Safe Drinking Water Act. Factory Calibration Certificates available. DAE Controls LLC is a Minority Business. Please feel free to get the NMSDC Minority Supplier Certificate from DAE Controls Website..
  • Cloud Metering available (2nd picture) with DAE CC2030 Gateway. CC2030 will collect water usage from DAE AMR (for 16 meters) or AMR130AN (for 1 meter) and send them to cloud server through Ethernet. With PC, cell phone, the landlords can see real time data, monthly water usage & billing reports to their tenants. If there is abnormal usage (ex. Broken piping), an email alert will be sent to your cell phone. No IT guy required. Just connect wires as per a simple picture (see video) & ready to go..
  • Ready for use with CO-10 (Electronic Pulse Counter) or CO-10 KIT - An inexpensive remote reading solution (6th picture). Can also....
Check Stock

Dura Products DPABS-4315E Dura-ABS – 110V Auto Batch System w/Dura-Meter w/Lexan Faceplate, Dura-Pump w/EDPM Rubber

  • AUTO BATCH SYSTEM: This is an intuitive interface that allows for the selection of manual or automatic operation with the flip of a switch. This is a high-flow pumping system with up to 15GPM flow rate..
  • HOW IT WORKS: The Auto-Batch System is easy to use. All you need to do is select the volume desired, press START. The pump will begin to dispense fluid and automatically shuts off when complete..
  • KIT INCLUDES: The Dura-ABS kit includes high-flow Dura-Pump and Dura-Meter with Lexan faceplate. It is available in preset, quick list or manual calibration..
  • DURA METER: The fluid flow meter has 100% moisture sealed circuitry that makes meter impervious to water intrusion. It is also equipped with menu driven backlit display to check the fuel level. It can be plumbed both for in-line and 90o applications..
  • DURA PUMP: The hydraulic pump has a 30-minute duty cycle and automatically shuts off after 10 minutes. The included ¼ HP motor is thermally protected from overheating which makes it suitable for elaborated use..
Check Stock

Dura Products DPABS-4312E Dura-ABS – 12V Auto Batch System w/Dura-Meter w/Lexan Faceplate, Dura-Pump w/EPDM Rubber

  • AUTO BATCH SYSTEM: This is an intuitive interface that allows for the selection of manual or automatic operation with the flip of a switch. This is a high-flow pumping system with up to 15GPM flow rate..
  • HOW IT WORKS: The Auto-Batch System is easy to use. All you need to do is select the volume desired, press START. The pump will begin to dispense fluid and automatically shuts off when complete..
  • KIT INCLUDES: The Dura-ABS kit includes high-flow Dura-Pump and Dura-Meter with Lexan faceplate. It is available in preset, quick list or manual calibration..
  • DURA METER: The fluid flow meter has 100% moisture sealed circuitry that makes meter impervious to water intrusion. It is also equipped with menu driven backlit display to check the fuel level. It can be plumbed both for in-line and 90o applications..
  • DURA PUMP: The hydraulic pump has a 30-minute duty cycle and automatically shuts off after 10 minutes. The included ¼ HP motor is thermally protected from overheating which makes it suitable for elaborated use..
Check Stock

FST Performance RPM350 FloMax 350 Clear Anodized -6/-8 AN Port Fuel Filter/Water Separator System

  • High fuel flow capabilities and extremely low fuel flow restriction coupled with highly efficient 4 micron filtration.
  • Designed for use in gasoline, racing fuel, ethanol, and methanol in a wide variety of motor sports applications and engineered for either suction or pressure side mounting.
  • Multiport design allows unused fuel ports to function as a fuel system drain, regulator mount, fuel pressure gauge port, flows 300 gallons per hour with a filtration efficiency of 4 microns and burst pressure for this unit is 250 PSI.
  • Filter measurements are 4.25 inch height, 3 inch width and 3.75 inch depth.
  • unit weight is only 19 ounces and features 1/2 inch NPT (pipe threads) ports.
  • made of solid billet aluminum to eliminate porosity, leaking or air intrusion.
Check Stock

Argon/CO2 Flow Meter Gas Regulator Compatible with Mig Tig Welder Regulator with 6.6FT Gas Hose 10 to 60 CFH Output Flow 0 to 4000 PSI - CGA-580 Inlet argon flow gauge welding regulator

  • ...rdy and durable, which can withstand harsh environments and have a longer life. Came with 6.6 Ft argon welding gas regulator hose and protective cover are made of impact-resistant composite material for safety and durability.
  • 【Wide Application】Idea choice for CGA 580 Tank Fitting. This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet). So it will screw right into the Argon, Argon/CO2 tanks. IDEAL FOR Miller, Lincoln, Hobart, HTP, and most other welders! Idea choice for MIG TIG welding, cutting ,chemical and electronics industry.
  • 【Accurate Gas Flow Gague】Adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube. 0-4000psi inlet pressure, easy-to-read bottle pressure gauge included, allowing you to view how much gas is left in the tank range 0 to 4000psi. Will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. It also comes with a standard 1/4" barbed fitting.
  • 【Good Design】Use economic style flow meter regulator and single stage piston design, combination of regulator and flow meter as one unit, compact lightweight construction, convenient for use. Argon Regulator is a ideal choice for professional TIG/MIG welding applic....
Check Stock

Aeromotive 11186 In-Line Brushless 5.0 Gear External Fuel Pump with Mounting Feet, 1 Pack

  • Integral, external brushless controller for clean installation, cooler fuel and enhanced reliability.
  • Supports naturally aspirated engines up to 3400 HP with EFI, up to 3600 HP carbureted and forced induction up to 2600 HP with EFI and up to 2700 HP carbureted.
  • Capable of 90-psi continuous operating pressure, 150 psi peak, base plus boost.
  • EFI rated flow of 1, 700 lbs./hour at 40 psi, 13.5 Volts.
  • carb rated flow of 1, 850 lbs./hour at 9 psi, 13.5 Volts.
  • Reduced current draw at higher, EFI pressures.
  • lighter than the traditional external mount pumps.
  • extended service life in methanol and ethanol.
  • Pressure regulator not included (sold separately) - for EFI applications use regulator P/N 13134 or P/N 13110, for carbureted applications use regulator P/N 13202 or P/N 13212.
Check Stock