Top Micrometer For Time Measurement

Kynup Digital Caliper 8 Inch Caliper Measuring Tool with Stainless Steel IP54 Splash Proof Protection Design Easy Switch from Inch Metric Fraction Large LCD Screen 200mm

  • 【3 Units Conversion】 You can switch 3 units with the calipers: inch, mm and fraction based on your habits with the push of a button. Press the....
  • 【Precise & Accurate】 Kynup 8" caliper has a measurement range of 0 - 8''/ 0 - 200mm.
  • accuracy to ±0.001”/0.02mm and resolution to....
  • 【4 Measuring Ways】 Caliper measuring tool comes with two sets of jaws and a probe, which are easy to measure depth, step, external and internal....
  • 【Splash Proof & Stainless Steel Material】The Splash Proof micrometer is constructed of first-class STAINLESS STEEL, Splash Proof, anti-rust, which....
  • 【Wide Application & Auto Off】The 8 inch caliper micrometer is always used by professionals and hobbyists alike, by jewelers, hobbyists,....
Check Stock

50mm Caliper Calibration Rod, Stainless Steel Calibration Bar for Accurate Measuring

  • STAINLESS STEEL MATERIAL: The outside micrometer is made of premium stainless steel, so it is not easy to deform and is durable in use..
  • HIGH QUALITY: The outside micrometer standard caliper is 100% brand newbrand new and has a high quality..
  • VARIOUS SPECIFICATIONS: The outside micrometer standard caliper is a professional measuring tool, there are various specifications for your choice..
  • CONVENIENCE: The stainless steel outside micrometer calibration bar has reasonable size and light weight, which is convenient to use and carry..
  • MAIN APPLICATION: The stainless steel outside micrometer calibration bar is mainly used for calibrating micrometers..
Check Stock

Digital Caliper Measuring Tool 6 Inch Small Vernier Caliper Electronic Micrometer Machinist Woodworking Tools

  • 【Precise and accurate measurement】: Vodlbov digital caliper measuring range 0 - 6''/ 0 - 150 mm.
  • accuracy up to ±0.001"/0.02mm, resolution up to 0.0005"/0.01mm. The body of the dial caliper measuring tool is made of finely polished stainless steel with knurled thumb rollers and locking screws to ensure smooth sliding and accurate positioning when measuring..
  • 【Three-unit conversion and four measurement modes】: The unit conversion is easy to operate, and the three measurement modes of inch/fraction/mm can be quickly switched with one key.
  • you only need to use one measurement tool to measure internal, external dimensions, diameter, depth and steps..
  • 【Zero Setting Function】 Easy to set zero at any point by pressing the zero button, allows you to start a new measurement at once, ideal for differential measurements. Also zero calibration provides precise results when readouts are not accurate..
  • 【Large LCD Display】: Equipped with an easy-to-read large LCD display that displays instant readings digitally, which is more convenient than any vernier caliper or micrometer caliper.
  • Automatic shutdown after 5-8 minutes of no operation to helps you save battery power..
  • 【Wide application】: Professionals and enthusiasts can use. A great choice for me....
Check Stock

Fowler 54-220-777-1, IP54 Digital Micrometer Head with 0-1\/25mm Measuring Range

  • Micrometer Head: For general purpose measuring applications.
  • carbide-tipped measuring face with an accuracy of 0.00012″/0.003mm for precise readings.
  • Precision Measurements: This digital micrometer with a 0-1"/25mm range has a friction thimble that provides smooth and quiet performance and is suitable for one-handed operation.
  • Easy to Use: Digital micrometer head features an LCD that performs direct inch/metric conversions and has a switchable resolution of 0.00005"/0.001mm.
  • meets IP54 specifications for dust and water protection.
  • Data Output: Digital micrometer with RS-232 output that provides the ability to export readings to a computer (cable not included).
  • Set Includes: Fowler micrometer head, a spare battery, and a battery removal tool.
Check Stock

Microscope Stage Micrometer Calibration Slide (TCM-H) with 4-Scales and 0.01mm Line Resolution

  • Microscope Stage Micrometer Calibration Slide with 4-Scales and 0.01mm Line Resolution.
  • Size of a typical slide (3"x1"), works well with most microscopes.
  • Great tool for microscope measurement and calibration.
Check Stock

Starrett 949 Case only for Electronic Outside Micrometer NO.3734/734 Series

  • The Starrett 949 Deluxe Padded Case is sized to store and protect a single outside electronic micrometer that measures to 1 inch (25 mm)..
  • The case has rounded edges, is made of steel with a vinyl covering, and has fitted foam padding to house an electronic micrometer, a CR2450 battery, and adjustment wrench (sold separately)..
  • The case is an accessory for use only with a Starrett micrometer that measures 0-1” (25 mm)..
  • Fits Model Series 731, 733, 734, 3734, 756, 788, 733.1, 756.1 and 788.1 (Micrometer sold separately)..
Check Stock

