Top Milling Centre

Blossoms & Steel (Seaside Pointe Book 1)

  • The milling cutter disk has the advantages of cutting labor and can mill the step surface. During milling, the stress points are along the direction of rotation of the milling cutter, and the downward force is small, and the product is not easy to deform when milling thin strip products..
  • Hardening and hardening High-precision shock resistance, good permeability, resistance to multiple impacts, good low-temperature impact toughness, sturdiness and durability, which can increase the service life and shock resistance of the cutter head..
  • The all-steel cutter body of the steel milling cutter is your savior for the main shaft, allowing you to reduce the load on the processing of the load..
  • Strict wire jointing, strong compression force, screw offset tightening design, so that the blade position groove and the blade closely fit together, the rigidity is enhanced, and the processing effect is good..
  • High-hardness treatment Strong and durable, the surface of the cutter head is treated with a new thin coating treatment liquid for high-hardness treatment, and has good acid resistance..
Check Stock

ACTOOLS Lathe Milling Vertical Slide & 50 mm Self Centering Vise Vice-Engineering Tools

  • Lathe Vertical Milling Slide T-Slotted Caste Iron Bed of 125 mm X 100 mm in milling slide.
  • Vertical milling slide movement is approx 80 mm. Has 3 T- Slots on Table 10 mm Wide at the top of the T is 15 mm wide at the bottom of the Tee allows milling on your lathe machine.
  • Hardened Jaws with Horizontal / vertical Vee.
  • Maximum Jaw Opening 55 mm, Jaw Depth 28 mm.
  • Supplied with a 50 mm Caste Iron Self Centering Vice.
Check Stock

LGXEnzhuo Manually Operated HDPE Butt Fusion Welding Machine 4 Clamps Pipe Fusion Welder Manual PE PP PB PVDF Pipe Hot Melt Machine 110V 63-160mm

  • ... 【PARAMETER】Model No.:2.48"-6.30" (63-160mm) 4 clamps.
  • Welding level(Φ, mm)outer dia: 2.48" (63mm), 2.95" (75mm), 3.54" (90mm), 4.33" (110mm), 4.92" (125mm), 5.51" (140mm), 6.30" (160mm).
  • 【FEATURES】Features of manual hot melt butt welding machine: It consists of four parts: frame, milling cutter, independent heating plate, milling cutter and heating plate bracket.
  • 【HIGH QUALITY】The heating plate adopts an independent temperature control system and is coated with PTFE.
  • The main part of the frame is made of aluminum alloy material, which is simple in structure, compact and easy to use.
  • 【EASY TO USE】Electric milling method is adopted, with single and double-sided milling functions.
  • the milling inserts are made of high-quality tool steel, double-edged design, and can be used on both sides.
Check Stock

Milling Cutter, Dovetail Groove Carbide Cemented Straight Shank 6 Flute Dovetail Cutter End Mill Slot Milling Cutter

  • High quality: The milling cutter is made of cemented carbide with high hardness and good wear resistance..
  • Unique design: The effective cutting edge of the milling cutter is 6, and the compact and practical design makes its work more stable..
  • No burr: The main body of the milling cutter is integrally formed, the surface is smooth and burr-free, and the manufacturing size is accurate..
  • Easy to use: the installation of the milling cutter is very convenient and easy..
Check Stock

Ancable 1M Large 8 Pin Din Male-Male Speaker Audio Cable Wire for Bang & Olufsen B&O BeoLab PowerLink MK2, Peavey Sanpera Pedal and Monster Clarity HD Model One

  • Fully wired DIN 8 PIN cable, good quality, heavy duty, length 1m.
  • This cable could be used to connect the Sanpera II Footswitch to Peavy Vypyr 2 Amp.
  • This cable could be used as the speaker cable on Monster Clarity HD Model One.
  • This Powerlink mk 2 cable allows you to connect Beolab active loudspeakers with or without displays to your Bang and Olufsen hifi system or television surround sound,it fits almost all B&O audio systems and TVs manufactured since 1990.Compatible with:Beolab 1 Beolab 2 Subwoofer Beolab 3 Beolab 4 Beolab 5 Beolab 7.1 Centre Speaker Beolab 7.2 Centre Speaker Beolab 7.4 Centre Speaker Beolab 7.6.
  • Centre Speaker Beolab 9 Beolab 10 Centre Speaker Beolab 11 Subwoofer Beolab 2500 Beolab 3000 (including display) Beolab 4000 Beolab 4500 (including display) Beolab 5000 (including display) Beolab 6000 Beolab 6002 Beolab 8000 Beolab 8002 Beolab Penta mk.2/mk.3 (including display) Also for Beolink MCL2P link room box and for Beolink Passive link room box.
Check Stock

GBJ Face milling Holder 50mm/1.96\ CNC Face Mill End Milling Shell Cutter with APMT1604PDER -DP Shank Face Mill Arbor BAP400R 50-22-4T (BAP400R 50-22-4T+APMT1604PDER Yellow)

  • ☞About the 400R 50-22-4T Milling holder: 40Cr MnTi ,50mm/1.96" height and face diameter. Interface diameter: 22mm/0.86". Through heated and quenched, solid hard with good cushioning effect, Screw down insert..
  • ☞About the APMT1604 inserts: carbide inserts with CVD coating , Machining steel parts and iron ,PMKSH,For shoulder milling, face milling and slotting，HRC15°-55°.
  • ☞ Advantage：High vibration-absorbing performance, improve the surface finish of the workpiece, Great for shoulder milling, face milling and slotting.
  • ☞Material : Made from alloy steel hardened to HRC 52-56 ，90° Cutting angle ,Screw down insert.
  • ☞Package: 1x BAP 400R 50-22-4T Indexable End Mill with wrench + 10pcs APMT1604PDER BP010 carbide inserts.
Check Stock

