Top Micro Usb For Arduino

SunFounder Mega 2560 R3 ATmega2560-16AU Board and Ethernet Shield W5100 for Arduino

  • The mega 2560 R3 Board is 100% compatible with Arduino. Powered via the USB connection or with an external power supply. The power source is selected automatically..
  • The ATmega2560-16au has 256 KB of flash memory for storing code (of which 8 KB is used for the bootloader), 8 KB of SRAM and 4 KB of EEPROM (which can be read and written with the EEPROM library)..
  • The mega 2560 comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference, C header files).This version is optimized in the original version, both to ensure consistent and compatible with the original, but also easy to use..
  • With this Ethernet Shield, for Arduino board can be used to connect to internet. It can be used as server or client. Directly plug puzzle board, no soldering required..
  • This Ethernet Shield is directly compatible with Arduino official Ethernet Library. It adds a micro-SD card slot, which can be used to store files for serving over the network..
Check Stock

ACEIRMC ESP8266 ESP-12 ESP-12F NodeMcu Mini D1 Module for WeMos Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino,Compatible with WeMos D1 Mini 5pcs

  • This is D1 mini, it is a mini NodeMcu Lua WiFi board based on ESP-8266EX..
  • D1 Mini NodeMcu Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino, Compatible with WeMos D1 Mini..
  • 11 digital input / output pins, all pins with interrupt / PWM / I2C / support 1 line (except D0).
  • 1 analog input(3.2V max input). Micro USB....
  • WIFI development board,4M bytes.5V 1A switching power supply (switching power supply）onboard..
  • Our D1 mini development board compatible with Arduino WeMos and can be programmed in the compatible for Arduino IDE..
Check Stock

Premium USB Cable Cord for Mustek Scan Express A3 1200 Pro USB Large Format Scanner

  • Huetron 2.0 USB A Male to B Male Cable is the reliable choice for connecting devices with USB Type B Male ports such as printers, scanners, printer....
  • HIGH SPEED TRANSFER: Up to 480 Mbps transfers data speed for USB 2.0 devices, the printer cable is backwards compliant with full-speed USB 1.1 (12....
  • PREMIUM QUALITY: Corrosion-resistant connectors and foil/braid shielding make the printer scanner cable cords more long-term performance (without....
  • WIDE COMPATIBILITY: The Printer Cable is compatible with common devices with USB type B connector like Arduino, Blue, Brother, Canon, CyberPower,....
  • Verify your device has a Type-B Female port & not a standard USB, Micro-USB or Mini-USB port. This printer scanner cable is mainly used to transfer....
Check Stock

Premium USB Cable Cord for Zebra LP 2824 Plus

  • Huetron 2.0 USB A Male to B Male Cable is the reliable choice for connecting devices with USB Type B Male ports such as printers, scanners, printer switch hubs, and other legacy devices that are economical to keep as a back-up..
  • HIGH SPEED TRANSFER: Up to 480 Mbps transfers data speed for USB 2.0 devices, the printer cable is backwards compliant with full-speed USB 1.1 (12 Mbps) and low-speed USB 1.0 (1.5 Mbps)..
  • PREMIUM QUALITY: Corrosion-resistant connectors and foil/braid shielding make the printer scanner cable cords more long-term performance (without noise or signal loss)..
  • WIDE COMPATIBILITY: The Printer Cable is compatible with common devices with USB type B connector like Arduino, Blue, Brother, Canon, CyberPower, Dell, Epson, Fujitsu, HP, IOGEAR, Lexmark, M-Audio, and Samsung..
  • Verify your device has a Type-B Female port & not a standard USB, Micro-USB or Mini-USB port. This printer scanner cable is mainly used to transfer data and it cannot work as a power cable to power on the printer..
Check Stock

SparkFun Qwiic Pro Micro - USB-C (ATmega32U4) - Compatible with Arduino development board 5V/16MHz microcontroller AP2112 3.3V Voltage Regulator Castellated PTH pin pads Reset button Maximum 6V input

