Top Micrometer Head Metric
Fowler 54-225-456-0, IP54 Digital Depth Micrometer with 0-6\/150mm Measuring Range
- Depth Gauge: Features an automatic switch off, an LCD display, friction thimble, microlapped 4” base for repeatable and accurate readings, six interchangeable rods for providing rapid measurement of hole depths, and an electronic counter.
- Precision Measurements: Features a 0-6"/150mm range, a resolution of 0.00005"/0.001mm, and accuracy of 0.00016″/0.004mm.
- Rod Extensions: Six rods included, all with a diameter of 0.176".
- Durable Material: Features a base constructed of hardened and ground tool steel to ensure long wear and continuing accuracy.
- Set Includes: A depth micrometer with an LCD that displays in inch/metric and is water resistant to Ingress Protection 54 (IP54) standards with six extension rods and a fitted case.
Check StockLuckyHigh Precision Micrometer Holder Stand Cast Iron Base Rubber Lined Jaws Inspection Fixture
- Micrometer holder base is made of cast iron. The clamp is equipped with rubber pad to avoid damaging the instrument and protect instrument in the process of clamping..
- Rubber lines jaws are 1.5" wide, will open to 0.75" (18mm)..
- Micrometer Holder Stand fit for most inside and outside micrometers..
- Micrometer Holder Stand Jaws can rotate 50 degrees forward and 30 degrees back..
- Micrometer Holder Stand is mainly used for clamping 0-4" micrometer to provide high measurement stability..
Check Stock50mm Caliper Calibration Rod, Stainless Steel Calibration Bar for Accurate Measuring
- STAINLESS STEEL MATERIAL: The outside micrometer is made of premium stainless steel, so it is not easy to deform and is durable in use..
- HIGH QUALITY: The outside micrometer standard caliper is 100% brand newbrand new and has a high quality..
- VARIOUS SPECIFICATIONS: The outside micrometer standard caliper is a professional measuring tool, there are various specifications for your choice..
- CONVENIENCE: The stainless steel outside micrometer calibration bar has reasonable size and light weight, which is convenient to use and carry..
- MAIN APPLICATION: The stainless steel outside micrometer calibration bar is mainly used for calibrating micrometers..
Check StockMitutoyo 293-340-30 Digital Micrometer, Inch/Metric, Ratchet Stop, 0-1\ (0-25.4mm) Range, 0.00005\ (0.001mm) Resolution, +/-0.00005\ Accuracy, Meets IP65 Specifications
- Calibrated micrometer measures 0 to 1" (0 to 25mm) with 0.00005" (0.001mm) resolution and +/- 0.00005" accuracy, for taking outside diameter measurements in harsh workshop conditions.
- LCD screen displays in inches and metric units.
- Plastic components are oil-resistant and measuring faces are carbide-tipped for durability.
- Ratchet stop to help provide uniform pressure for precise, repeatable measurements.
- Ingress Protection certified IP65 for protection against dust and water.
Check StockMitutoyo 339-301 Digimatic Tubular LCD Inside Micrometer, Extension Pipe Type, 200-1000mm Range, 0.001mm Graduation, +/-0.028mm Accuracy, 5 pcs Extension Pipes
- Tubular micrometer measures the inside dimensions of cylinders, rings, and parallel surfaces.
- Digital, single-value readout LCD displays in metric units for readability.
- Statistical Process Control (SPC) output transmits results to a computer or external device through an interface cable (sold separately).
- Rated IP65 for resistance to penetration by dust and liquid up to the force of a low-pressure water jet.
- Hollow, tubular extension pipes help provide light weight with rigidity.
Check StockCDI Torque Products A Snap-On Company 1/2' Drive 30-250 Ft Lbs / 47-332 NM Dual Scale Micrometer Adjustable Metal Handle Torque Wrench Individually Serialized with Matching Certificate of Calibration
- ✔️Williams CDI Torque Products A Snap-On Company Products are Proudly made in the United States of America, City of Industry, California. Each tool comes with a Certificate of Calibration and custom molded storage case..
- ✔️CDI Torque Products A Snap-On Company - The CDI Torque Wrench A Snap-On Company is a micrometer adjustable 1/2" torque wrench with a maximum torque of 250 ft lbs. This dual-scale micrometer adjustable torque wrench from CDI Torque Products A Snap-On Company has a 1/2" Drive and an English range of 30-250 Ft Lbs and Metric range of 47-332 Nm..
