Top Mild Steel Fabrication

3M Silver Cut-Off Wheel - Type 1 Metal Cutting Wheel - For Angle Grinder or Cut-Off Tool - 3\ x .035\ x 3/8\ Arbor Hole - 87458

  • GREAT PERFORMANCE AND VALUE – Designed for high-performance metal cutting while helping reduce your abrasive spend.
  • DELIVERS A FAST, CONSISTENT CUT – Ceramic 3M Precision-Shaped Grain cuts exceptionally fast, helping increase productivity.
  • LONG LASTING – Exceptional durability for extended wheel life.
  • CUTS A VARIETY OF METALS – Designed to easily cut through carbon steel, stainless steel, mild steel, aerospace alloys and more.
  • USED IN MANY INDUSTRIES – Quickly cuts through metal pipes, tubes, flat sheets and more in shipbuilding, rail, and general metal fabrication.
Check Stock

3 Inches OD DIY Custom Exhaust Pipe Kit 16-Piecese Straight & 45/90 Degree & U-Bends

  • ▶️ These exhaust bend kits include enough tubing to allow you to run your own exhaust system the way you want it. Each pipe is expanded on one end....
  • ▶️ Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability.
  • ▶️ i.e. Maximizing Smoothest High Exhaust Air Flow Rate.
  • ▶️ Slip Fit Joints to Provide Easiest Fabrication.
  • ▶️ 16-Gauge Piping Walls, Inlet / Outlet Size (IN) : 3" OD.
Check Stock

TEMCo TH0370 Dimple Die Set Tool Kit 8pcs: 1/2' 3/4' 1' 1-1/4' 1-1/2' 1-3/4' 2' 2-1/2'

  • Rated For 3/16" Mild Steel. Recommended Minimum Forming Tonnage: 13..
  • Eight Dimple Dies: 1/2", 3/4", 1", 1-1/4", 1-1/2", 1-3/4", 2", 2-1/2". (Actual Hole Size).
  • This dimple die set creates flared holes most commonly used on automobile parts fabrication. Cut out holes inherently provide reduced weight of the work piece, and these dimple dies create rigidity by flaring the holes..
  • Die Material: Punch Grade Hardened Tool Steel, Black Oxide Finish..
  • This dimple die set works with a hydraulic driver and cylinder tool most commonly used with hydraulic knockout sets like our TEMCo THA043 and TH0372..
Check Stock

OCPTY Rear Bumper with D-ring & LED Lights fit for 2009-2014 for ford for F-150 (Texture Black)

  • [Fit for]:2009 2010 2011 2012 2013 2014 for ford for F-150.
  • [Heavy Duty Construction]:Rear bumper to exact tolerances from 5/32" thick mild steel sheet and 2" x 0.120" steel tubing for superior strength and durability..
  • [Package Included]:1XRear bumper ,4x18W LED light ,2x4.75T D-rings+ Mounting screws.
  • [Never Rusts]:The rear bumper has a high quality,Powder coated Black Finish and along with our advanced laser welding technology, prevents rust from occurring..
  • [Bolt-On Installation]:The OCPTY bumper is engineered to be a direct bolt-on installation for your . As a direct fit replacement, this bumper requires no additional cutting, welding, or fabrication for installation..
Check Stock

YESWELDER ER70S-6 .035-Inch on 10-Pound Spool Carbon Steel Mig Solid Welding Wire

  • ER70S-6 has the highest combination of manganese and silicon deoxidizers, permitting higher welding currents with 100% CO2 shielding gas and leaving a smoother weld bead with little to zero post-weld cleanup..
  • ER70S-6 is the most common of the copper-coated mild steel GMAW (MIG) wires for single or multiple pass welding.
  • Great for construction work, farm implement fabrication, shaft buildup, tanks, truck bodies and general shop applications with poor fit-up or rusty, oily plates..
Check Stock

Laco Markal 96820 White Valve Action Paint Marker (Pack of 12)

  • Specifically designed for use by steel galvanizers..
  • Marks that stay on during fabrication and come off completely in the tank..
Check Stock

Measuring and Marking Metals (Workshop Practice)

  • Specifically designed for use by steel galvanizers..
  • Marks that stay on during fabrication and come off completely in the tank..
Check Stock

E7018 3/32'' Welding Electrode Rods Carbon Steel Welding Electrode 5Lb for Mild or Low Alloy Steels

