Top Miller Welding Products

150 Amp MIG Gun Torch Replacement for Miller - 12 Feet Cable - Two-Pin Signal Connector

  • This MIG Welding Torch is a direct replacement for Miller M-10/M-100 and M-150 MIG guns. - Cable Length: 2 feet with 16 mm2 power conductor..
  • High-quality MIG gun, small and lightweight. Suitable for most farm, shop and home projects, light repairs , maintenance, and autobody work applications.
  • Comes with compatible with Miller/Hobart Plug and 2-PIN Signal Connector, (Please check Picture #2 for dimensions and Table in Picture #4 for a list of compatible welders).
  • 169715 gas Nozzle - 000 Series Contact Tip - 169716 Gas Diffuser.
  • List of compatible Miller and Hobart welders: SideKick, SideKick XL, Cricket XL, Millermatic 90, Millermatic Millermatic 130, Millermatic 130XP, Millermatic 135, Millermatic 140s, Millermatic 175, Millermatic180s, DVIs /211, Challenger, Challenger 172, Passport, Passport Plus, Hobart IronMan 210..
Check Stock

Mig Welding gun accessory 0.035

  • Mig Welding gun accessory kit 0.035" for Miller Millermatic M-10, M-15 and Hobart H-9,H-10 with contact tip,gas nozzle,gas diffuser.
  • Including:20pcs Contact Tips 000-068 0.035" + 2pcs gas nozzles 169-715 1/2"+ 2pcs gas diffusers 169-716.
  • Fits for Miller Millermatic M-10, M-15 and Hobart H-9,H-10.
  • Amazon satisfied customer service & fast ship.
Check Stock

WeldingCity 100-amp 10-ft Air-cooled MIG Welding Gun Torch Stinger Replacement for Miller Millermatic MIGmatic M-Series M-100/M-10 (248282)

  • Premium quality 100-amp/150-amp/250-amp with 10-ft, 12-ft and 15-ft cable air cooled MIG welding gun, ideal replacement for Miller MIGmatic M-series. Control cable is with 2-pin Amphenol type terminal..
  • M-series MIG gun M-100/M-150/M-25/M-40 can be found in many Miller machines like Millermatic, DVI, Passport, Challenger, Pulser, Vintage or Hobart IronMan, etc. See all listed pictures for details of front consumables, rear plug and control cable type. CHECK YOUR WELDER MANUAL FOR MATCHING..
  • Referenced part number from Miller: 248282 (M-100/10-ft).
  • Front consumables come with 000068 (0.035") contact tip, 169715 (M-100/M-150) and 200258 (M-25) nozzle, 169716 (M-100/M-150) and 169728 (M-25) gas diffuser, 169729 (M-25) nozzle adapter and 194011 wire liner. Current rating: 100A, 150A and 250A.
  • Cable length: 10-ft, 12-ft and 15-ft. Control cable terminal: 2-pin Amphenol type..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

IHAYNER 15FT 150A MIG Welding Gun Torch Stinger Replacement for Miller M15 M-150 M-15 M150 Millermatic 35/120 / 130 / 130XP / 135 / 140s / 150/175 / 180s / 185 / DVIs / 211 MIG Gun and Cable

  • [Fitment] Premium quality 150Amp M-150 (M-15) replacement MIG gun, 15-foot (5m) cable, fully compatible with Miller M-150 MIG Gun 249040.
  • [Compatibility] Usually M-150 (M-15) MIG gun can be used for Miller SideKick XL/Cricket XL/Millermatic90, Millermatic 35/120/130/130XP/135/140s/150/175/180s/185/DVIs /211, Challenger, Challenger 172, Pulser or Hobart IronMan 210.
  • Use Miller M-series MIG Gun consumables. Ready to feed .030-.035 diameter welding wire.
  • [Wide Applications] Small, lightweight gun that is great for most small projects for home, farm, shop, and light autobody work.
  • [Highlight]One-piece design is especially resistant to high heat and spatter, which will lead to a long life. Lightweight and balanced curved handle provides a comfortable grip and reduces fatigue. Gun tube has an electrically insulated metal jacket, which optimizes fine wire welding performance. Cable has a strong abrasion-resistant, extruded rubber jacket which ensures long life of the cable.
Check Stock

