Top Metric Countersink

amoolo Countersink Drill Bits Set 7Pcs, Counter Sink Drill Bit for Wood, Woodworking High Carbon Steel Carpentry Bit with Chamfering Combination Pedestal, 1 Free Hex Key Wrench Attached

  • 【IDEAL COMBO SET】 A set of 7 countersink drill bits with 7 drill size, φ7/64”(3mm), 5/32”(4mm), 13/64”(5mm), 1/4”(6mm), 9/32”(7mm), 5/16”(8mm) combine with 19/32”(15mm) countersink pedestal, 13/32"(10mm) combine with φ45/64"(18mm) countersink pedestal. A 1/10"(2.5mm) free hex key wrench. Come with a portable plastic case for easy select, storage and organization..
  • 【PREMIUM QUALITY】Made with industrial grade high-carbon steel, great hardness provides sharp edges, high strength takes bits with superior cutting capactiy and durability. Ideal for household woodworking and DIY Projects..
  • 【EFFICIENT DESIGN】3-point tricuspid ensures drill process accurate and fast, no offset, slip and bias during drilling.
  • 2-spiral flute makes chip removing easy and efficient.
  • 5-edged chatter-free chamfer cutter pedestal design makes countersink precise and smooth. All cutting edge are well hardened and honed for sharpness..
  • 【MULTIPLE APPLICATION】 Perfect for Wooden planks, Fiberboard, Particle board, Plywood, Plastic, PVC and soft metals. Suitable for hand drill, bench drill and electric drill. The drilling depth of countersink drill bits are adjustable by screws with various lengths.
  • Meanwhile, their bits are removable for easy cleaning, sharp....
Check Stock

FTG USA Replacement Tapered Countersink Drill Bit Set 3 Pc #6 9/64 Countersink Bit Same Size Bit Replacement Only Countersink Replacement Drill Bit for Wood Counter Sinker Drill Bit Set

  • Replacement tapered counter sinker drill bit set 3 Piece #6 (9/64") bit replacement Only (without the 4 Flute cutter countersink counter-bore), made....
  • FTG drill bit replacement set made with tapered countersink bits for wood. Countersink replacement bits set with tapered drill bits. Top Quality 9/64....
  • THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 countersink drill bit for wood with tapered drill bits. Replacement countersink drill bits....
  • Countersink replacement bits made for countersink drill bits for wood. with wider flute for increased chip flow. Replacement drill bits have logo....
  • STORAGE CONTAINERS for this set available below on this page at section " Make it a bundle". Replacement counter sinker drill bit designed in New....
Check Stock

DEWALT Drill Bit, #10 Countersink, 3/16-Inch (DW2539)

  • Drill, countersink and counterbore in one step with this drill bit.
  • Four-cutter countersink and tapered drill bits for wood, metal and plastic provide superior speed and ideal finish.
  • Replacement tapered bits offered for DEWALT drill bits.
  • Drill, countersink and counterbore in one step.
  • Four-cutter countersink and tapered drill bit provide superior speed and ideal finish.
Check Stock

FTG USA Countersink Drill Bit Set 6 Pc #6 (9/64\) Wood Countersink Drill Bit Pro Pack Countersink Set, Tapered Countersink Bit, 1 Stop Collar, Hex Wrench, Woodworking Countersink Drill Bits

  • Countersink drill bit set for wood with tapered drill bit, 4 Flute countersink cutter #45 Carbon Steel, tapered countersink set features 6 Piece Pro drill set Same Size drill bits with countersink #6 (9/64") Adjustable wood countersink, 1 Depth Stop Collar 3/8.
Check Stock

FTG USA Wood Countersink Drill Bit Set 5 Pc Countersink Drill Bit #4 6 8 10 12 Tapered Drill Bits with Improved Connection Drill Bit with 1/4 Hex Shank and Allen Wrench,

  • Countersink drill bit set for wood with tapered drill bit 3rd Party Tested HSS M2, 4 Flute countersink cutter #45 Carbon Steel tapered countersink set....
  • Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable....
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with....
  • THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 countersink drill bit for wood with tapered drill bits. Wood countersink bit with wider....
  • Counter sinker drill bit set designed in New Jersey by Fair Trade Group USA and Professionally manufactured in China at FTG USA specs. Analysis Report....
Check Stock

