Top Metric Tapping Tool

6mm x 0.75 Metric Taper and Plug Tap Right Hand Thread M6 x 0.75mm Pitch

  • Reliable Material: High‑speed steel taps are with high hardness and wear resistance. Uncoated taps have only a basic substrate without any additional coatings, and fit a wide range of applications..
  • Practical Function: There are a total of two taps to facilitate the alignment of the tap and the tapping hole to ensure that the tap and the hole are perpendicular to each other and tapping smoothly. It also has a smoothing effect on the thread (removes burrs). Suitable for thick steel, rubber, aluminum, copper, and wood..
  • Good Helper: Standard metric thread design, clear and tidy, provide rapid chip removal for efficient threading. Can make new threads or re‑thread damaged or jammed threads.Number Of Threads: 3. Thread Tolerance Grade: 0.014. Through Hole/Blind Hole: Through Hole. Material: High speed steel. Tap Style: Straight groove. Thread Code: Standard thread..
  • Suitable for: Suitable for most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc. Appropriate addition of coolant (e.g. water) can extend the service life when tapping..
  • Replacement for: The mini metric taps are mainly used for clocks, watches, low hardness wood and soft metal hole processing. Mainly used for hand use, tapping t....
Check Stock

PGMJ 200 Pieces 9 Size M4/M5/M6/M8/M10 Metric Threaded Inserts Nuts Assortment Tool Kit for Wood Furniture Zinc Alloy Furniture Bolt Fastener Connector Hex Socket Screw Inserts

  • Good quality materials:Metric thread,made of high quality zinc alloy, hardness of high resistance to rust, wear and corrosion-resistant environmental protection and aesthetic characteristics.
  • Package include: 9 sizes include M4*10, M5*10, M6*10, M6*15, M6*18, M6*20, M8*15 M8*20, M10*25, total 200 pieces in a transparent box with can meet your different needs.
  • Usage and install: pre-drill a proper hole, screw in with internal hex tool.
  • Unique self-tapping designed external thread, contribute to tapping, with good tensile resistance, install with hex key, tapered external threads makes it not easy to pull out caused by vibration.
  • Wide application: suit for soft woods such as pine, plywood, fiberboard, etc., such as ready-to-assemble furniture, drawer pulls, display case, and shipping crates，have a good effect in the furniture combination.
  • The compartments in the box are movable, and they are are also installed underneath the box, after the tool is used up ,you can pack other things in a box, and you can freely use the compartments and recycle them.
Check Stock

PGMJ 265 Pieces 12 Size M4/M5/M6/M8/M10 Metric Threaded Inserts Nuts Assortment Tool Kit for Wood Furniture Zinc Alloy Furniture Bolt Fastener Connector Hex Socket Screw Inserts

  • Good quality materials:Metric thread,made of high quality zinc alloy, hardness of high resistance to rust, wear and corrosion-resistant environmental protection and aesthetic characteristics.
  • Package include: 12 sizes include M4*10, M5*10,M6*8, M6*10,M6*12, M6*15, M6*18, M6*20, M6*25,M8*15 M8*20, M10*25, total 265 pieces in a transparent box with can meet your different needs.
  • Usage and install: pre-drill a proper hole, screw in with internal hex tool.
  • Unique self-tapping designed external thread, contribute to tapping, with good tensile resistance, install with hex key, tapered external threads makes it not easy to pull out caused by vibration.
  • Wide application: suit for soft woods such as pine, plywood, fiberboard, etc., such as ready-to-assemble furniture, drawer pulls, display case, and shipping crates，have a good effect in the furniture combination.
  • The compartments in the box are movable, and they are are also installed underneath the box, after the tool is used up ,you can pack other things in a box, and you can freely use the compartments and recycle them.
Check Stock

Shop Fox M1099 10 by 26" Bench athe, Metal, Large

  • ...ssional capabilities at an incredible price. An indispensable workhouse in workshops for many years and featuring a small footprint suitable for home, commercial and educational use. Ideal for all kinds of precision metal work including: turning, facing, grooving, parting, threading, drilling, boring, knurling, and tapping. A true metalworking tool for professional outcomes vs. a look-a-like toy..
  • Machine features - The LittleMachineShop.com exclusive version of this machine includes a full 14" bed length for longer work pieces, a 1/3 HP variable speed spindle motor (with spindle speeds from 100 - 2500 RPM) and 2 speed ranges for low speed torque, Zero-settable hand wheels graduated in 0.001" on cross slide and compound rest, 4-way indexing tool post set for 5/16" (8 mm) tools, E-stop safety power switch, Rear apron shield, and backsplash..
  • Extended threading capability - A 16 TPI reversible lead screw for right-hand and left-hand threads, standard threading dial, and real top and bottom half-nuts, allow you to create every American Standard Unified inch screw thread from 4 to 80 threads per inch. With the extra 21 tooth change gear (included) you can create every American Standard Metric thread from 0.3 to 8.0 mm pitch..
Check Stock

