Top Micro Dc Geared Motor

Family Sew FS-388 9\ Flat Bed Straight Stitch and 5mm Zigzag Portable Walking Foot Sewing Machine With Metal Parts for Upholstery

  • Cleated positraction belts combine with new geared hand wheel pulley, geared reduction pulley and geared motor pulley to eliminate slipping.
  • Special heavy duty motor attached up to 150 watts, 1.5 amps, twice as much as home sewing machines.
  • High lift walking foot with 1/4" clearance underneath the foot.
  • Uses standard upholstery needles: 135x17, size 22, 20, 18, etc..
  • Power: 6600 RPM, 150 watts, 1.5 amp motor.
Check Stock

Volodymyr Zelenskyy - Sixth & Current President of Ukraine - 8inch Bust

  • 6V or 12V 30:1 Metal DC Geared-Down Motor 37Dx67.5L mm, with 64 CPR Encoder and Metal Mounting Bracket Kit, D-shaped Output Shaft 6mm Diameter and Long 16mm.
  • No-load Speed: @ 6V: 115 RPM, @ 12V: 330 RPM.
  • Stall Torque: @ 6V: 7.5 kg.cm (101 oz.in), @ 12V: 14 kg.cm (190 oz.in).
  • for Projects Such as Robots, Measuring Devices, Medical Equipment, Smart Balance Car, RC Car Model, Smart Home Appliance, Custom Servo, DIY Engine Toy. Compatible with Arduino Motherboards..
Check Stock

Stepper Motor Mounting Bracket, 6pcs Steel Motor Mounting Nema17 Bracket, with Mounting Screws

  • Mounts are thick 2mm metal bent into an L shape. spot-welded 2 little triangle-shaped wedges in the corners. Ideal for replacement applications..
  • Stepper motor bracket durable alloy steel provides strong bearing pressure when printing..
  • Nema17 brackets are 2 long slots so you could easily loosen screws, tighten the belt tension of the motor and belt, and tighten them back down easily..
  • Stepper motor alloy steel mounting bracket can match standard Nema 17 stepper motor, and also include the mounting holes for Nema 17 economy planetary geared stepper motor but not for high precision planetary geared stepper motor..
  • 6 pcs of NEMA 7 stepper motor mounting brackets, 90 degrees L-shaped bracket there are 4 holes drilled to mount for 3D Printer Motors Nema 17 Stepper Motor 42-40 Motor..
Check Stock

Greartisan DC 12V 60RPM 7Kg.cm 8mm Single Shaft Self-Locking Reversible Worm Gear Motor with Cable, High Torque Speed Reduction Motor, Turbine Electric Gearbox Motor

  • 【High Torque & Lower Noise】: Long carbon brush high life, high precision gear design, small size, high torque, low noise, high efficiency..
  • 【Positive-Negative Rotation】This type is miniature High Torque Electric Worm Gear DC Motor, which can change shaft rotation direction while the wiring positive andnegative be changed..
  • 【Self-Locking】: Turbo worm geared motor with self-lock, that is, in the case of motor without electric, the output axis is fixed, self-lock..
  • 【Versatile】: The reducer output shaft arranged vertically with the motor shaft, whole motor output is relatively short,can be widely used in various of occasions that require special installation size..
  • 【Application】: Boat, Car, Fan, Home Appliance, BBQ, Machinery and equipment, automation instruments, electric curtain, stage lighting, counter, faucet, safe, wet towel dispenser, vending machines, automatic monitoring and other modern art..
Check Stock

Metal Gear Motor, 1Pcs 25Mm Dc 12V 25Ga-370 Low Speed Metal Gear Motor for Electronic Lock, Robot, Electric Curtain, Electric Door, Micro Mixer(12V 300RPM)

  • This product is a DC gear motor with high precision metal gear, stable working.
  • This DC motor features large moment of force, low speed, and low noise..
  • The motor is made of metal gear, wear-resisting, avoid tooth breaking, so with long serving life..
  • This motor is adopted of pure copper wire coil, with low heat and low loss..
  • Widely used in electronic lock, robot, electric curtain, electric door, micro mixer, monitoring equipment, pet feeding machine.
Check Stock

Fielect 2Pcs 6V DC Motor with Wire 7000RPM Micro Motor Electric Motor Round Shaft for RC Boat Toys Model DIY Hobby