WeldingCity 3-pk Dinse-Type Twist-Lock Insulated Connector Pair (Male/Female) for Welding Cable AWG #2-1/0 (35-50mm) | Pack of 3 Pairs

  • 4 pairs of premium Dinse-type cable connector pair (male/female) for use with welding cable connection in welders from Lincoln, Miller, ESAB, etc..
  • Male connector is with Dinse-type pin of .355" diameter (25-mm small) and pi of 1/2" diameter (35-50mm, 50-70mm and 70-95mm)..
  • Compatible with Dinse-type twistlock connectors in mainstream welders ( Miller, Lincoln, ESAB, etc.). Available connector sizes 16-25mm (small 0.355" pin, #4-#3), 35-50mm (1/2" pin, #2-1/0), 50-70mm (1/2" pin, 2/0-3/0) and 70-95mm (1/2" pin, 3/0-4/0)..
  • All connectors/adapters are equipped with heat and oil resistant covers as well as cable connection screws and copper splice caps. 3-pair per package..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

Bestarc Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Argon Gas Welding AGR-2

  • Argon / CO2 regulator and flow meter, suitable for most argon tanks, argon hose for Miller, Lincoln, Hobart, HTP, and most other welders.
  • The material of body is quality brass. Sturdy and durable.
  • Easy to use, gas regulator can be directly screwed into argon or argon / CO2 tank, ideal choice for MIG TIG welding, chemical and electronics industry.
  • Accurate to read, pressure gauge reads from 0 - 3500 PSI, and the square flow tube reads from 0-25 CFH.
  • We provide high quality products at fair price, one year warranty, professional after-sales service.
Check Stock

PreAsion Aluminum Spool Gun Fit Miller 180/300371 Spoolmate 100 Series Millermatic 140 180 211 with 10pcs Contact Tips Welding Torch Welding Machine with 9.8ft Cable DC24V for Professional

  • Spoolmate 100 does not work with the Millermatic Passport, only the Passport Plus [Parameter]： Type：air cooled.
  • Feed diameter welding wire: 0.024~0.039inch.
  • [Feature]: Equipped with four aviation plugs and 10pcs 0.03inch conductive nozzles(Contact Tip).
  • The gun head is made of plastic material,with16ft cables are 20 square.
  • Strong and sturdy filament shell, dustproof.
  • [Use place]: Aluminum Fabrication ,Trailer Fabrication, Sign Manufacturing, Auto and Marine Repair ,and high altitude operation will be used..
  • [Application]: Welding Torches Suit For CO2 Mig Welding Machine，Miller 300371 Millermatic 180 211 Spoolmate 100/ welding machine(please see welder interface on website）.
  • ✍ Please note that applicable to Spoolmate 100 Series. Spoolmate 100 Series :Millermatic 180 211.
  • Fit In order that you can use it directly after purchase and save your time, please compare the interface size of our welding torch with that of your original welding torch before purchase..
Check Stock

RX WELD 25PCS TIG Stubby Gas Lens 17GL332 3/32' & #12 Pyrex Cup & TIG Gas Lens Alumina Nozzle Kit Fit DB SR WP 17 18 26 TIG Welding Torch

  • This kit fits all 17 & 26 series air cooled torches and 18 series water cooled torches, including the Lincoln PTA-17, PTA-18 and PTA-26 torches, Miller Diamondback DB17,DB18 and DB 26 torches, along with the Weld craft WP-17, WP-18 and WP-26 torches..
  • 2pcs 3/32" 10N24S TIG Collet and 2pcs 3/32" 17GL332 Stubby Gas Lens.
  • With excellent plasticity, toughness and crack resistance, especially low temperature impact toughness higher. Uses: for a variety of locations of the pipeline TIG welding arc welding and arc welding, can be satisfied with the welding joints. Can be welded carbon steel and some low alloy steel..
  • 4pcs #12 Pyrex Glass Cup 16mm and 10pcs Temperature Resistant O-rings.
  • 2pcs Cup Gasket and 3pcs Back Cup for Tig Welding Torch.
Check Stock

