Top Metric Irregular Taps

uxcell 5 Pairs Metric Hand Threading Tap Set M2 Thread 0.4mm Pitch Taper & Plug Milling Taps Straight Flutes High Speed Steel

  • Metric Taps: M2 x 0.4 metric taps set. Taper style: starts the thread square with the workpiece. Plug style: generally used in through holes..
  • Applications: The hand threading tap kit is used to re-thread damaged or jammed threads. Suitable for threading mild steels, aluminum, iron, copper, hard plastic..
  • Easy to Use: Hand tapping, mainly used with tap wrenches. Standard thread milling taps are used to thread through holes or shallow and blind holes..
  • Features: Straight flute design, downward chip removal. High speed steel tool is high hardness, high strength, good toughness, and wear resistance..
  • Tips: Add appropriate tapping oil for higher quality internal threads and more durable taps. Without any additional coatings, good for general purpose applications..
Check Stock

uxcell 5 Pairs Metric Hand Threading Tap Set M1.4 Thread 0.3mm Pitch Taper & Plug Milling Taps Straight Flutes High Speed Steel

  • Metric Taps: M1.4 x 0.3 metric taps set. Taper style: starts the thread square with the workpiece. Plug style: generally used in through holes..
  • Applications: The hand threading tap kit is used to re-thread damaged or jammed threads. Suitable for threading mild steels, aluminum, iron, copper, hard plastic..
  • Easy to Use: Hand tapping, mainly used with tap wrenches. Standard thread milling taps are used to thread through holes or shallow and blind holes..
  • Features: Straight flute design, downward chip removal. High speed steel tool is high hardness, high strength, good toughness, and wear resistance..
  • Tips: Add appropriate tapping oil for higher quality internal threads and more durable taps. Without any additional coatings, good for general purpose applications..
Check Stock

6mm x 0.75 Metric Taper and Plug Tap Right Hand Thread M6 x 0.75mm Pitch

  • ... a total of two taps to facilitate the alignment of the tap and the tapping hole to ensure that the tap and the hole are perpendicular to each other and tapping smoothly. It also has a smoothing effect on the thread (removes burrs). Suitable for thick steel, rubber, aluminum, copper, and wood..
  • Good Helper: Standard metric thread design, clear and tidy, provide rapid chip removal for efficient threading. Can make new threads or re‑thread damaged or jammed threads.Number Of Threads: 3. Thread Tolerance Grade: 0.014. Through Hole/Blind Hole: Through Hole. Material: High speed steel. Tap Style: Straight groove. Thread Code: Standard thread..
  • Suitable for: Suitable for most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc. Appropriate addition of coolant (e.g. water) can extend the service life when tapping..
  • Replacement for: The mini metric taps are mainly used for clocks, watches, low hardness wood and soft metal hole processing. Mainly used for hand use, tapping the vast majority of materials in through holed conditions..
Check Stock

BOSCH BPT12M125 12mm - 1.25 High-Carbon Steel Metric Plug Tap

  • Metric plug taps – engineered for cutting right-hand internal metric threads, these taps are ideal for cutting internal threads in import cars, motorcycles and machinery.
  • Heat-treated carbon steel – provides superior durability and speed.
  • Rolled threads – deliver more accuracy and are cleaner than machined threads.
  • Package dimensions:0.437"L x 1.5"W x 5.875"H.
Check Stock

53 Piece Rethreading Kit 19 Taps 32 Dies and 2 Thread Files Made in USA

  • Set Contains: 19 taps, 32 dies, of NC, NF and metric sizes and 2 thread files. Please see detailed set content in Product Description section below..
  • Ideal for restoring the stripped threads on old, rusty nuts and bolts.
  • Hex shape makes taps and dies easy to turn with any socket or wrench.
  • Can be used on national coarse, national fine and metric nuts and bolts.
  • Made in USA and Backed by Limited Lifetime Warranty against manufacturing defects.
Check Stock

Lisle 70860 Tap Socket

  • Ideal for use in areas where a T handle won't fit.
  • Sockets fits all number and fractional M.C.T.I. standard taps through 1/2".
  • Also fits 1/8" NPT taps and metric taps through 12mm manufactured to M.C.T.I. standards.
  • For more information check the main Lisle tool- 70940.
Check Stock

Hegebeck Thread Milling 3/8-16 Thread Taps Extrusion Taps H2 Thread Drill Thread Milling Plug for Manual Equipment Special Processing Consoles 1 Pcs

  • Thread Size: M4 x 0.7mm. High-speed steel taps are with high hardness and toughness for wear resistance, well suited for general purpose applications..
  • Can make new threads or re-thread damaged or jammed threads. Ti-coated taps provide capability, durability and long service life. Fits a wide range of applications..
  • Suitable for most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Appropriate addition of coolant (e.g., water) can extend the service life when tapping..
  • Standard metric thread design, clear and tidy, provide rapid chip removal for efficient threading..
  • The mini metric taps are mainly used for clocks, watches, low hardness wood and soft metal hole processing..
Check Stock

OMT SAE & Metric Tap and Die Set 80pcs | SAE Thread Types NC NF NPT | Tap Die Set Metric SAE Standard for Cutting External and Internal Threads