  • Material: The package includes 5LB E7018 3/32'' basic carbon steel electrode.
  • Standard: AWS A5.1 E7018 ISO2560-A E42 3 B 1 2 GB/T5117 E5018.
  • Advantage: The E7018 Stick welding rod is a multi-purpose electrode with excellent handling properties. 7018 Arc welding rod performs particularly well when welding mild or low alloy steels such as bridges, construction, shipbuilding and pressure vessel fabrication, to name a few. E7018 Stick electrode can also be used in construction and maintenance of a series of construction machinery such as bulldozers, agricultural or mining equipment.
  • Application：E7018 carbon steel electrode Used to weld the Marine steels (A、B、D、E、AH36、DH36、EH36）and the same grade strength low carbon steel, mechanical performance , impact value can be as high as 150J @ -30 ℃. AC & DC.
  • Service: Fox Alloy Time-proven formulation.
  • A team of experienced welding engineers ready to answer all your welding questions.
Check Stock

3'' Custom Exhaust Kit Universal Mild Steel 16PCS Tubing Mandrel Bend Pipe Straight & U-Bend (2 PACKAGES SHIPPING))

  • Specification: 16-Gauge Piping Walls, Inlet / Outlet Size (IN) : 3″ OD.
  • Easy To Use: Slip Fit Joints to Provide Easiest Fabrication.
  • Universal Kit: 4 pcs 48″ Straight Pipes, 4 pcs 90 Degree Pipes, 4 pcs 45 Degree Pipes, 4 pcs 180 Degree U-Bends.
  • Sturdy Structure: Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability, i.e. Maximizing Smoothest High Exhaust Air Flow Rate.
  • DIY Custom: These Exhaust Bend Kits Include Enough Tubing To Allow You To Run Your Own Exhaust System The Way You Want It.
Check Stock

FixtureDisplays 23.0\ x 23.0\ x 13.3\ Wire Rack for Countertop Use with 3 Open Shelves, Black 19396-2D

  • ...k can be used to hold a few layers of literature products like newspapers, magazines or books, as well as other impulse retail items such as candy, chips or other snacks. Lip is 1.25"/2" tall front and back..
  • Wire Countertop Display Rack C 23w x 23h Tabletop POP Store Fixture Stabilizing Levelers Included Mild Steel Fabrication with Black Finish (3) Open Space Wire Shelves. The black store fixture comes with levelers to stabilize the feet of the unit on any surface..
  • Use the display rack shown here to offer your products at eye level & create impulse sales in your retail facility today! This store fixture is priced to sell! SKU WCR3SBK Overall Width x Height x Depth 23.0" x 23.0" x 13.3".
  • Shelf Width x Height x Depth 22.0" x 2.0" x 13.0".
  • Color Black. Placement Style Counter / Tabletop.
  • This rack is designed to ship flat (knock down) to save on shipping, also for ease of transport. Thus shelves are removable. For users desire permanent shelf attachment, we recommend (not required) you consider use zip ties to fasten the shelves to frame - if you see you have a need to move the rack frequently within a store environment..
Check Stock

YESWELDER ER70S-6 .030-Inch on 10-Pound Spool Carbon Steel Mig Solid Welding Wire

  • [ER70S-6] It's the most common wire of the copper-coated mild steel GMAW (MIG) wires for single or multiple pass welding..
  • [Good Performance] ER70S-6 has the highest combination of manganese and silicon deoxidizers, permitting higher welding currents with 100% CO2 shielding gas and leaving a smoother weld bead with little to zero post-weld cleanup..
  • [Applications] Great for construction work, farm implement fabrication, shaft buildup, tanks, truck bodies and general shop applications with poor fit-up or rusty, oily plates..
  • [Brand-new Plate] Use new ABS materials, which are more durable and more resistant to falling than ordinary ones..
  • [Specifications] Weight: 10lbs(4.5kg)/Diameter: .030''(0.8mm).
Check Stock

Mig Welder Machine Inverter Gas Gasless RBM1500 Mig Stick Tig 4 in 1 Flux Core 220V Supports 2LB Wire Automatic Feed for Beginner

  • [Multiprocess MIG Welding]220v input with 150A output , duty cycle : 80% at 150A，gasless(flux core wire) and gas(solid wire) welding :supports 2lbs .030’’ or .040’’ wire to weld over .030’’ thickness carbon steel stainless steel/mild steel..
  • [Stick Welding] switch to “MMA” on the panel and adjust the current as needed,welding well with 3.2mm rod 7018 1/8″, 6013 and 7018 3/32″as well..
  • [Generator Supported] this welder works well with a generator,but we suggest a 5000W above generator【30A breaker suggested for 220V】.
  • [Warranty] buy this welder with confidence as Reboot offers 1-year limited warranty and free consumables guarantee,besides,you will get a local supports for any assistance.Click on the add to cart button now!.
  • [Gift for DIY] Great for maintenance and repair and metal fabrication. energy conservation and environment protection to compare with transformer welders. home use ,switching frequency is beyond audio range, which almost eliminates noise pollution.
Check Stock