Replacement Bits For No 8 Trim Smart-Bit Pre-Drilling And Countersinking Tool Item No BDA141

  • [Specifications and packaging]: Countersink drill bit set includes 5 pcs countersink bits and 1 pc aluminum carrying case.Include size:1/4", 3/8",....
  • [Function]: Counter sink drill bits sink holes into most machinable metals, plywood, softwood, hardwood, fiberglass plastic, mild steel..
  • [Material]: Metal countersink bits are made from industrial grade high-speed steel for increased durability.Each sink has a black oxide coating to....
  • [Advantage]: 82 degree countersink a five-flute design removes chips faster and dills smoother and ensures an extended life..
  • [Special 82-Degree Tip Drills]: Steel countersink bits 82-degree tip drills can drill holes on almost any material, with unique design, high....
Check Stock

AUTOTOOLHOME Titanium Combination Drill Tap Bit Set 13PCS SAE and Metric Tap Bits Kit for Screw Thread Drilling Tapping Deburring Countersinking

  • ... include SAE and metric sizes, Suitable for most commonly used screw tapping.SAE Included 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC and 1/4-20NC,Metric included M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5 , Includes storage case and quick change adapter for easy bit switching.
  • Drill, tap, deburr and countersink in one quick and easy action,and complete job on copper, brass, aluminum, sheet metal ,mild steel and plastic.work completely, greatly save processing steps and time costs, and improve work efficiency..
  • Each drill tap bit is engraved with the right size, which is convenient for you to choose the size that suits you. Strong hex shank ensures strong connection to drill.a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • Included convenient swivel storage case,Swivel feature props up tap drill bits and securely holds them in place until ready to use. The storage case folds up neatly and is convenient to travel with on different job sites and locations..
Check Stock

29-Pack Woodworking Chamfer Drilling Tools WENHUALI 6 Countersink Drill Bits 7 Counter Sinker Drill Bit 8 Wood Plug Cutter 3 Step Drill Bits and 3 Countersink Drill Bit with 1pcs Center Punch.

  • .... Specification: 3/16''-1/2'', 1/4''-3/4'', 1/8''-1/2''. Suitable for drilling holes within 0.12 inch (Iron Plate, Copper Plate, Aluminum Plate).
  • within 0.2 inch (Wood, PVC sheet, Insulation Boards). Not recommend for hard and brittle materials such as stainless steel, glass, tile floors, walls etc..
  • 7Pcs 3- Pointed Countersink Bit for Wood – Made of high carbon steel with high hardness & abrasion resistance, large chip flute and five edge chamfers can drain sawdust faster and easier(Size include: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm). With 1pc hex L-wrench, you could easily remove and adjust counter sleeve depth and drilling depth..
  • 8Pcs 3/8" Shank Wood Plug Cutter Drill Bit Set – Made of durable carbon steel, it is used for tapered 1/4", 3/8", 1/2", 5/8" corks to cover recessed screw holes or hide imperfections.Could cut the plug 22mm/23mm/25mm/26mm in depth as well..
  • 6Pcs 1/4" Hex Shank 5 Flute Countersink Drill Bit – Made of high speed steels, they're pectect for sinking 90° holes into Wood and PVC boards for ountersunk screws and fixings. 6 different diameter: 6mm(1/4"), 8mm(5/16"), 9mm(3/8"), 12mm(1/2"), 16mm(5/8"), 19mm(3/4")..
Check Stock

DAYREE 5PCS Countersink Drill Bit Set Wood Drill Bit Set Woodworking Tools #5, 6, 8, 10, 12