  • Small Compatible with Arduino board. Includes Reset button, 9x 10-bit ADC pins. 12x Digital I/Os (5 are PWM capable).
  • Improved version of the SparkFun Pro Micro. ATmega32U4 running at 5V/16MHz Supported under Arduino IDE v1.0.1+.
  • On-Board USB-C connector for programming. AP2112 3.3V Voltage Regulator. PTH Pads w/ Castellated Edges.
  • Hardware Serial Connections. Includes UART (i.e. Rx and Tx), Qwiic Connector for I2C, and SPI. Has onboard Reset Button. Input maximum of 6V. Dimensions: 1.3in x 0.7in..
  • The AtMega32U4 can have the bootloader overwritten if not used properly. There is a way to fix the bootloader if needed and instructions are available online. USB drivers may be needed to be installed on a computer to communicate with the board..
Check Stock

Treedix USB to TTL Converter CH340 Module 3.3V/5.5v Serial Converter Development Tool with Micro USB Adapter for Arduino

  • Serial Basic Breakout Board CH340G serial signal serial ic breakout development board usb micro b connector save space diy electronics projects micro b cable jumper wires.
  • Base on USB converter IC CH340G, there is a wide range of operating systems . You may need to install drivers the first time you connect the chip to your computer's USB port or when there are operating system updates..
  • The output voltage is 3.3v by default, there is a 3.3v signal, it can also be changed to 5V, changing to 5V will cause the board to output 5V and 5V signals on the VCC pin(3 .3v to 5V by a short circuit selection).
  • There are two LEDs on the board connected to TX (green) and RX (yellow) for faster viewing of serial traffic.
  • Suitable for: Arduino Pro Mini, our GPS module, cellular module and many other devices that use serial communication.
Check Stock

SparkFun RedBoard Qwiic ATMega328P compatible with Arduino board w/ Qwiic Connector and CH340C Serial-USB Converter IC Breadboardable R3 footprint microcontroller Improved reset button

  • ATmega328 microcontroller with Optiboot (UNO) Bootloader. Rev3 shield compatible..
  • Program with a USB Micro-B cable using the Arduino IDE platform: Plug in the board, select “Arduino UNO” and you’re ready to upload code.
  • Hardware peripherals you know and love: 20 Digital I/O pins with 6 PWM pins, 6 Analog Inputs, UART, SPI and external interrupts.
  • Broken out the SDA, SCL and IOREF pins, so it will be compatible with future shields Power over USB or through the barrel jack 7 to 15VDC.
  • The SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong..
Check Stock

KEYESTUDIO 48 Sensors Modules Starter Kit for Arduino with LCD, 5v Relay, IR Receiver, LED Modules, Servo Motor, Temperture, Gas Sensor, Programming for Beginners Adults Learning

  • This electronic sensor kit contains 48 pieces most popular and mainstream sensors and modules, allow you to do a lot devices, robots and other interactive device with the best price. This kit Not contains arduino controller board..
  • Compatible with various micro-controllers and Raspberry Pi, such as mega 2560, r3 development board, pro micro, leonardo, etc. Note we only offer arduino instructions..
  • We provide detailed projects for each sensor based on development board, including wiring method, test code, etc. Download the arduino tutorial from wiki website..
  • This is high quality sensor kit with exquisite packaging. It's a perfect present for junior high and high school inventors, hackers, designers, and tinkerers of all levels..
  • The tutorial shows wiring for the Arduino and gives example code. All of this makes getting started with sensors quite easy. The professional support team is ready to answer any questions..
Check Stock

ideaspark 3pcs ESP8266 NodeMCU CH340 ESP-12E WiFi Wireless Internet Development Board Serial Module with Micro USB Cable Works Great for Arduino IDE

