Top Micrometer For Surface Finish Measurement

ARES 43011-1/4-Inch Drive Micrometer Torque Wrench - Dual Torque Scales - 40-200 in/lbs (4.52-22.6Nm) - Click Torque Wrench - Ultra Smooth Torque Dialing with High Visibility Laser Etched Markings

  • ITEM SPECIFICATIONS: The ARES 1/4-Inch Drive Micrometer Torque Wrench features dual torque scales with in/lbs and newton meters readings and ranges of 40-200 in/lbs and 4.52-22.6 Nm with an accuracy tolerance of ±3%. The ultra smooth handle rotation with high visibility laser etched markings makes it easy to adjust your specified torque. Designed with longevity in mind, all of our torque wrenches are calibrated before shipping and meet ANSI standards..
  • DESIGN CONSIDERATIONS: This click type torque wrench is designed with ultra smooth torque dialing, and the quick torque change mechanism features a spring loaded pull down knurled collar that secures the torque setting with a positive lock mechanism. The quick release mechanism helps you dial in your torque setting effortlessly and instantly. The click type design alerts you when torque is reach and helps to prevent over-torquing..
  • CONVENIENT STORAGE: This click type micrometer torque wrench comes with a high quality storage case, so you'll always have the perfect place to keep it while it's not in use, and you'll never have to search for it when you need it. This torque wrench features a black nickel finish on the shaft and ratchet, and a red anodized finish on the aluminum machine knurled handle. The ....
Check Stock

Digital Caliper, M MOOCK 0-6 inches Calipers Measuring Tool, Electronic Digital Micrometer Vernier Caliper with Stainless Steel Body, Large LCD Screen, Inch Millimeter Fractions Conversion/Green

  • 【Stainless Steel Digital Caliper】: Fine polished stainless steel frame with knurled thumb roller and new processing of depthometer's groove give better looking, smooth sliding, and accurate result..
  • 【Precision and Accurate Measurement】：With an accuracy within ±0.0005inch/0.01mm, this digital caliper has been a great helper for both professionals and home use；The digital micrometer glides smoothly and allows you to set zero and measure at any point of scale； Smooth and brushed stainless thumb roller easily and precision measurement..
  • 【Three Unit Conversion & Four Measurement Mode 】: It is easy to operation of unit conversion,one button quick change between three measuring modes inch/fractions/millimeter.
  • You can measure the internal, external dimensions, diameters, depth and steps with just one measuring tool. [Attention]：If there is a flickering screen, inaccurate reading, etc. that makes the caliper not work properly, please contact customer service and we will actively solve the problem for you..
  • 【Extra Large LCD Display】: Comes with a large easy-to-read LCD screen that shows instant readings with digital numbers, makes it so much more convenient than any vernier caliper or micrometer caliper.
Check Stock

Anytime Tools Tubular Inside Micrometer 2-12\ Internal Precision Set

  • Each set consists of an inside micrometer head and a series of extension rods.
  • Anvil and spindle are hardened and precision ground with microlap finish on ends..
  • Positive locking nut on spindle. be calibrated by a micrometer or ring gage..
Check Stock

Micrometer Calibration Rod Stainless Steel Calibration Bars Standard Measuring Rod Calibration Blocks Caliper Calibration Rod for Calipers Outside Micrometers Calibrating 100mm

  • High Quality Stainless Steel Material: Micrometer calibration rod is made of high quality stainless steel, high hardness,not easy to deform and durable..
  • Clearly Marked: Stainless steel standard rods have clear length markings so you can quickly select the size you want..
  • Small And Portable: Standard measuring rods are of reasonable size, light weight, and easy to use and carry.It is a necessary tool for measurement..
  • 4 Optional Specifications: Calibration rod is a professional measuring tool, there are 4 different specifications for you to choose from, 25mm, 50mm, 75mm, 100mm,meet your different measurment needs..
  • Main Application: Calibration stick is mainly used for calibrating micrometers.Micrometer calibration rod is more precise length measuring instruments..
Check Stock

UKCOCO 4pcs Small Hole Gauge Set Telescoping Full Round Spherical Shaped Hardened Bore Gauge

  • Used with an outside micrometer for measuring inside diameter of bores..
  • Extra long for gaging deep and shallow holes, slots and similar work pieces..
  • Gaging surface is fully hardened to insure long tool life..
  • 4 sizes of gages are supplied in a fitted case..
  • Spherical measuring faces hardened, Tool adjustment shaft Satin chrome finish.
Check Stock

Fowler 52-253-004-1, Premium Outside Inch Micrometer With 3-4\ Measuring Range

  • Micrometer Screw Gauge: With flat anvil/spindle pair for general purpose measuring.
  • microfine graduations and carbide-tipped measuring faces.
  • 0.001" graduation and ± 0.001" accuracy for precise readings.
  • Accurate Measurements: Anvil and spindle hardened and precision-ground with microlap finish on tips.
  • 0.256" diameter of measuring faces, 0.00003" flatness, and 0.00008" parallelism on 3-4" micrometers for accurate measurements.
  • Easy to Use: Quick, easy zero adjustment on the sleeve and positive lever locking clamp.
  • friction thimble with ratchet stop applies constant force for repeatability between users.
  • Satin Chrome Finish: Vernier scale with hammertone blue baked-enamel frame with heat-insulated frames.
  • the finishing on the thimble and sleeve helps reduce rust and glare, while the lapped spindle thread provides smooth movement, extending product life.
  • Set Includes: An outside micrometer with a vernier scale of 0.001.
Check Stock