  • High-quality materials: High-speed steel counter sink drill is made of high-speed steel material, high hardness, durable, not easy to rust, good corrosion resistance. And provide excellent cutting capabilities.
  • Removable and adjustable: The L-shaped hex wrench provided by Flute countersink drill bit can easily adjust or remove the drill bit and the five-slot chamfer. For your convenience.
  • Multi-purpose: Hex countersink drill bits is suitable for granite, ceramic tile, glass, quartetization, ceramics, ceramic tiles, etc. Suitable for bench drill, hand drill and conventional electric drill.
  • Three-point design: Twist drill countersink bit set to drill a smooth hole quickly and accurately. The five-edge chamfer design will automatically remove chips from the holes on both sides.
  • Package Content: Counter sink bit for wood is a set of countersink bits, equipped with a hex wrench and 5 countersink bits. There are 5 sizes, including #5#6#8#10#12mm, which can meet all your needs..
Check Stock

wesleydrill Countersink Drill Bit Set 5 pcs 82 Degree Counter Sink Fit for Sink Holes into Most Machinable Metals Plywood Softwood Hardwood Fiberglass Plastic Mild Steel

  • [Specifications and packaging]: Countersink drill bit set includes 5 pcs countersink bits and 1 pc aluminum carrying case.Include size:1/4", 3/8", 1/2", 5/8", and 3/4"..
  • [Function]: Counter sink drill bits sink holes into most machinable metals, plywood, softwood, hardwood, fiberglass plastic, mild steel..
  • [Material]: Metal countersink bits are made from industrial grade high-speed steel for increased durability.Each sink has a black oxide coating to resist corrosion..
  • [Advantage]: 82 degree countersink a five-flute design removes chips faster and dills smoother and ensures an extended life..
  • [Special 82-Degree Tip Drills]: Steel countersink bits 82-degree tip drills can drill holes on almost any material, with unique design, high efficiency, convenience and speed..
Check Stock

DKIBBITH Pcs M2 Countersink Drill Bit Set, 3in1 Wood Pilot Countersink Drill Bits Drilling #4#6#8#10#12 Screws Holes, with Adjustable Depth Stop, Quick Release Hex Shank, 2-Allen Wrench

  • Easier & Faster – 3 in1 Drill Countersink and Counterbore in one step, with this 7 Pcs M2 Countersink Set you can get perfect counterbored holes for #4 #6 #8 #10 #10 #12 #12 screws without changing bits.
  • Meet All the Needs – with popular 82 Degrees Countersink and 3/8” Counterbore Bits - You can either have the head of the screw below the surface then conceal it with matching wood plugs, or fit flush with the surface.
  • Cutting Depth Adjustable – You may need holes for long or short screws.
  • these counterbore Drill Bits with Adjustable Depth Stop to fit the length of your screws.
  • just tighten the pilot drill bit with the hex key (included) to the Countersink / Counterbore sleeve.
  • Fit Most Tools – 1/4" hex shank design compatible with most quick-change chuck machines or power drills.
  • Includes 7 pieces of Drill/Countersink/Counterbore 3in1 bits in sizes 5/64”, 3/32”, 7/64”, 1/8”, 1/8”, 9/64” 9/64”。.
  • For Hardwood & Softwood - The HSS M2 Grade countersink drill bit perform well in softwood or hardwood and serve the needs of most woodworkers.
Check Stock

MUXSAM 1/4 inch Hex Shank Countersink Drill Bit Power Tools Accessories for Plastic Metal Woodworking Tool by Power Drill 5Pcs/Set #5#6#8#10#12 (Gold)

  • ♡【SATISFY YOU ALL DEMAND】Countersink drill bit set is include 5 pcs of drill bits in 5 different sizes to satisfy you all demand. The most often used sizes for carpenters, cabinet, furniture makers and other wood working trades..
  • ♡【USER-FRIENDLY DESIGN】Standard 1/4 inch hex shank is quick change compatible and has an adjustable counter sleeve depth with Allen wrench..
  • ♡【MULTIPURPOSE】Countersink drill bit erfect for wooden planks, plastic, soft metals, fiber board, particle board, plywood, alumiumn board etc..
  • ♡【HIGH QUALITY】Countersink drill bit is made by high speed steel, this countersink drill bit is easy to use. Meanwhile compared with ordinary the drill accuracy more high..
  • ♡【GOOD WORKING】The countersink drill bit have self-starting point and five-fluted design eliminates chatter and vibration for smooth operation to make clean, accurate and burr-free cuts..
Check Stock