Michark Digital Caliper Caliper Measuring Tool Electronic Micrometer Calipers Stainless Steel Vernier Caliper with Large LCD Screen/Inch and Millimeter Conversion/Auto-Off with Case, 6 to 7.9 Inches

  • 【Precise Measurement】 Measurement range: 0 - 6" / 0 - 150mm.
  • Accuracy: ±0.03mm/0.001". The knurled thumb wheel and screws ensure smooth sliding and accurate scale positioning. stainless steel accurate digital caliper measuring tool is perfect for household or DIY measurement..
  • 【Extra Large LCD Display】The digital calipers is euiqpped with an easy-to-read 2“x0.8" LCD screen that helps you to get precise results quickly and easily. ON/OFF button is to turn on or turn off display, ZERO button helps to set the reading on display to be zero..
  • 【4 Measuring Modes】 This micrometer can be used to measure inside and outside diameter, depth and step with two sets of jaws and a probe. It comes with 3 batteries in total and it is very easy to install the battery without any tools. One battery can last about one year. Auto off after 5 minutes. When you don't use it for a long time, please tighten the screw to make the caliper fixed to avoid wasting battery power..
  • 【Inch/mm Conversion】One button switches between two units quickly -- inch and millimeter. Home DIY and professional use are both highly recommended. A portable case for this digital caliper measuring tool allows you to take it anywhere and protect it well....
Check Stock

Fowler 52-240-006-1 Outside Inch Micrometer with 5-6 Measuring Range

  • Micrometer: The Fowler series of outside micrometers features exceptional quality and accuracy with a ratchet thimble.
  • Accurate Readings: Micrometer has microfine 0.0001" graduations and accuracy of ±0.00025".
  • carbide-tipped anvil and spindle have 0.256" measuring....
  • Easy-to-Read Display: Distinct figures and graduations on the micrometer permit easy reading that allows for measuring with extra ease and comfort.
  • Durable Construction: Hardened, precision-ground, and carbide-tipped anvil and spindle with microfine graduations.
  • Set Includes: A Fowler micrometer with ratchet thimble, a standard, a wrench, and a fitted case.
Check Stock

Mitutoyo 137-213 Tubular Vernier Inside Micrometer, Extension Rod Type, 2-20\ Range, 0.001\ Graduation, +/-6.00052\ Accuracy, 6 pcs Extension Rods

  • Tubular micrometer measures the inside dimensions of cylinders, rings, and parallel surfaces.
  • Vernier scale in inch units for taking precise inside dimension (ID) measurements.
  • Includes interchangeable extension rods for a diversified range of measurement.
  • Slow head travel helps provide fine positioning.
  • Solid extension rods help provide durability.
Check Stock

Push Button Safety with Pin and Spring, Steel Construction (Stainless-)

  • All the features of the Bench Rest Seater Die plus a Micrometer for adjusting bullet seating depth.
  • Micrometer allows fine-tuning in either direction.
  • Gradations at increments of .001″ are clearly marked.
  • Eliminates much of the trial and error that was once associated with seating accurate rounds.
  • Bright, white markings make micrometer easy to read.
Check Stock

Digital Caliper, 6 Inch Caliper Measuring Tool Micrometer Vernier Caliper with Stainless Steel, Electronic Micrometer Calipers with Large LCD Screen, Auto-Off Feature, Inch Metric Fraction Conversion

  • PRECISE & ACCURATE: Digital micrometer have a measuring range of 0 - 6"/ 0 - 150mm.
  • accuracy ±0.001"/ 0.02mm, resolution 0.0005"/ 0.01mm. A perfect and accurate caliper measuring tool for household or DIY, convenient for your measurement works, especially as woodworking or drafting calipers..
  • 3 UNITS CONVERSION: 6 inch digital caliper can be measured by one button in unit switch, inch, millimeter and fraction based on your habits with the push of a button, easy to use. And you can also reset the data to zero through zero button when you take the second measurement..
  • STAINLESS STEEL CALIPER: The body of the caliper measuring tool is made of finely polished stainless steel, and the caliper has knurled thumb wheels and locking screws to ensure smooth slide and accurate positioning during measurement..
  • 4 MEASUREMENT MODES & AUTO OFF: This caliper measuring tool comes with two sets of jaws and a probe, which are easy to measure depth, step, external and internal diameter to meet your multiple needs. Caliper will automatically turn off within 5 mins when not running, which can extend the battery life cycle..
  • WIDE APPLICATION: This electronic precision caliper is always used for professionals and hobbyists alike, by carpenter, jewelers, hobbyists, woodworkers,....
Check Stock

Mitutoyo 137-013 Tubular Vernier Inside Micrometer, Extension Rod Type, Carbide Tipped Face, 50-63mm Range, 0.01mm Graduation, +/-0.004mm Accuracy

  • Tubular micrometer measures the inside dimensions of cylinders, rings, and parallel surfaces.
  • Vernier scale in metric units for taking precise inside dimension (ID) measurements.
  • Includes interchangeable extension rods for a diversified range of measurement.
  • Slow head travel helps provide fine positioning.
  • Carbide measuring faces help provide wear resistance.
Check Stock