Top Micrometer For Hardness Measurement

Digital Caliper Measuring Tool 6 Inch Small Vernier Caliper Electronic Micrometer Machinist Woodworking Tools

  • 【Precise and accurate measurement】: Vodlbov digital caliper measuring range 0 - 6''/ 0 - 150 mm.
  • accuracy up to ±0.001"/0.02mm, resolution up to 0.0005"/0.01mm. The body of the dial caliper measuring tool is made of finely polished stainless steel with knurled thumb rollers and locking screws to ensure smooth sliding and accurate positioning when measuring..
  • 【Three-unit conversion and four measurement modes】: The unit conversion is easy to operate, and the three measurement modes of inch/fraction/mm can be quickly switched with one key.
  • you only need to use one measurement tool to measure internal, external dimensions, diameter, depth and steps..
  • 【Zero Setting Function】 Easy to set zero at any point by pressing the zero button, allows you to start a new measurement at once, ideal for differential measurements. Also zero calibration provides precise results when readouts are not accurate..
  • 【Large LCD Display】: Equipped with an easy-to-read large LCD display that displays instant readings digitally, which is more convenient than any vernier caliper or micrometer caliper.
  • Automatic shutdown after 5-8 minutes of no operation to helps you save battery power..
  • 【Wide application】: Professionals and enthusiasts can use. A great choice for me....
Check Stock

Fowler 54-220-777-1, IP54 Digital Micrometer Head with 0-1\/25mm Measuring Range

  • Micrometer Head: For general purpose measuring applications.
  • carbide-tipped measuring face with an accuracy of 0.00012″/0.003mm for precise readings.
  • Precision Measurements: This digital micrometer with a 0-1"/25mm range has a friction thimble that provides smooth and quiet performance and is suitable for one-handed operation.
  • Easy to Use: Digital micrometer head features an LCD that performs direct inch/metric conversions and has a switchable resolution of 0.00005"/0.001mm.
  • meets IP54 specifications for dust and water protection.
  • Data Output: Digital micrometer with RS-232 output that provides the ability to export readings to a computer (cable not included).
  • Set Includes: Fowler micrometer head, a spare battery, and a battery removal tool.
Check Stock

Microscope Stage Micrometer Calibration Slide (TCM-H) with 4-Scales and 0.01mm Line Resolution

  • Microscope Stage Micrometer Calibration Slide with 4-Scales and 0.01mm Line Resolution.
  • Size of a typical slide (3"x1"), works well with most microscopes.
  • Great tool for microscope measurement and calibration.
Check Stock

Starrett 949 Case only for Electronic Outside Micrometer NO.3734/734 Series

  • The Starrett 949 Deluxe Padded Case is sized to store and protect a single outside electronic micrometer that measures to 1 inch (25 mm)..
  • The case has rounded edges, is made of steel with a vinyl covering, and has fitted foam padding to house an electronic micrometer, a CR2450 battery, and adjustment wrench (sold separately)..
  • The case is an accessory for use only with a Starrett micrometer that measures 0-1” (25 mm)..
  • Fits Model Series 731, 733, 734, 3734, 756, 788, 733.1, 756.1 and 788.1 (Micrometer sold separately)..
Check Stock

Fowler 52-240-006-1 Outside Inch Micrometer with 5-6 Measuring Range

  • Micrometer: The Fowler series of outside micrometers features exceptional quality and accuracy with a ratchet thimble.
  • Accurate Readings: Micrometer has microfine 0.0001" graduations and accuracy of ±0.00025".
  • carbide-tipped anvil and spindle have 0.256" measuring....
  • Easy-to-Read Display: Distinct figures and graduations on the micrometer permit easy reading that allows for measuring with extra ease and comfort.
  • Durable Construction: Hardened, precision-ground, and carbide-tipped anvil and spindle with microfine graduations.
  • Set Includes: A Fowler micrometer with ratchet thimble, a standard, a wrench, and a fitted case.
Check Stock

Mitutoyo 137-213 Tubular Vernier Inside Micrometer, Extension Rod Type, 2-20\ Range, 0.001\ Graduation, +/-6.00052\ Accuracy, 6 pcs Extension Rods

  • Tubular micrometer measures the inside dimensions of cylinders, rings, and parallel surfaces.
  • Vernier scale in inch units for taking precise inside dimension (ID) measurements.
  • Includes interchangeable extension rods for a diversified range of measurement.
  • Slow head travel helps provide fine positioning.
  • Solid extension rods help provide durability.
Check Stock

Mitutoyo - 516-930-26 Steel Rectangular Micrometer Inspection Gage Block Set with Optical Parallel, ASME Grade 0, 0.0625 - 2.0\ Length (9 Blocks)

