Top Metric Sizes

Neiko 02460A 3/4\ Drive Deep Impact Socket Set, 8 Piece Jumbo Assortment | Metric Sizes (26 to 38 mm) | Chrome Vanadium Steel

  • HEAVY DUTY BUILD: The construction of each 3/4” socket in this 8 piece set consists of extremely strong Chrome Vanadium (Cr-V) steel that will output greater torque, but also has a corrosion resistant black phosphate finish to give your sets longevity and longer lifespan..
  • LARGE SOCKET: This ¾” impact socket set is designed for use with impact wrenches. A set of 8 high-torque, 6-point Metric sockets with ¾ inch drive, each jumbo socket is used to remove tough nuts and bolts on larger vehicles..
  • SPECIAL DEEP DESIGN: Each socket has a unique design that grips the flat sides of fasteners rather than the corners to prevent stripping and rounding off of bolts. With a high torque impact gun, each Metric socket will torque the most stubborn fasteners..
  • HIGH VISIBILITY MARKINGS: The easy-to-see high-contrast laser-etched Metric size markings allow easy reading in low light settings and promote efficiency on the job..
  • INCLUDES COMMON METRIC SIZES: Includes eight common Metric socket sizes (26, 27, 29, 30, 32, 35, 36, 38 mm) with blow-mold storage case included..
Check Stock

Thread Gauge - Small Inch & Metric Sizes - Nuts, Bolts & Screws Measuring & Identification Tool

  • Used to gauge Inch fastener sizes from #1-64 through #5-40.
  • Used to gauge Metric sizes M1.2x0.25 through M3.5x0.35.
  • Offers knobs and slots with permanent, easy to read size markings that won't peel off.
  • Solid steel thread checker on wire lanyard.
Check Stock

Jumbo Thread Gauge - Large Inch & Metric Sizes - Nuts, Bolts & Screws Measuring & Identification Tool

  • Used to gauge Inch fastener sizes from 5/8"-11 through 1"-12.
  • Used to gauge Metric sizes M14x1.5 through M24x3.0.
  • Offers knobs and slots with permanent, easy to read size markings that won't peel off.
  • Solid steel thread checker on wire lanyard.
Check Stock

Wisepick 42Pcs Rethreading Tool Set Car Rethreader Restorer Repair Tool Kit Includes Metric, UNF and UNC Sizes

  • 21 Pcs Dies: Inch fine sizes: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8".
  • Inch coarse sizes: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8".
  • Metric sizes: 6x1.00, 8x1.25, 10x1.25, 10x1.50, 12x1.25, 12x1.5, 12x1.75mm.
  • 19 Pcs Taps: Inch fine sizes: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16".
  • Inch coarse sizes: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16".
  • 2 Pcs Thread Files: SAE size: 11, 12, 13, 14, 16,18, 20, 24.
Check Stock

ABN Double Box Ratcheting Wrench Set - 5pc Half-Moon Shaped Metric Wrench Set Double Ended Wrench Set from 10 to 22mm

  • [Perfect Set for Mechanics]: Get around obstacles with the half-moon ABN 5-Piece Metric Ratcheting Wrench Set.
  • 12-point double end wrenches heads encase fasteners with hex, jam, cap, and square heads.
  • [Multiple Sizes for Multiple Projects]: Box end wrench set includes a 10 and 12mm, 11 and 13mm, 14 and 16mm, 15 and 17mm, and 19 and 22mm wrenches.
  • Small lever on ratchet box wrench set allows you to switch between tightening and loosening with a finger without letting go of tool set wrenches.
  • [Easy to Use]: Get into hard-to-reach areas with metric boxend wrenches.
  • Half-moon shape allows you to maneuver around poles and pipes so your access is not limited.
  • Box wrenches design helps to eliminate fastener rounding.
  • With as little as 5 degrees, double box ratchet wrench can make adjustments.
  • [Built to Last]: Wrench ratchet set is made from high-quality steel with a chrome finish for a long tool life.
  • Help maintain box wrench ratchet set by cleaning and matching sizes to the job at hand.
  • [Optimal Leverage]: Metric ratcheting wrenches grip fastener heads tightly to prevent slippage and improve leverage.
  • Ratcheting wrench set metric sizes allow for more access and versatility to make completing a project easier and faster.
Check Stock

Craftsman Hex Key Set Triangle

  • This Craftsman Hex Key Set Triangle: Quickly switches Between sizes in Inch, Metric & Star, Has a Tripod Grip..
  • is Chrome vanadium steel construction, Quickly switches Between sizes in Inch, Metric & Star, Has a Tripod Grip..
Check Stock

