Top Micro Pc Power Supply

Patioer 4 Channels Mini USB Audio Mixer Amplifier Console bluetooth Recording Phantom

  • Built in bluetooth function, can work with electronic digital devices with a audio interface, like smartphone, tablet, laptop, pc. Wirelessly stream music from your device directly to your mixer..
  • Sound card function, connect the mixer to the PC by a USB data cable, then you can directly process computer vocal music..
  • USB Interface, Connect your external U disk, computer PC, flash drive or Bluetooth device to mix and use..
  • Lightweight and Portable, can be directly connected to the PC’s USB port power supply, suitable for indoor and outdoor work.Built-in 48V phantom power supply for condenser microphone direct power supply..
  • Perfect for stage performance, family K songs, network anchors, music creation, etc..
Check Stock

KDMPOWER MIPC-M7350C Micro ATX 350W Power Supply

  • KDMPOWER 350W MIPC-M7350C MICRO ATX Power Supply.
  • Micro SFX power supplies are known mostly as a replacement power supply and can also be used for mini-ATX cases.
  • 115V/230V switchable power supply (International compatible) Compatible with ATX 12V.
  • 100% compatible with the following models: In-Win IP-P300BN1-0 Power Man Sparkle FSP FSP300-60GHS FSP270-50SNV FSP270-50SNVS FSP300-60GLS-MJR FSP300-60GHS-R FSP200-50SNV FSP300-60GNV FSP300-60GLS FSP300-62GL.
  • Astec ATX202-3515 Bestec ATX-1523F ATX-1523D ATX-100-5 ATX-151 5184-2191 TTGI FP-250U Apex ALLIED AL-8250SFX AL-B200SFX Logisys PS350MA ISP 120SI AP-MP4ATX30.
Check Stock

MetroVac ED-500-ESD Anti-Satatic Electric Duster 500, 1 Pack

  • .75 peak HP Motor and an All-steel Body Hat is Built to Last Throughout Years of Tough Professional Use.
  • 3 conductor grounded power supply cord, plus, an anti-static dusting system and grounding.
  • Anti-static wrist strap that are carefully designed to minimize cling and maximize equipment efficiency.
  • Accessories: ESD Safe Crevice Tool, Dust Brush, 4 Pc Micro Cleaning Tool Kit, & TechniStat Grounded Wrist Strap.
Check Stock

AITRIP 2PCS Type-C USB CH340 5V 16MHz for Nano Board CH340/ATmega+328P , Type-C Connection Compatible with Arduino Nano V3.0

  • The Nano can be powered via the Type-C USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source..
  • Support for external 5V~12V DC power supply, Support power supply by 9V battery..
  • The Nano is using the chips ATmega328P and CH340, Replace FT232RL.
  • The Nano-C is breadboard-friendly and can be powered by USB, regulated 5V supply or unregulated 7-12V source. Connectors shipped unsoldered to fit the smallest of spaces.
  • Comes with 2packs of Nano V3.0 Micro Controller Module, each Nano V3.0 Micro Controller module is equipped with 3pcs pin headers (2pcs 15pin headers +1pcs 6pin headers), no welding needed..
Check Stock

Rotary Tattoo Machine Kit, ATOMUS Tattoo Pen Style Cartridge Machine Gun Liner Shader with Power Supply 50pcs Mixed RL RS Cartridge Needles Foot Pedal DC Cord Bandage (Black)

  • ★ Complete Tattoo Pen Machine Kit: Package includes 1pc Tattoo Pen Machine, 1pc Power Supply with 1pc Power Cable, 1pc Foot Pedal, 1pc DC Cord, 1pc Tattoo Self-adhesive Elastic Bandage and 50pcs Mixed Cartridge Needles. Professional tattoo pen machine kit for both beginners and artists..
  • ★ Tattoo Long Pen Machine: Ergonomic pen-style machine offers you a better user-experience. Just rotate the tattoo machine pen to adjust the needle's length. 9000 R/Minute, strong and powerful, available for shading and lining. Stable operation between 6-9V with DC cord connection. The tattoo machine has old and new style, we will send style randomly, please kindly note that before placing an order..
  • ★ Power Supply: 2 Optional Modes: Press Once: The red indicator is on, the power supply enters the Working Mode, you do not need to control the foot pedal all the time. Twice Press: The red indicator is off, you need to control the foot pedal all the time to use the tattoo machine. The tattoo power supply will automatic power off when it is in abnormal current, this function can protect the power supply from current overload damage and prolong its service life..
  • ★ 50pcs Mixed Cartridge Needles: 10pcs of each 3RL/5RL/7RL/3RS/5RS model. Can prevent ink leakage or pigm....
Check Stock