- ✔️CDI Torque Products A Snap-On Company Handles are lightly knurled for a tough, non-slip grip. Dual scale, calibrated dual direction, Positive lock with spring loaded pull down lock ring. Accuracy: ± 3% clockwise ± 4% CCW of indicated value, CW, from 20% to 100% of full scale..
- ✔️CDI Torque Products A Snap-On Company Fast, accurate and easy to set, Easy-to-read laser marked scales, Most feature quick release buttons which provide good socket retention as well as easy socket removal. Meets or exceeds ASME B107.14-2004, ISO 6789 standards, Individually serialized with matching certificate of calibration traceable to N.I.S.T..
- ✔️CDI Torque Products A Snap-On Company The metal h....
Check Stock9pcs 2 Boring Head R8 Shank 1/2 Carbide Boring Bar Set Milling
- 2" Boring Head With R8 Shank.Head size: 2".Boring bar Hole: 1/2".
- Cross Hole Dia: 1/2".Maximum Offset: 5/8".Thread: 1.5"-18.Graduations: 0.001/0-50.
- A micrometer lead screw provides 0.0001" direct reading accuracy and ease of adjusting.
- Packing including:1pcs 2" Boring Head, 1pcs R8 Shank, 9pcs 1/2" Carbide Boring Bar,3pcs Allen Wrench.
Check StockHHIP 1001-0201 Indexable Tool Set, 2 Boring Head, R8 Shank, 4 Boring Bars
- Boring head features a 1-1/2"-18 threaded back so you can change shanks as needed.
- A micrometer lead screw provides 0. 001" direct reading accuracy and makes adjusting easy.
Check StockStarrett 949 Case only for Electronic Outside Micrometer NO.3734/734 Series
- The Starrett 949 Deluxe Padded Case is sized to store and protect a single outside electronic micrometer that measures to 1 inch (25 mm)..
- The case has rounded edges, is made of steel with a vinyl covering, and has fitted foam padding to house an electronic micrometer, a CR2450 battery, and adjustment wrench (sold separately)..
- The case is an accessory for use only with a Starrett micrometer that measures 0-1” (25 mm)..
- Fits Model Series 731, 733, 734, 3734, 756, 788, 733.1, 756.1 and 788.1 (Micrometer sold separately)..
Check StockM12-1.75 x 50mm Zinc-Plated 12.9 Alloy Steel Socket Head Cap Screw 50 pk.
- Price For: Each Drive Type: Hex Socket System of Measurement: Metric Dia./Thread Size: M12-1.75 Screw Style: Socket Head Cap Screw Thread Dia.: M12 Fastener Thread Type: Metric Coarse Thread Direction: Right Hand Material Grade: Class 12.9 Item: Metric Socket Head Cap Screw Vented Hole Size: Not Vented Basic Material: Steel Min. Tensile Strength: 176, 900.
- Head Height: 12mm Head Dia.: 18mm Rockwell Hardness: C39 to C44 Thread Style: Fully Threaded Screw Head Type: Cylindrical Thread Length: 50mm Screw Industry Standards: DIN 912 Drive Size: 10mm Fastener Finish: Zinc Plated Length: 50mm Country of Origin (subject to change): Multiple.
Check StockFowler 52-240-006-1 Outside Inch Micrometer with 5-6 Measuring Range
- Micrometer: The Fowler series of outside micrometers features exceptional quality and accuracy with a ratchet thimble.
- Accurate Readings: Micrometer has microfine 0.0001" graduations and accuracy of ±0.00025".
- carbide-tipped anvil and spindle have 0.256" measuring....
- Easy-to-Read Display: Distinct figures and graduations on the micrometer permit easy reading that allows for measuring with extra ease and comfort.
- Durable Construction: Hardened, precision-ground, and carbide-tipped anvil and spindle with microfine graduations.
- Set Includes: A Fowler micrometer with ratchet thimble, a standard, a wrench, and a fitted case.
Check StockVINCA DMCA-0105 Digital Outside Micrometer with Carbide Tip 0-1"/0-25mm Measuring Range 0.00005" /0.001 mm Resolution Red Black Precision Machinist Tool
- Quality digital outside micrometer with choice of measuring range and flat anvil/spindle pair for general purpose measuring.
- LCD (1.25" x 0.5") performs direct inch/metric conversions and has a switchable resolution of 0.00005"/0.001mm.
- Or using micro drum to measure without digital function.
- Featured Absolute/Relative measuring, Data hold, Tolerance setting function.
- Hard Carbide Tip measuring faces provide wear resistance.
- Ratchet thimble and fixed thimble for precise application of pressure on object.
- Laser etched graduations and satin chrome finish for super precision and no glare.
Check Stock