  • ... MHz adjustable clock frequency. NodeMCU has 128 KB RAM and 4MB of Flash memory to store data and programs. Its high processing power with in-built and Deep Sleep Operating features make it ideal for IoT projects.
  • The NodeMCU Development Board can be easily programmed with Arduino IDE since it is easy to use.Works greate with Arduino/Mongoose IoT/Micropython.
  • CH340 replace CP2012 USB to UART Bridge ,provides a better performance plug and play interface solution and easier programming. Use the search engine Google.com or Bing.com earch for the keyword r "CH340 driver", it is very easy to find the driver installer.
  • Applications:Access points portals,IoT projects,Wireless data logging,Used in learning the networking fundamentals,Sockets and smart bulbs,Smart home automation systems.
Check Stock

Yahboom Microbit Halo Programmable Expansion Board Compatible with Arduino Voice Control Colorful LED RGB Lights Compatible with Micro:bit V2 (Without BBC Micro:bit)

  • The microphone is installed on the expansion board, which can realize the function of sound controlling light.For example, the bigger the decibel, the more LED lights will be on. Compatible with Micro:bit V2 & V1.5, Micro:bit NOT Include.
  • Not only can micro USB power supply be used, but also 2 AAA batteries can be used to supply power. Even playing outdoors, there's no scruple about it..
  • Micro:bit expansion board is designed with building blocks hole to match your building block suite and find more interesting games..
  • Programmable halo can be compatible with arduino, but you needs to weld the needles on the expansion board by yourself, and no needles and arduinoin are provided the packaging..
Check Stock

Premium USB Cable Cord for HP Scanjet G4050 Photo Scanner L1957A#B1H

  • Huetron 2.0 USB A Male to B Male Cable is the reliable choice for connecting devices with USB Type B Male ports such as printers, scanners, printer switch hubs, and other legacy devices that are economical to keep as a back-up..
  • HIGH SPEED TRANSFER: Up to 480 Mbps transfers data speed for USB 2.0 devices, the printer cable is backwards compliant with full-speed USB 1.1 (12 Mbps) and low-speed USB 1.0 (1.5 Mbps)..
  • PREMIUM QUALITY: Corrosion-resistant connectors and foil/braid shielding make the printer scanner cable cords more long-term performance (without noise or signal loss)..
  • WIDE COMPATIBILITY: The Printer Cable is compatible with common devices with USB type B connector like Arduino, Blue, Brother, Canon, CyberPower, Dell, Epson, Fujitsu, HP, IOGEAR, Lexmark, M-Audio, and Samsung..
  • Verify your device has a Type-B Female port & not a standard USB, Micro-USB or Mini-USB port. This printer scanner cable is mainly used to transfer data and it cannot work as a power cable to power on the printer..
Check Stock

Premium USB Cable Cord for M-Audio Pro Tools Recording Studio Fast Track Audio Interface

  • Huetron 2.0 USB A Male to B Male Cable is the reliable choice for connecting devices with USB Type B Male ports such as printers, scanners, printer switch hubs, and other legacy devices that are economical to keep as a back-up..
  • HIGH SPEED TRANSFER: Up to 480 Mbps transfers data speed for USB 2.0 devices, the printer cable is backwards compliant with full-speed USB 1.1 (12 Mbps) and low-speed USB 1.0 (1.5 Mbps)..
  • PREMIUM QUALITY: Corrosion-resistant connectors and foil/braid shielding make the printer scanner cable cords more long-term performance (without noise or signal loss)..
  • WIDE COMPATIBILITY: The Printer Cable is compatible with common devices with USB type B connector like Arduino, Blue, Brother, Canon, CyberPower, Dell, Epson, Fujitsu, HP, IOGEAR, Lexmark, M-Audio, and Samsung..
  • Verify your device has a Type-B Female port & not a standard USB, Micro-USB or Mini-USB port. This printer scanner cable is mainly used to transfer data and it cannot work as a power cable to power on the printer..
Check Stock