Top Mf52e Type Ntc Thermistor

3PCS HT-NTC100K Thermistor Sensor for Creality Ender 3 v2 Upgrade 3x15mm 3950 Compatible with E 3D V6 Volcano PT100 Ender-3-5 Pro CR10 3D Printer

  • 【Ender 3 Thermistor, Upgrade HT-NTC100K Thermistor】Cartridge temperature sensor. Metal head diameter: 3mm, head length: 15mm,cable wire length: 1 meter,connector: XH2.54 2PIN, （Suitable for heating blocks with holes of 3mm*15mm-3mm*20mm）.
  • 【Widly Compatibility】Product recommended operating temperature -50 °C ~ +280 °C, can replace the cartridge K-type thermocouple temperature sensor. Suitable to print multi kinds of filament.Compatible with the heatblocks with 3mm hole,such as: V6 Volcano PT100 type heated block,CR10 plated copper high temperature heating block,etc.
  • 【High Stability and Accuracy 】Encapsulated in copper case,copper material has better thermal conductivity than stainless steel and improves accuracy.Secured with high temperature adhesive,high stability, no falling off.The internal temperature package to ensure the maximum service life with precision temperature measurement..
  • 【Long Service Life】Compared with other products of the same type that are insulated with ordinary heat shrinkable tubes, this product uses glass fiber with a temperature resistance of 400C degrees for insulation to avoid the possibility of thermal short circuit during high temperature work. Thereby increasing the service life..
Check Stock

Wholesale Sensors Replacement for Whirlpool 2188819 Thermistor 12 Month Warranty

  • The NTC thermistors Value: 1K ohm, 2K ohm, 5K ohm, 10K ohm,20K ohm, 50K ohm, 100K ohm, 200K ohm, 500K ohm, 1M ohm.
  • Characteristic: Small size and large power,large B value with wide range of operating temperature..
  • Easy to Sort: Each model has a small bag and a mark. Box also has a marked model for easy identification..
  • Easy to store: Provide a high-quality box for easy management and storage..
  • More values: Provide 10 commonly used NTC Thermistor Resistors values to help you more convenient for related equipment with temperature measurement and controls thermal protection circuits in various family appliances.
Check Stock

Wholesale Sensors Replacement for Norcold 618548 Thermistor Assembly 12 Month Warranty

  • The NTC thermistors Value: 3D-25,5D-7,5D-9,5D-11,5D-15,8D-9,10D-9,10D-11,20D-9,47D-15.
  • Characteristic: Small size and large power，large B value with wide range of operating temperature..
  • Easy to Sort: Each model has a small bag and a mark. Box also has a marked model for easy identification..
  • Easy to store: Provide a high-quality box for easy management and storage..
  • More values: Provide 10 commonly used NTC Thermistor Resistors values to help you more convenient for controlling the inrush current of motor, heaters, bulb voltage stabilizer, electronic energy-saving lamp, etc..
Check Stock

5-PCS Ender 3 Thermistor HT-NTC100K 3D Printer ntc 3950 100K Thermistor Sensor for Creality Ender 3 v2 Thermistor Upgrade Compatible with E3D V6 Volcano PT100 Ender-3-5 Pro CR10 hotend,

  • （Ender 3 Thermistor, Upgrade HT-NTC100K Thermistor (1 meter each)）：Cartridge temperature sensor. Metal head diameter: 3mm, head length: 15mm,cable wire length: 1 meter,connector: XH2.54 2PIN, （Suitable for heating blocks with holes of 3mm*15mm-3mm*20mm）.
  • Compatibility：Product recommended operating temperature -50 °C ~ +280 °C, can replace the cartridge K-type thermocouple temperature sensor. Suitable to print multi kinds of filament.Compatible with the heatblocks with 3mm hole,such as: V6 Volcano PT100 type heated block,CR10 plated copper high temperature heating block,etc.
  • Stability and Accuracy：Encapsulated in copper case,copper material has better thermal conductivity than stainless steel and improves accuracy.Secured with high temperature adhesive,high stability, no falling off.The internal temperature package to ensure the maximum service life with precision temperature measurement..
  • Long Service Life：Compared with other products of the same type that are insulated with ordinary heat shrinkable tubes, this product uses glass fiber with a temperature resistance of 400C degrees for insulation to avoid the possibility of thermal short circuit during high temperature work. Thereby increasing the service life..
Check Stock

638285 Replacement Thermistor for Norcold, 12-Month Warranty

  • FEATURES: MF58 10K Ohm NTC Thermistors with B Value: 3950(+/-1%).
  • DESIGN: Glass sealed packaging with firm structure, small size and light weight, applicable in severe environments.
  • PERFORMANCE: High precision resistance, B values with high reliability and stability, high sensitivity.
  • APPLICATION: Suitable for related equipment with temperature measurement and controls thermal protection circuits in various family appliances.
  • PACKAGE: 20 Piece x Electrical Axial Lead NTC Thermistors Resistors.
Check Stock

