Top Milling Chucks

New Replacement After Market V-Belt 1343756 1343782 Delta Drill Press 11-990 K 32.5

  • LIFETIME ASSURANCE : All our accessories for sanders, planers, sharpeners, band saws, compressors, drills, including bearings, guide bearings, thrust bearings, drill chucks, drive belts, arbors and band saw tires are backed by top-notch service and EVERLASTING commitment..
  • MADE IN THE USA : Every single drill chuck and arbor is EXCLUSIVELY designed and produced in the USA in line with the highest quality standards. Choose our smooth bearing replacement for dependable performance..
  • WIDE COMPATIBILITY : DNLK drill chucks and arbors are compatible with most brands. Order our heavy duty drill chucks and profit from reduced downtime and maintenance..
  • SUPREME DURABILITY, WEAR RESISTANCE : In addition to a tight fit and flawless operation, our drill chucks and arbors have been tested and have proven to withstand high shocks and heavy-duty loads in both cold and hot environments..
  • DNLK drill chuck will fit Delta Model 11-990 Type 1.
Check Stock

Chuck handtite keyless 1/2-Inch carded

  • For those that prefer traditional keyed drill chucks, these chucks offer precision and nearly unlimited mechanical advantage for tightening and loosening drill bits and tooling. These 1/32" - 5/8" JT33 Taper drill chucks have knurled grips and the chuck key is included..
  • Arbor hole tapers from .80 inches at the opening (bottom of chuck) to .78 inches 1/2" down into the arbor hole. This gives a good fit profile for getting the correct chuck for your drill press.
Check Stock

Dynarex Disposable Underpad, 17 inches X 24 inches, 100 Count

  • FOR MEDICAL AND HOMECARE USE: The Dynarex Underpads are disposable bed pads for use during medical procedures and care for adult incontinence. These waterproof bed pads, sometimes called chux or chucks, protect sheets, mattresses, and furniture.
  • HIGHLY ABSORBENT AND PREVENTS LEAKAGE: Our disposable bed pads for incontinence are filled with highly absorbent, soft fill. These underpads are sealed on four sides with polymer to provide ultimate absorption and prevent accidental leaks.
  • NON-SKID AND WATERPROOF: The waterproof construction and non-skid blue backing of these chucks pads disposable assure that the pad stays in place and its underside stays dry. These are ideal bed pads disposable for a wide range of applications.
  • MULTIPLE APPLICATIONS: Dynarex Underpads or chucks pads are suitable not only for homecare and medical operations but also for your pets. Our disposable chucks pads for adults and pets secure for you a clean and protected floor or furniture.
  • IDEAL PACKAGING: Each box contains 100 disposable incontinence bed pads, 17” x 24” (22g), for convenient hospital, clinic, and homecare supply. Dynarex provides Best in Class alternative to other leading brands.
Check Stock

GODESON Air Chuck Locking Air Chuck use for Tire Inflator Nozzles Pack of Clip-on and Twist-on Chucks Pack of 2pcs

  • 1. HEAVY DUTY BRASS CONSTRUCTION of tire chucks with lock on make the tire air chucks durable and Reliable..
  • 2. INTERCHANGEBALE AIR CHUCKS- including Clip-on chuck and Twist-on chuck(thread on) in 1 package. You just choose it for different using. Clip- on....
  • 3. SMART DESIGN with Large Bore of tire air chuck, Open flow through for heavy duty air chuck, while close flow through for clip-on chuck.
  • 4. UNIVERSAL CONNECT TYPE ,1/4-Inch Female NPT, 3/4-Inch Hex Air Chucks, Fits Standard 1/4" NPT Fittings.
  • Quick connect tire inflator chuck, Designed to use with Inflator and pressure gauge. LIFETIME 100% Satisfaction....
Check Stock

Milling Cutter, 3.175x2x17mm Straight Shank Engraving Good Durability Spiral Milling Cutter Tungsten Steel Milling Cutter Milling Cutter Single for Repair Tool