TEKTON 2500 Hex Key Wrench Set, Inch/Metric, 14-Piece

  • Made from heat-treated carbon steel construction.
  • Distinct chrome plated (SAE sizes) and black oxide (Metric sizes) finishes indicate size ranges.
  • Long arm wrenches provide extra reach and greater torque.
  • 7-pc. Hex key wrenches (SAE): 1/16, 5/64, 3/32, 1/8, 5/32, 3/16, 7/32 in..
  • 7-pc. Hex key wrenches (Metric): 1.5, 2, 2.5, 3, 4, 5.5, 6 mm.
Check Stock

Nut & Bolt Thread Checker (Inch & Metric), Original Version (SWTC-26)

  • Each Size Has A Nut And Bolt Checker On The Same Gauge. 26 Male/Female Gauges - 14 Inch & 12 Metric.
  • Thread Sizes Are Permanently Stamped Onto Each Gauge (Inch In Red, Metric In White).
  • Inch Gauges Are Clear Zinc Plated, Metric Gauges Are Black Oxide.
  • The Individual Gauges Rotate Freely On The Wire Cable For Fast Thread Verification.
Check Stock

14PCS E Torx Star Female Socket Set, E4 -E24 Female External Torque Star Socket Sets, 1/2\ 3/8\ 1/4\ Drive

  • FULL RANGE: This complete metric allen torx set is the perfect torx bit set for both DIY-ers and professionals alike and ideal to use with manual torque tool..
  • SUPERIOR APPLICATIONS: Each metric Allen torx bit socket set is made of chrome vanadium steel with a chrome-mirror finish topped with a S2 steel hex bit, crafted for strength, durability, and a long life..
  • PRECISE TORQUE POWER: Allen wrench sockets provides more torque than typical Allen wrenches can provide. Our Torx/Star bit set meets and exceeds all ANSI specifications for added safety..
  • DRIVE SIZES: This metric star socket bit set includes all the essential sizes from 1/4-inch, 3/8-inch and 1/2-inch drive sizes to work on bikes, automobiles, appliances, lawn equipment, machinery, and any other jobs requiring star fasteners..
  • CONVENIENT STORAGE: This t torx socket set comes with a sturdy plastic blow mold box for safe storage and easy portability..
Check Stock

DURATECH Flare Nut Wrench Set, Standard & Metric, 10-Piece, 1/4' to 7/8'' & 9-21mm, Chrome Vanadium Steel, Organizer Pouch Included

  • Crafted from high strength drop forged Chrome Vanadium Steel with mirror polish finish. Exceeds ANSI standards..
  • Corrosion and rust resistant chrome plating finish for durability and extended tool life. Stamped brand and “CHROME VANADIUM” letters on wrench handle provides added gripping points..
  • Open side lets the wrench fit onto automotive and plumbing tubing lines. The 15 degree offset at the ends makes it possible to reach tighter places. The wrenches that exceeds ANSI standard deliver a long time of solid performance. Designed to prevent rounding out edges over time..
  • This 10pc standard and metric flare nut wrench set features 5 of the most common standard sizes and 5 common metric sizes: SAE 1/4 x 5/16, 3/8 x 7/16, 1/2 x 9/16, 5/8 x 11/16, 3/4 x 7/8 in and Metric 9 x 11, 10 x 12, 13 x 14, 15 x 17, 19 x 21 mm. Two sizes per wrench providing more options with less to carry. Wrench sizes are stamped twice on both sides of handle for easier size identification..
  • The wrench set comes with a rolling pouch for easy organization and convenient storage. The roll-up pouch has each wrench size printed which makes organizing easy. The tool pouch has two copper hanging holes for easy suspension..
Check Stock

Craftsman 75 pc Inch & Metric tap and die Set

  • Combines inch and metric sizes in 1 convenient kit.
  • Set includes: 7 drive tools with accessories, 17 inch plug taps, 17 inch hex dies, 17 metric plug taps, 17 metric hex dies & sturdy storage case with handle.
  • Hardened, precision-ground and polished carbon steel surfaces make chip removal easy.
  • Hex-shaped dies permit use of sockets and wrenches as well as die stocks.
  • Rust-resistant satin finish for smooth cuts with less friction.
Check Stock

Stainless Steel Fishtail Center Gauge Screw Thread Lathe Cutting Tool for Quick Comparison(#2)

  • Used to gauge standard fastener sizes from #6-32 through 1/2"-20.
  • Used to gauge Metric sizes M4x0.7 through M12x1.75.
  • Offers knobs and slots with permanent, easy to read size markings that won't peel off.
  • Solid steel thread checker on wire lanyard.
Check Stock