Hi-Spec 39 Piece Metric Tap & Die Set. Complete M3 to M12 Fine & Coarse Tools to Cut, Chase and Thread with Screw Pitch Gauge in a Tray Case

  • CLEAN CUT RESULTS: Start DIY garage and workshop tapping and threading with the Hi-Spec 39 Piece Metric Tap and Die Tool Set. Whether its internal or external rethreading, cut new material, chase damaged or old screws, repair rusty nuts, bolts and spark plugs.
  • 34 PIECE METRIC SIZES: Most popularly used coarse and fine thread sizes and pitches of three and four flute tapered and plugged taps and dies. Metric Tap and Dies: 8 thread sizes from M3 to M12 with 16 pitch sizes plus NPT (1/8-27).
  • GOES THROUGH METALS: For materials such as carbon alloy steels, cast iron, aluminium, brass and bronze. Using premium GCr15 Alloy steel, a high carbon chromium bearing steel with high Rockwell hardness, contact fatigue performance, and corrosion resistance.
  • 3 TAP & DIE WRENCH HANDLES: Just fix the tap or dies tools into the steel alloy wrench handles with adjustable fittings and get turning. Includes a handy mini-screwdriver to assemble and fix the dies.
  • SCREW PITCH GAUGE: Easily and accurately measure the pitch or lead of a screw thread with the 16-Blade Screw Pitch Gauge. All tools and accessories are kept tidy and organised in a slimline case for simple storage and carry.
Check Stock

GMTOOLS 110PCS Tap and Die Set Metric Size Standard Threading Tool Set M2-M18 with Adjustable Handles Accessories and Storage Case Tap & Die Set for Cutting External and Internal Threads

  • [High-Quality Materials]: This metric tap set is made of high-quality hardened alloy steel, improving product hardness, wear-resistance, and increasing product service life, durable and superior strength..
  • [Excellent Performance]: Suitable for re-threading fasteners and fastener holes, cutting or updating internal and external threads. Fully ground & high-precision tap is sharp for tapping and chip removing operation, running smoothly and efficiently..
  • [Versatility]: Tapered Teeth Design starts threading more easily and smoothly, and prevents over-threading. Suit for creating new threads or repairing damaged threads on metals like carbon steel, cast iron, aluminum and stainless steel..
  • [Most Common Sizes in Metric]: This tap and die set comes with 110 pieces totally in a storage case. This metric tool set Include: 1) 35 pcs plug taps.
  • [Portable Case]: Each tap and dies set is equipped with a iron toolbox which is engraved with corresponding scales. And it’s convenient to store them in the case to prevent dust..
Check Stock

Car License Plate Screw Bolt Cap -Alloy Metal Motorbike Tag Fastener with Skull Cap Covers Decorative Vehicle License Plate Frame Screws Mounting Hardware 4PCS

  • ① This license plate screw kits includes 4 different types and sizes of screws and bolts: M6*12mm short bolts, M6*25mm extended long phillips bolts, M6*25mm self-tapping screws, and M6*20 anti-theft mechanical bolts which meet the needs of front and rear license plate mount.
  • ② Using 304 stainless steel and alloy, all materials with highest rust and corrosion resistance. The silver chrome screws are uncoated, keep the license plate cool, clean and tidy. Including self-tapping screws, machine bolts and nut, complete license plate fasteners.
  • ③ The silver license plate screw cap with skull logotype, each skull sticker is printed on high quality automotive grade vinyl gel with high resolution graphics, is a nice tool decorative car accessory for motorcycles, cars, trucks, trailers.
  • ④ 4pcs Hexagon socket head anti-theft metric bolts, security screws can keep the thief away from your car, keep safe and convenience.
  • ⑤ Phillips screws do not need to use special tools, you can easily install the car tag plate.
Check Stock

Union Butterfield 1580(M) High-Speed Steel Thread Forming Tap, Uncoated (Bright) Finish, Round Shank with Square End, Bottoming Chamfer, M6-1.00 Thread Size