Aluminum MATX-Case Desktop PC-Case Tower-Chassis - Supporting ATX&SFX/SFX-L Power Supply/MATX& DTX&ITX Motherboard/360/240/120 Water Cooling& Air Cooling…

  • 【Small volume&large capacity】 With much Smaller Size compared with traditional Micro PC case but with big capacity and more hardware compatibility functions for personal computer home using, students &gamers.
  • 【Outstanding side Panel design】 Aluminum side panel seamless connected with half part of transparent tempered glass design makes the micro atx case standing out in many micro computer cases.
  • 【Unique installation design】 Support ATX&SFX/SFX-L power supply and support graphic cards with vertical installing(Charming lights can be seem) and side lying installing which attracts countless gaming case ITX, ATX &MATX gaming pc case lovers.
  • 【Exquisite workmanship】 All edage parts of the case is CNC polished by hand with exquisite workmanship. The hidden screw installation method makes the side panel smooth and exquisite, and allows ATX/mATX case fans to install the case tools free.
  • 【High efficent heat dissipation】 Can be installed with air cooling & 360/240/120 water cooling, making the heat dissipation performance much higher than ordinary Mid Tower ATX Case.
Check Stock

RackSolutions Wall Mount for Dell Optiplex Micro with VESA Mount

  • MICRO FORM FACTOR COMPATIBLE: Fits the OptiPlex 3020 Micro, 3040 MFF, 3046 MFF, 3050 MFF, 3060 MFF, 3070 MFF, 3080 MFF, 5050 MFF, 5060 MFF, 5070 MFF, 5080 MFF, 7040 MFF, 7050 MFF, 7060 MFF, 7070 MFF and 7080 MFF (PC and Monitor are not included).
  • VESA MOUNTING: Use 75 x 75mm or 100 x 100mm VESA hole patterns to mount a Dell Optiplex Micro PC to the back of a VESA compatible computer monitor (see specifications sheet for VESA Standards Guide)..
  • POWER ADAPTER MANAGEMENT: Using obrounds punched into the bends of the Dell OptiPlex Micro PC Wall Mount, velcro can be used to secure the power adapter to the side of the mount..
  • PROTECT YOUR PC: Mounting your Dell OptiPlex MFF or VESA compatible monitor on the wall will be less vulnerable to being knocked over, dropped, or other common hazards causing damage to your computer..
  • MADE FROM STEEL IN THE UNITED STATES: RackSolutions manufactures their products with high-quality steel and ships directly from our Texas-based facility..
Check Stock

Multi 5-in-1 Lightning+Type C+USB A Card Reader for iPhone/iPad/Android/Mac Book/Computer/Tablet/Camera/Hard Disk/Flash Drive,OTG Memory Adapter for SD/Micro SD/SDHC/SDXC/MMC—MFI

  • ... port, such as New MacBook 2016-2019, iPad Pro. Suitable Compatible with Samsung Galaxy Google Pixel etc. Also support all devices have the USB A port.Suit for all kinds of Dash Cam/Trial Camera/Digital Camera memory cards..
  • 【Wide Compatibility】The card reader have 1*SD slot,1*Micro SD(TF) slot,1*lightning power supply port ,2*USB A slots.The SD/TF slots are compatible with 6 different Memory Card:SD/SDHC/SDXC/Micro SD/Micro SDHC/Micro SDXC.With the lighting charging port, you will never worry about the power shortage when transferring photos.This adapter is perfect for a variety of devices like keyboards, Mouse, game Pad,flash drives, hard disk,Type C smartphones, iPhone, iPad, MacBook,and others..
  • 【Simultaneously Reading&Writing & Plug and Play】This USB C SD card reader Supports reading and writing two cards simultaneously. You can easily review files or back up and archive photos and videos in SD/TF cards.No drive needed for various of operation system. You can transfer picture or video from Phone/Tablet/PC to SD/TF card or from SD/TF card to Phone/Tablet/PC..
  • 【Superior Durability& Travel Size】Upgraded multifunction, compact and portable design, more powerful and easy to carry. SD card holder built-in reinforced cable, Tin-plated pure cop....
Check Stock

KEYESTUDIO Pro Micro Atmega32U4 5V with USB Cable for Arduino Projects 1PC

  • It includes four analog inputs, five PWM pins, twelve digital inputs/outputs and hardware serial port Rx and Tx..
  • Operating voltage is 5V and working frequency is 16MHz ，and we can supply power via micro USB cable and port RAW GND (DC 7-9V)..
  • The anode of power supply board must be connected to the "RAW".
  • We also added a PTC fuse and diode to protect power supply circuit..
  • How to use: search for "KEYESTUDIO WIKI KS0503" in Google Chrome to get the wiki online tutorial for this Pro Micro..
Check Stock