ADINTERNATIONAL HV6-4 Slots Rotary Table With Steel Dividing Plates Set with Operation Manual Precision Quality Rotary Table Milling Vice Vise Machine Tools

  • Rotary Table Diameter :150 mm (6") Overall Height : 80 mm ( 3-1/4") Centre Height in Vertical Position: 105 mm.
  • Centre Bore of the Table: 2 MT 2 Oiling Points for a direct lubrication of the Table for longer life & better performance. Can be clamped in....
  • More Information about the Dividing Plate :- Set of 3 dividing plates designed to fit our HV4 & HV6 Rotary Tables. Centre Hole of the Plate is 21 mm....
  • A set of Steel Dividing Plates for Indexing with all required Accessories..
Check Stock

GBJ 90 ° Indexable End Mill Holder BAP400R C24-25-200 APMT1604PDER Carbide Inserts Machining Steel,Iron Square Shoulder Face milling Slotting Milling Arbor (400R C25-25-150-2T+APMT1604PDER-DP Gold)

  • ☞About the APMT1604 inserts: carbide inserts with CVD coating , Machining steel parts and iron ,PMKSH,For shoulder milling, face milling and slotting，HRC15°-55°.
  • ☞About the 400R C24-25-200 -2T (0.98" Shank) Milling holder: 40Cr MnTi ,0.98" shank diameter , 0.98" cutting diameter, 7.87" overall length. Through heated and quenched, solid hard with good cushioning effect, Screw down insert..
  • ☞Material : Made from alloy steel hardened to HRC 52-56 ，90° Cutting angle ,Screw down insert.
  • ☞ Advantage：High vibration-absorbing performance, improve the surface finish of the workpiece, Great for shoulder milling, face milling and slotting.
  • ☞Package: 1x 400R C24-25-200-2T Indexable End Mill with wrench + 10pcs APMT1604PDER ZM1135 colorful hardened carbide inserts.
Check Stock

Milling on the Drill Press (DVD, 4 Hours)

  • 【Much More Powerful】The motor power of RCOG-25V milling drilling machine has a 1100W brushless spindle drive motor providing tremendous torque and variable speeds from 50-22250 RPM continuously, with overload and overheating protection fuction.The noise of this motor is very low and it is very easy to maintain.So much power will make your work much more efficient..
  • 【Parameters】Metric Scale MT3 Milling Machine adopts high precision grinding all steel spindle with excellent strength grinding gear,X axis:18.9",Y axis:6.9",Z axis:11",it has own DRO for 3 axis.Headstock swivels 360 degrees.Max drilling diameter:0.9",Max Face screening capacity:2.5",Max vertical milling capacity:0.79",Distance from spindle to table:13.8",Spindle taper:MT3,Table size:27.5"x7.1".The speed display shows inch..
  • 【Micro-Feed Precision】Benchtop Milling Drilling Machine has a micro-feed function,the accuracy is up to 0.01'', only need to tighten the middle nut of the right hand wheel to achieve the micro-feed function, loosen the nut to achieve the manual up and down movement function.Integrated cross worktable,width is widened,with high pr....
Check Stock

1 Piece of 22mm R8 Shank Milling Cutter Shank, Horizontal Milling Cutter Arbor 22MM R8 Shank Milling Machine Spindle Suitable for Milling Machine Bridge Mouths Gear Milling Cutter Holder

  • Suitable for cutting machine/saw diameter: 22mm..
  • High hardness, determine the maximum use..
  • R8 shank short milling cutter holder, used for 22mm gear milling cutter/face milling cutter/longitudinal saw..
  • Features: Made of alloy spring steel and alloy forged steel, with long service life..
Check Stock

HSS 12mm x 45 Degree Dovetail Cutter Milling End Mill High Speed Steel

  • Durable and Sturdy: This Dovetail Milling Cutter is made of high speed steel, so it is wear-resistant, durable, tough, and you can use it for a long time..
  • Uniform Angle Distribution: This Dovetail Milling Cutter featuring uniform angle distribution and double-edged design has more excellent cutting performance..
  • Wide Application:This milling cutter with fine workmanship and high quality is suitable for mold steel, alloy steel, carbon steel, tool steel, cast iron and more..
  • Meet Your Needs: Available in 45 and 60 degree, 8 and 10 flute, and 12mm,14mm,16mm,18mm, 20mm, and 25mm diameter, this Dovetail Milling Cutter can meet your needs..
  • Satisfaction Guarantee: We strive to bring the product to our customers. If you are not satisfied, please let us know, and we'll do our to make it right.
Check Stock

GBJ Face Mill Milling Holder End Mill Milling Shell Cutter with 10pcs APMT1604PDER R0.8 with BT40 FMB22-45L Shank Face Mill Arbor BAP400R 50-22-4T 50mm/1.96\ (Milling Cutter+10 Inserts+Arbor)

  • ☞About the 400R 50-22-4T Milling holder: 40Cr MnTi ,50mm/1.96" height and face diameter. Interface diameter: 22mm/0.86". Through heated and quenched, solid hard with good cushioning effect, Screw down insert..
  • ☞About the APMT1604 inserts: carbide inserts with CVD coating , Machining steel parts and iron ,PMKSH,For shoulder milling, face milling and slotting，HRC15°-55°.
  • ☞ Advantage：High vibration-absorbing performance, improve the surface finish of the workpiece, Great for shoulder milling, face milling and slotting.
  • ☞Material : Made from alloy steel hardened to HRC 52-56 ，90° Cutting angle ,Screw down insert.
  • ☞Package: 1x BT40-FMB22-45L +1× BAP 400R 50-22-4T Indexable End Mill with wrench + 10pcs APMT1604PDER BP010 carbide inserts.
Check Stock