Fielect NTC Thermistor Resistors 8D-20 6A 8 Ohm Inrush Current Limiter Temperature Sensors Pack of 5

  • High sensitivity. Quick response. Compact structure.
  • Easy installation, wide temperature range and good stability.
  • High reliability. Can provide different R.B value products.
  • Package includes: 2* NTC 3950 100K Thermistor.
Check Stock

KOKISO NTC Thermistor Resistors 10 Values 81 PCS Inrush Current Limiter Temperature Sensors Assorted Kit Assortment 3D-25,5D-7,5D-9,5D-11,5D-15,8D-9,10D-9,10D-11,20D-9,47D-15

  • The NTC thermistors Value: 3D-25,5D-7,5D-9,5D-11,5D-15,8D-9,10D-9,10D-11,20D-9,47D-15.
  • Characteristic: Small size and large power，large B value with wide range of operating temperature..
  • Easy to Sort: Each model has a small bag and a mark. Box also has a marked model for easy identification..
  • Easy to store: Provide a high-quality box for easy management and storage..
  • More values: Provide 10 commonly used NTC Thermistor Resistors values to help you more convenient for controlling the inrush current of motor, heaters, bulb voltage stabilizer, electronic energy-saving lamp, etc..
Check Stock

[Gulfcoast Robotics] All Metal V6 Bowden Extruder Hotend for 12V 3D Printer 1.75mm Filament / 0.4mm Nozzle

  • Link to online assembly and configuration instructions is printed on the package.
  • Our hotend comes with original design silicone protective sock.
  • 12V 40W heater, 12V fan, NTC 3950 pre-wired thermistor are included in the kit.
  • Includes 1 meter long 4mm OD 2mm ID bowden line PTFE tubing.
Check Stock

2pcs STC-1000 Digital Temperature Controller DC 12V 10A Digital LED Temperature Controller Thermostat Control Switch 2 Relay Output Cooling Heating and NTC Sensor Probe

  • 【STC-1000 Digital Temperature Controller】Temperature Control Range: -50℃~99℃. Control Accuracy: ±1℃. Control temperature by setting the temperature setting value and the difference value.
  • Temperature calibration. Easy operation, to set start temperature, stop temperature, corrected temperature correction, delay start..
  • 【STC 1000 Digital Thermostat】This STC-1000 digital dual relay thermostat is made of ABS flame retardant shell, a variety of fields perfect use, convenient operation and practical settings..
  • 【Heating and Cooling Function】Two work mode: Heating ( start temperature is less than stop temperature).
  • Cooling ( start temperature is above than stop temperature). Refrigerating contro, output delay protection..
  • 【NTC Waterproof Sensor Probe】Digital temperature controller 12V is equipped with 1M waterproof probe, can be used in moisture and water environment, you can use it in home brewing, fridge, incubation, fermentation, seedling heat mat, accelerating germination..
  • 【Package Contains】2 Pack STC-1000 temperature controller thermostat control switch 2 relay output cooling heating and ntc 10k thermistor sensors temperature probe. (Please kindly note no outlets, wirring needed.
Check Stock

300 X 300mm (Approx. 12' X 12') 120V 750W, KEENOVO Universal Flexible Silicone Heater Mat/Pad, 3D Printer Heated Bed Heating Element

  • Wonderful silicone heater for your 3D printer heat-bed. Fast Heating with 5.2W per square inch..
  • surface mount NTC 100K thermistor ( R-T table available).
  • 3M adhesive backing offers excellent and easy mounting..
  • Versatile and may be used in many other applications..
Check Stock

24V 40W 620 Ceramic Cartridge Heater with 3950 100K NTC Thermistor with 1 Meter Wiring for RepRap 3D Printer Heatbed Hot End

  • 1 Meter long wire with high temperature PTFE insulated wiring and female pin head, 1.25mmx2.0mm glass bead.
  • Temperature sensor 100KΩ accuracy of ± 1%.
  • 24V 40W 620 Ceramic Cartridge Heater and NTC Thermistor 100K 3950 for 3D Printer Creality CR-10S Pro, CR-X,Ender 3,Ender 3 Pro, Ender 3 V2,Prusa....
Check Stock

Genuine E3D Hotend Thermistor Cartridge Replacement

  • Direct replacement of cartridge type thermistor in E3D hotends..
  • A custom made thermistor encapsulated into an easy to use cartridge package..
  • Comes with (1) Hotend Thermistor with attached connector and (1) connector cable measuring 40 inches (101cm).
Check Stock