Geekworm X820 V3.0 2.5“ SATA HDD/SSD Storage Expansion Board, USB 3.0 Mobile Hard Disk Module for Raspberry Pi 3 B+/3B/ROCK64/Tinker Board&2.5 Inch SATA HDD/SSD

  • ✔ Please use this high quality certified DC 5V 4A power supply(ASIN :B07413Q5Y4).Power supply request: 5Vdc +/-5% , 4A.
  • The power adapter not only powers Raspberry Pi board but also powers your SSD or HDD. If the power is low, the SSD/HDD may not be identified or damage your RPi or X820 board. [Do Not Use ASIN:B01K0608A0!!!].
  • ✔ Raspberry Pi SATA X820 V3.0 HDD/SSD USB3.0 shield expansion board provides an complete storage solution for Raspberry Pi motherboard/ROCK64, Support up to 4TB 2.5 inch SATA interface hard disk drives (HDD) / solid-state drive (SSD). A good raspberry pi sata adapter for Raspberry Pi 3B+, 3B, 2B, B+, ROCK64. Note: For Raspberry Pi 4 Model B 2.5 inch SATA HDD/SSD storage board, please refer to ASIN:B07VXF2HJG.
  • For Raspberry Pi 4 Model B mSATA SSD storage board, please refer to ASIN: B07VXFGFLX.
  • ✔ X820 V3.0 supports USB booting from your HDD/SSD('reboot' command is supported), a useful and reliable function to every raspberry pi users or fans. Suggest to use with geekworm x820 metal case(ASIN :B07GRZRW7J).
  • User manual, pls refer to Geekworm WiKi search(X820)..
  • ✔ Powers the Raspberry Pi via Pi's 40-pin header or Micro USB socket.
  • Furthermore, On-board XH2.54 connector and USB power socket (5V 2A output) to power other devices,....
Check Stock

Tattoo Power Supply, Beoncall Dual Digital LCD Tattoo Machine Gun Power Supply Multifunctional Tattoo Machine Power Kit with Foot Pedal Clip Cord for Tattoo Machine Gun Tattoo Supply

  • EASY TO USE - This tattoo power supply has turn knob for easy voltage adjustments, digital voltage display, and continuous pedal mode. Easy Control, Lightweight, Smooth Current. Suit for all kinds of rotary and coil tattoo machine gun and tattoo foot pedal..
  • LCD DISPLAY - This tattoo power supply LCD display built in magnet for easy mount on metal surface. The ultra bright digital LED screen display makes easier to read accurate readout.Two foot pedal modes - maintained or momentary, 1/4" mono jack inputs..
  • PROFESSIONAL TATTOO TOOL - Stainless steel foot switch pedal with anti-slip and damage-free base. Sturdy springs and long-life rubber-silicone insulated wire clips for firm machine contact for all tattoo power supplies for a better quality experience for tattooists..
  • TATTOO POWER KIT - The tattoo power supply set including 1pc LCD Dual tattoo power supply, 1pc power cord, 1pc stainless steel tattoo foot pedal, 1pcs tattoo clip cord. Perfectly used for tattoo beginners or professional tattoo artists..
  • 100% SATISFACTION GUARANTEED - For any problem about this tattoo power supply with foot pedal and clip cord, please contact us via AMAZON, we will do our best to solve all your problems! we offer a full refund or free replacement..
Check Stock

aigo AR12 3-Pack 120mm RGB Case Fan ARGB Addressable Motherboard SYNC Cooling SATA Interface PC Fans with Controller for Computer Case

  • 【5V ARGB Addressable RGB】If your motherboard has RGB function,our fans could synchronize the lights of the motherboard completely!Make you enjoy the high consistency of lighting..
  • 【The Fan Blade Design】The fan blade design can lower the noise effective and bring more airflow..
  • 【Anti Shock Design】the anti shock design on both sides of the AR series PC case fans,reduce resonance and bring more silence,and be more quiet..
  • 【Comfortable Lighting Effect】The TPU light guidance ring is a perfect match with the frame of the fans,the fan is also creative in design and qualified in material..
  • 【Power Connector】The AR12 fans connect with micro 6 pin,and requires an aigo micro 6 pin controller to run.AR12 case fans controller use the latest SATA cable, connect the SATA interface on the power supply..
Check Stock