  • Micrometer inspection gage blocks are sized for use with a Mitutoyo Micro Checker (sold separately).
  • Grade 0 gage blocks supplied with a Mitutoyo certificate of inspection that the blocks meet American Society of Mechanical Engineers (ASME) B89.1.9.
  • High-carbon, high-chrome steel provides high hardness and wear-resistance.
  • Nominal length (in inches) indicated with laser-etched, black characters.
Check Stock

CHAMDRILLHEAD DRILLING HOLDER .748 TO .783 RANGE, .748 SHANK

  • 13PCS 2" boring head set w/ R8 shank kit includes 9pcs 1/2" boring bars, 1pc R8 handle and 3pcs hex wrenches, all packaged in a solid box for easy storage and carry..
  • 2 Inch boring head with R8 shank, these tools are made of high quality steel with great match of hardness and toughness. Hard and durable for long lasting and trouble free use..
  • Center Distance bt 2 bottom hole: 0.60"..
  • A micrometer lead screw provides 0.0001" direct reading accuracy and ease of adjusting. Perfect for milling machines..
  • Used for processing inner hole surfaces, boring, boring outer circle, boring end face, boring ladder hole, boring hole end face, cutting hole and outer ring groove, etc..
Check Stock

Push Button Safety with Pin and Spring, Steel Construction (Stainless-)

  • All the features of the Bench Rest Seater Die plus a Micrometer for adjusting bullet seating depth.
  • Micrometer allows fine-tuning in either direction.
  • Gradations at increments of .001″ are clearly marked.
  • Eliminates much of the trial and error that was once associated with seating accurate rounds.
  • Bright, white markings make micrometer easy to read.
Check Stock

Caliper Measuring Tool Digital Caliper Industrial Quality Precision Electronic Vernier Caliper Inch/Millimeter Measurement Micrometer for Jewelry - Accuracy Ip54 Waterproof Caliper Measure Tool

  • INDUSTRIAL GRADE: Different from most calipers using copper measuring sensors, our digital caliper adopts glass material sensor, which effectively prevents the accuracy of caliper effecting by temperature, humidity, magnetism, etc and greatly ensures the stability of measurement. You can easily minimize errors, save delays, and make high-precision measurements using our caliper measuring tool..
  • PRECISION AND ACCURACY: You can measure thickness, width or depth down to 0.001 inch with our caliper. This level of precision is required if anything needs to be correctly fitted and sealed. It allows you to make pieces that fit perfectly and leave no room for error. measurement accuracy: ±0.02mm/ 0.001 inch.
  • LONGER USEFUL LIFE: The housing is composed of zinc alloy and the ruler of the caliper is made of first-class thickened stainless steel,Fine polished stainless steel and new groove processing on the depthometer provide a more attractive, smoother slide and reliable results.all metal construction ensures the longer spanlife of caliper.
  • ZERO FUNCTION: Metric And Inch Conversion: Switch Free between metric and inch measurements, It can save our conversion time during the measurement process, smart design allows you to easily reset to zero by pressing the zero....
Check Stock

Digital Caliper, 6 Inch Caliper Measuring Tool Micrometer Vernier Caliper with Stainless Steel, Electronic Micrometer Calipers with Large LCD Screen, Auto-Off Feature, Inch Metric Fraction Conversion

  • PRECISE & ACCURATE: Digital micrometer have a measuring range of 0 - 6"/ 0 - 150mm.
  • accuracy ±0.001"/ 0.02mm, resolution 0.0005"/ 0.01mm. A perfect and accurate caliper measuring tool for household or DIY, convenient for your measurement works, especially as woodworking or drafting calipers..
  • 3 UNITS CONVERSION: 6 inch digital caliper can be measured by one button in unit switch, inch, millimeter and fraction based on your habits with the push of a button, easy to use. And you can also reset the data to zero through zero button when you take the second measurement..
  • STAINLESS STEEL CALIPER: The body of the caliper measuring tool is made of finely polished stainless steel, and the caliper has knurled thumb wheels and locking screws to ensure smooth slide and accurate positioning during measurement..
  • 4 MEASUREMENT MODES & AUTO OFF: This caliper measuring tool comes with two sets of jaws and a probe, which are easy to measure depth, step, external and internal diameter to meet your multiple needs. Caliper will automatically turn off within 5 mins when not running, which can extend the battery life cycle..
  • WIDE APPLICATION: This electronic precision caliper is always used for professionals and hobbyists alike, by carpenter, jewelers, hobbyists, woodworkers,....
Check Stock

Mitutoyo 137-013 Tubular Vernier Inside Micrometer, Extension Rod Type, Carbide Tipped Face, 50-63mm Range, 0.01mm Graduation, +/-0.004mm Accuracy

  • Tubular micrometer measures the inside dimensions of cylinders, rings, and parallel surfaces.
  • Vernier scale in metric units for taking precise inside dimension (ID) measurements.
  • Includes interchangeable extension rods for a diversified range of measurement.
  • Slow head travel helps provide fine positioning.
  • Carbide measuring faces help provide wear resistance.
Check Stock