Miady 25ft 50AMP Welder Extension Cord, 8 Gauge Heavy Duty Industrial NEMA 6-50 Welding Machine Cord with Lighted End, ETL Approved

  • 【PROFESSIONAL WELDER EXTENSION CORD】: Rated at 40A, 250V, 25 feet, features excellent abrasion, oil and moisture resistance and flexibility fits to extend the welding machine. Does NOT fit standard household outlets..
  • 【HEAVY DUTY】: STW jacket and 8 AWG (American wire gauge) x 3C all-copper wires with 6-50 NEMA plug and connector perfect for heavy-duty performance.
  • 【SAFETY IN MIND】: The clear lighted end receptacles provide a power indicator, which shows power is on and cord is ready to use, for you provide optimum performance and added safety..
  • 【LONG ENOUGH】: The 25 feet heavy duty welder machine cord provides length enough, allows you to move your welder around the shop and close to your welding work piece for added convenience..
  • 【GREAT COMPATIBLE】: Ideal for heavy duty industrial use and compatible with most welders on market, such as: Miller Millermatic welders, Lincoln Power MIG series welders, Hobart Handler, Ironman and Betamig welders, Century welders etc. - We provide 24*7 friendly customer support and also back our products for 18 months. Please feel free to contact us..
Check Stock

SSC Controls C810-1425 TIG Foot Pedal Miller 14-Pin Plug Made in USA 25-ft Cable Replaces RFCS-14 043554 194744 Amperage Control

  • TIG welding foot pedal with steel case and professional-grade quality..
  • 14-pin plug and 25-ft cable for Miller and Hobart TIG welders..
  • Replaces Miller RFCS-14, 043554, RFCS-14 HD, 194744 weld foot control pedals..
  • Press to activate gas contactor and increase amperage.
  • release to turn off and activate afterflow..
  • Made in USA by SSC Controls Company. Certified to CSA and UL standards..
Check Stock

Mig Welding Contact Tips 186-419 .030 for Miller Welder Gun Spoolmate 100 200 3035 185 and Hobart Spoolgun DP-3035 SpoolRunner 100,Handler 125 125 Ez 130 140 190 210MVP etc

  • 30pk premium quality mig welding contact tips .030" 186419 for Miller Spoolmate and Hobart spoolguns.
  • Compatible with Miller Welder Gun Spoolmate 100, 200, 3035, 185.
  • Compatible with Hobart spoolguns DP-3035,SpoolRunner 100,Handler 125, 125 Ez, 130, 140, 190, 210MVP, TREK 180 ,Hobart Beta-MIG 1800 and 2510,Auto Arc....
  • Package including: 30pcs contact tip 186419 .030".
  • Amazon satisfied customer service & fast ship.
Check Stock

MULMART 15 FT H100S2-10 (245924) H-10 MIG Welding Gun 100Amp Welding Torch Stinger Replacement for Hobart Handler 130XL, 135, 140, 175, 187 and AutoArc XLT142 & XLT182

  • 【Fitment】Premium Quality 15-foot (4.6M)100AMP MIG Welding Gun Replacement fits for Hobart H-10.
  • 【Compatibility】Ideal replacement for Hobart H-10 (195957), or the Hobart H100S2-10 MIG gun (245924).
  • Usually H-10 Hobart MIG gun can be found on Hobart Handler 130XL, 135, 140, 175, 187 and AutoArc XLT142 & XLT182 direct-connect cable.
  • 【Specification】Model: H100S2-10 for Hobart 100L.
  • (Use Miller M-series MIG Gun consumables. Ready to feed ) Welding Wire Diameter: 0.8~0.9mm (0.03"~0.035" Diameter Welding Wire).
  • 【Feature】One-piece modular trigger assembly-Molded out of high heat resistant material to withstand head and spatter and ensure long life. Gun tube design-Armored with an electrically insulated metal jacket optimizing fine wire welding performance. Abrasion-resistant,extruded rubber jacket-Adds strength and long life to the cable. Classic curved handle-Lightweight and balanced, providing a comfortable grip to reduce fatigue.
Check Stock