  • Cold-forms threads in through holes and blind holes without producing chips.
  • Spiral forming lobe pattern for reducing tapping torque.
  • High-speed steel for compatibility with a variety of materials.
  • Produces ANSI standard right-hand threads in metric sizes.
  • Round shank with square end to help minimize rotation in the tool holder.
Check Stock

ATOPLEE Metric Thread Tap,M12 HSS Right Hand Thread Tap (M12x1.25)

  • 【Material】This thread tap is made of HSS 6542, which is stronger and more durable than ordinary taps..
  • 【Size】Thread Diameter:12mm,Total Length:88mm.
  • Shank Diameter:9mm, Pitch:1.25mm；Thread Length：28mm..
  • Square Head Size:6.8x 6.8mm (L*W) ,Net Weight:0.045 kg.
  • 【Usage】When using this product for tapping, it can be used with manual equipment or special processing consoles, such as tapping machines, drill-in-one bench drills, CNC lathes, machining centers, etc. With this product, you can finish tapping on stainless steel, iron, aluminum, copper, general steel and other materials..
  • 【Package Included】 1pcs Metric Right hand Thread Tap.
Check Stock

50Pcs Stainless Steel Inner Thread Self Tapping Thread Inserts Set Thread Reinforce Repair Tool M3-M12 with a Storage Case

  • Threaded inserts are made of high quality stainless steel ,anti-corrosion and rust, good toughness, high hardness and low abrasion..
  • With certain elasticity and even load，metric thread inserts are resistant to vibration to avoid loosening..
  • Tapping Inserts can be used repeatedly, can also repair the damaged thread by installing into thread hole..
  • These wire threaded inserts are easy and quick to install,only need one assembly tool..
  • Thread reducer can greatly improve the strength and stability of screw connections..
Check Stock

Hi-Spec 39 Piece SAE & Metric Tap & Die Set. Complete M3 to M12 \\/ #4 to 1\\/2in Fine & Coarse Tools to Cut, Chase and Thread with Screw Pitch Gauge in a Tray Case

  • CLEAN CUT RESULTS: Start DIY garage and workshop tapping and threading with the Hi-Spec 39 Piece SAE & Metric Tap and Die Tool Set. Whether its internal or external rethreading, cut new material, chase damaged or old screws, repair rusty nuts, bolts and spark plugs.
  • 34 PIECE SAE & METRIC SIZES: Most popularly used coarse and fine thread sizes and pitches of three and four flute tapered and plugged taps and dies. SAE & Metric Tap and Dies: 16 thread sizes from M3 to M12 and #4 to 1/2in with 16 pitch sizes plus NPT (1/8-27).
  • GOES THROUGH METALS: For materials such as carbon alloy steels, cast iron, aluminium, brass and bronze. Using premium GCr15 Alloy steel, a high carbon chromium bearing steel with high Rockwell hardness, contact fatigue performance, and corrosion resistance.
  • 3 TAP & DIE WRENCH HANDLES: Just fix the tap or dies tools into the steel alloy wrench handles with adjustable fittings and get turning. Includes a handy mini-screwdriver to assemble and fix the dies.
  • SCREW PITCH GAUGE: Easily and accurately measure the pitch or lead of a screw thread with the 16-Blade Screw Pitch Gauge. All tools and accessories are kept tidy and organised in a slimline case for simple storage and carry.
Check Stock

QLOUNI 130 Pieces M4/M5/M6/M8/M10 Metric Threaded Inserts Nuts Assortment Tool Kit for Wood Furniture Zinc Alloy Furniture Bolt Fastener Connector Hex Socket Screw Inserts

  • 【Package Includes】Hex socket flanged threaded insert nuts assortment kit are in 7sizes, M4 x 10, M5 x 10, M6 x 10, M6 x 15, M8 x 15, M8 x 20, M10 x 20, total 130 pieces in a transparent box with can meet your different needs..
  • 【Premium Material】Metric thread are made of high quality zinc alloy, hardness of high resistance to rust, wear resistant, durable and aesthetic characteristics..
  • 【Usage & Install】Pre-drill a proper hole, screw in with internal hex tool.
  • Unique self-tapping designed external thread, contribute to tapping, with good tensile resistance, install with hex key, tapered external threads makes it not easy to pull out caused by vibration..
  • 【Wide Application】Suitable for soft woods such as pine, plywood, fiberboard, etc., such as ready-to-assemble furniture, drawer pulls, display case, and shipping crates, have a good effect in the furniture combination..
  • 【Storage Box for Convenient Use】These mixed insert nuts are stored in separate grids, so it’s easy for you to pick out the ones you need quickly. Helpful for saving your time and energy..
Check Stock