  • 【Dimension】 - Shaft Diameter: 3.17mm/0.12".
  • 【Features】- DC micro motor is durable, stable performance, shockproof, wear-resistant, and high precision. It is an excellent substitute for rusty or damaged DC motors on the machine.
  • 【Material】 - The electric motor is made of metal, and the output shaft is made of high-hardness copper, which has good toughness and impact resistance.
  • 【Application】 - Micro motors are used in electronic game machine printers, rear-view mirrors, headlight beam level adjusters, car toys, DIY hand drills, electronic equipment, etc.
Check Stock

sb components Motor Driver Board for The BBC Micro bit 2 Channel DC Motors and 3 Channel Servos Motors Motor Driver for Micro bit BBC microbit Motor Driver Board

  • micro:bit edge connector, directly pluggable.
  • 2x DC motor interfaces, 3x servo interfaces.
  • Integrates 5V regulator, up to 3A output current.
  • Onboard multi connector options for DC motors in different specifications, onboard standard servo headers.
Check Stock

uxcell DC 3V 5RPM Micro Speed Reduction Motor Mini Gear Box Motor with 2 Terminals for RC Car Robot Model DIY Engine Toy

  • Small speed reducing motor with metal gearbox increases torque..
  • Micro gearbox motor for DIY RC Hobby, vehicles, drones, planes and more..
  • Mini dc gear motor is small and lightweight to easily mount a wheel on the motor's output shaft or copter blade..
Check Stock

YXQ DC 3-12V Water Pumping Electric Micro Pump Motor RS-360SH

  • Motor Size : 27 x 32 mm / 1" x 1.2" (D*L).
  • Pump Head Size : 45 x 37 x 20 mm / 1.75" x 1.4" x 0.8" (L*W*H).
Check Stock

Gear Motor with Speed Controller AC110V 6W Electric Single-Phase Motor 1500PRM Variable Speed Reduction Gear Reducer Motor with High Torque (Reduction Ratio: 1:50)

  • 【STABLE OPERATION】The 6W geared motor can reach the speed of 27RPM, thus ensuring stable operation. The motor has low noise, long service life and flexible installation..
  • 【SPEED CONTROLLER】The single-phase motor also has a reduction gear box and a governor. The governor has a large torque and a variety of optional speeds. You can adjust the speed according to different products to achieve the desired effect..
  • 【MAIN PARAMETER】Rated voltage: AC110 V.
  • 6W geared motor：88 * 60 * 50mm / 3.4 x 2.3 x 1.9in (Appr.).
  • Reducer size: 43 * 60 * 50mm / 1.7 x 2.3 x 1.9in (Appr.).
  • 【WIDE APPLICATION】The geared AC motor has a built-in precision stator and pure copper coil, which is stable, reliable and fast in heat dissipation. It is widely used in packaging, printing, textile, food, construction machinery and other industries..
  • 【GUARANTEE】We are committed to providing you with high-quality customer service, please tell us if you receive our product with any unpleasure, we will try our best to help you as soon as we could..
Check Stock

STEPPERONLINE NEMA 23 Stepper Motor (Economy Geared Stepper Motor) Alloy Steel Mounting Bracket ST-M2

  • Please attention: NOT suitable for High Precision Geared Stepper Motor.
Check Stock

110V 90W Ac Gear Motor Electric Single-Phase Motor Gear Motor 0-67RPM Electric Variable Speed Adjustable Controller Governor Geared Motor and Adjustable Speed Controller Combo (Reduction Ratio:1:20)

  • [WIDE APPLICATION] This is a geared AC motor with a working voltage of AC 110V.Less noise, stronger.It's an electric motor, widely used in homes, handcrafts, school projects, model churning soda machines, low-speed machines, and any other product you want.Its stability is strong, the use is more assured, also has the governor, the use can be more convenient..
  • [PREMIUM MATERIAL] The 90W geared motor can reach an ultra-fast speed of 67 RPM, thus ensuring high efficiency. The motor has the characteristics of heat resistance, low noise, high quality and long service life. Structure, easy to carry and operate..
  • [ADJUSTABLE SPEED] The single-phase motor also has a reduction gear box and a governor, the speed regulator has a large torque, with a variety of optional speeds.Therefore, it is more convenient to use. You can adjust different speed according to different products to achieve the desired effect. It is very convenient and fast to use..
  • [SPECIFICATIONS] Name: AC gear motor. Rated voltage: 110V. Rated speed: 0-67 RPM. Reduction ratio: 1:20(20K). Torque: 13nm. Power Phase: single-phase. Shaft diameter：12mm. Geared motor size：164MM * 90MM *74MM. Reducer size: 61*90*74mm. Packing list:1 x motor, 1 x reducer, 1 x speed controller..
Check Stock