  • ALL-IN-ONE TAP & DIE SET: This 80-piece internal and external threading tool kit by Orion Motor Tech includes both coarse and fine taps and dies in the 34 most needed standard and metric sizes, from #4 (14/125") to 1/2 inch and from M3 to M12.
  • USER-FRIENDLY DESIGN: This tap and die set is engineered to tight tolerances to meet professional needs.
  • the tap ends are 1/5 to 2/5 inch long for easy use with the provided standard and metric wrenches.
  • CHROMIUM STEEL: The thread repair set is constructed with GCr15 bearing steel heat treated for durable and corrosion-free performance with satisfying longevity.
  • ADDITIONAL TOOLS: In addition to the 68 taps and dies, this tool set includes protective gloves, both long and T-handle wrenches, 1/8" flathead screwdrivers, and thread pitch gauges to find and carve the exact threading you need through wood, copper, aluminum, iron, steel, and more!.
  • BLOW-MOLDED CASES: Separate sturdy storage cases store and organize the SAE and metric taps and dies, providing easy organization and portability wherever you need them.
Check Stock

HORUSDY 60-Piece Master Tap and Die Set | SAE Inch and Metric Sizes | for Coarse and Fine Threads Tools

  • Made of high-quality hardened alloy steel, durable and superior strength. Suitable for cutting steel, copper, aluminum, cast iron and other materials..
  • Suitable for re-threading of fasteners and fastener holes, cutting or updating of internal and external threads. Precision milling of SAE and metric taps and molds are used for cutting raw materials or repairing existing threads, removing screws, etc..
  • All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance..
  • Set includes (20) Metric taps and dies: M3x0.5, M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.25, M9x1.25, M10x1.0, M10x1.5, M12x1.75.
  • (20) SAE Fractional taps and dies for coarse thread (UNC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12- 24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC.
  • (12) SAE Fractional taps and dies for fine thread (UNF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF.
  • Heavy-duty plastic suitcase, easy to transport, safe storage, quick to organize, prevent accessories from falling off..
Check Stock

ORION MOTOR TECH 86pc Tap and Hex Die Set in SAE and Metric | Titanium Coated Steel Tap Set and Die Tool Set for Homeowners Mechanics Metric Standard Internal External Threading(Iron Case)

  • ALL-IN-ONE TAP & DIE SET: This 86-piece internal and external threading tool kit by Orion Motor Tech includes both coarse and fine taps and dies in the most needed standard and metric sizes, from #4 (14/125") to 5/8 inch and from M3 to M16.
  • USER-FRIENDLY DESIGN: This tap and die set is engineered to tight tolerances to meet professional needs.
  • the tap ends are 1/5 to 2/5 inch long for easy use with the provided standard and metric wrenches.
  • PREMIUM DURABILITY: This tool set for homeowners, craftsmen, and mechanics is made of high-carbon chromium bearing steel.
  • titanium plating provides even greater strength, durability, and longevity so you can tackle any job with confidence.
  • ADDITIONAL TOOLS: In addition to the 78 taps and dies, this tool set includes both adjustable and T-handle wrenches, a 1/8" flathead screwdriver, and thread pitch gauges to find and carve the exact threading you need through wood, copper, aluminum, iron, steel, and more!.
  • BLOW-MOLDED CASE: The metal storage case stores and organizes the SAE and metric taps and dies, providing easy organization and portability wherever you need them.
Check Stock

20 PCS Tap and Die Set - Metric Size M3 M4 M5 M6 M7 M8 M9 M10 M12 Tap Set and Die Set Threads Tapping Threading Tool Kit with Wrench Handle Storage Box

  • 【Durability & Premium Material 】: This metric tap & die set made of industrial grade GCr15 bearing steel construction ensures durability and long....
  • 【Easy to Be Used】: Tapered design coarse and fine taps and dies to make it more smoothly and easily create and rethread internal and external....
  • 【Accuratly Cutting Performance】: Perfect threading manufacturing process,precisely CNC machined with qualified surface treatment, rockwell....
  • 【Package Included】: Contain with 9 x metric taps and 9 x metric dies in muilti normal size, (M3 x 0.5mm), (M4 x 0.7mm), (M5 x 0.8mm), (M6 x 1mm),....
  • 【Wide Application & Brand Guarantee】: It can create new threads and repair damaged threads on metals like stainless steel, copper, aluminum,....
Check Stock

DelitonGude Metric M5 Machine Screw Tap 10pcs 5% Cobalt Spiral Flute Drill Taps Metric M5 Thread Tapping Tool(M5)

  • Great product and very good quality. Made from M35 Hight-speed Steel and 5% Cobalt.The surface was nitrogen treated,which does't rust, very durable.Size:M5X0.8mm.
  • Used to make new threads or re-thread damaged or jammed threads.Spiral groove taps have a longer service life than ordinary straight groove taps and can be used repeatedly..
  • Spiral Flute design, well chip removal, Easy tapping.With spiral flute taps, it is not necessary to repeatedly advance and retreat the taps and chips during tapping, which effectively improves the tapping efficiency.
  • because the chips are unobstructed, the chips will not be blocked in the narrow flutes..
  • Strong Box package Included: 10Pcs Spiral flute Metric Taps.
  • Suitable for taping Blind hole,Such as Steel Cast Iron, Aluminum Alloy and other non-heat treater Metal,Hardness less than HRC30..
Check Stock