Kynup Digital Caliper 8 Inch Caliper Measuring Tool with Stainless Steel IP54 Splash Proof Protection Design Easy Switch from Inch Metric Fraction Large LCD Screen 200mm

  • 【3 Units Conversion】 You can switch 3 units with the calipers: inch, mm and fraction based on your habits with the push of a button. Press the....
  • 【Precise & Accurate】 Kynup 8" caliper has a measurement range of 0 - 8''/ 0 - 200mm.
  • accuracy to ±0.001”/0.02mm and resolution to....
  • 【4 Measuring Ways】 Caliper measuring tool comes with two sets of jaws and a probe, which are easy to measure depth, step, external and internal....
  • 【Splash Proof & Stainless Steel Material】The Splash Proof micrometer is constructed of first-class STAINLESS STEEL, Splash Proof, anti-rust, which....
  • 【Wide Application & Auto Off】The 8 inch caliper micrometer is always used by professionals and hobbyists alike, by jewelers, hobbyists,....
Check Stock

50mm Caliper Calibration Rod, Stainless Steel Calibration Bar for Accurate Measuring

  • STAINLESS STEEL MATERIAL: The outside micrometer is made of premium stainless steel, so it is not easy to deform and is durable in use..
  • HIGH QUALITY: The outside micrometer standard caliper is 100% brand newbrand new and has a high quality..
  • VARIOUS SPECIFICATIONS: The outside micrometer standard caliper is a professional measuring tool, there are various specifications for your choice..
  • CONVENIENCE: The stainless steel outside micrometer calibration bar has reasonable size and light weight, which is convenient to use and carry..
  • MAIN APPLICATION: The stainless steel outside micrometer calibration bar is mainly used for calibrating micrometers..
Check Stock

Digital Caliper Measuring Tool 6 Inch Small Vernier Caliper Electronic Micrometer Machinist Woodworking Tools

  • 【Precise and accurate measurement】: Vodlbov digital caliper measuring range 0 - 6''/ 0 - 150 mm.
  • accuracy up to ±0.001"/0.02mm, resolution up to 0.0005"/0.01mm. The body of the dial caliper measuring tool is made of finely polished stainless steel with knurled thumb rollers and locking screws to ensure smooth sliding and accurate positioning when measuring..
  • 【Three-unit conversion and four measurement modes】: The unit conversion is easy to operate, and the three measurement modes of inch/fraction/mm can be quickly switched with one key.
  • you only need to use one measurement tool to measure internal, external dimensions, diameter, depth and steps..
  • 【Zero Setting Function】 Easy to set zero at any point by pressing the zero button, allows you to start a new measurement at once, ideal for differential measurements. Also zero calibration provides precise results when readouts are not accurate..
  • 【Large LCD Display】: Equipped with an easy-to-read large LCD display that displays instant readings digitally, which is more convenient than any vernier caliper or micrometer caliper.
  • Automatic shutdown after 5-8 minutes of no operation to helps you save battery power..
  • 【Wide application】: Professionals and enthusiasts can use. A great choice for me....
Check Stock

Fowler 54-220-777-1, IP54 Digital Micrometer Head with 0-1\/25mm Measuring Range

  • Micrometer Head: For general purpose measuring applications.
  • carbide-tipped measuring face with an accuracy of 0.00012″/0.003mm for precise readings.
  • Precision Measurements: This digital micrometer with a 0-1"/25mm range has a friction thimble that provides smooth and quiet performance and is suitable for one-handed operation.
  • Easy to Use: Digital micrometer head features an LCD that performs direct inch/metric conversions and has a switchable resolution of 0.00005"/0.001mm.
  • meets IP54 specifications for dust and water protection.
  • Data Output: Digital micrometer with RS-232 output that provides the ability to export readings to a computer (cable not included).
  • Set Includes: Fowler micrometer head, a spare battery, and a battery removal tool.
Check Stock

Microscope Stage Micrometer Calibration Slide (TCM-H) with 4-Scales and 0.01mm Line Resolution

  • Microscope Stage Micrometer Calibration Slide with 4-Scales and 0.01mm Line Resolution.
  • Size of a typical slide (3"x1"), works well with most microscopes.
  • Great tool for microscope measurement and calibration.
Check Stock

Starrett 949 Case only for Electronic Outside Micrometer NO.3734/734 Series

  • The Starrett 949 Deluxe Padded Case is sized to store and protect a single outside electronic micrometer that measures to 1 inch (25 mm)..
  • The case has rounded edges, is made of steel with a vinyl covering, and has fitted foam padding to house an electronic micrometer, a CR2450 battery, and adjustment wrench (sold separately)..
  • The case is an accessory for use only with a Starrett micrometer that measures 0-1” (25 mm)..
  • Fits Model Series 731, 733, 734, 3734, 756, 788, 733.1, 756.1 and 788.1 (Micrometer sold separately)..
Check Stock