  • Made of tungsten steel material, with high hardness and strength, wear resistance and corrosion resistance..
  • The milling cutter is a single‑flute spiral milling cutter with fast processing speed and good chip removal effect..
  • The blade adopts mirror grinding technology, the appearance is not rough, and the milling is glossy..
  • The milling cutter is mainly used for plane milling, notch milling, step face milling and profiling milling..
  • The kit contains 5 spiral milling cutters, with standard size, often used in CNC engraving machine..
Check Stock

Wood Lathe Drill Chuck Fits - Jet 1440Vs Wood Lathe - 3/4 Inch Heavy Duty Drill Chuck - Replacement Drill Chuck - Made in the USA

  • LIFETIME ASSURANCE : All our accessories for sanders, planers, sharpeners, band saws, compressors, drills, including bearings, guide bearings, thrust bearings, drill chucks, drive belts, arbors and band saw tires are backed by top-notch service and EVERLASTING commitment..
  • MADE IN THE USA : Every single drill chuck and arbor is EXCLUSIVELY designed and produced in the USA in line with the highest quality standards. Choose our smooth bearing replacement for dependable performance..
  • WIDE COMPATIBILITY : DNLK drill chucks and arbors are compatible with most brands. Order our heavy duty drill chucks and profit from reduced downtime and maintenance..
  • SUPREME DURABILITY, WEAR RESISTANCE : In addition to a tight fit and flawless operation, our drill chucks and arbors have been tested and have proven to withstand high shocks and heavy-duty loads in both cold and hot environments..
  • DNLK drill chuck will fit Jet 1440Vs Wood Lathe.
Check Stock

Metal Lathe Drill Chuck Fits - Grizzly G8688 Metal Lathe - 1/2 Inch Heavy Duty Drill Chuck - Replacement Drill Chuck - Made in the USA

  • LIFETIME ASSURANCE : All our accessories for sanders, planers, sharpeners, band saws, compressors, drills, including bearings, guide bearings, thrust bearings, drill chucks, drive belts, arbors and band saw tires are backed by top-notch service and EVERLASTING commitment..
  • MADE IN THE USA : Every single drill chuck and arbor is EXCLUSIVELY designed and produced in the USA in line with the highest quality standards. Choose our smooth bearing replacement for dependable performance..
  • WIDE COMPATIBILITY : DNLK drill chucks and arbors are compatible with most brands. Order our heavy duty drill chucks and profit from reduced downtime and maintenance..
  • SUPREME DURABILITY, WEAR RESISTANCE : In addition to a tight fit and flawless operation, our drill chucks and arbors have been tested and have proven to withstand high shocks and heavy-duty loads in both cold and hot environments..
  • DNLK drill chuck will fit Grizzly G8688 Metal Lathe.
Check Stock

Ladieshow MT2-FMB22 Face Mill Holder + 400R-50-22 CNC Lather End Milling Cutter + 10pcs APMT1604 Carbide

  • Sturdy and Durable: The end mill set is made of carbide material, with high hardness, high strength, not easy to deform and damage, good impact resistance and long service life.
  • High-Precision Machining: The milling cutter kit adopts high-precision machining technology, and the surface adopts new coating technology, which has good oxidation resistance and high temperature resistance.
  • Machining Range: Face CNC milling cutters are suitable for precision machining, roughing, flat and step machining and are the ideal toolkit for heavy duty CNC milling.
  • High Speed: Face end mills have better cleanliness and more stable accuracy, and the rotation and milling feed rates are 3 times faster than ordinary milling cutters.
  • Widely Used: Face milling cutter is a common main accessory for milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
Check Stock

SUNJOYCO Drill Chuck for Impact Driver, 1/4\ Hex Shank Power Drill Chuck Adapter Drill Converter Adapter (0.3-6.5mm,0.3-6.5mm, 2pcs)

  • SPECIFICATION: 2 pieces 3 jaw drill chucks with 1/4" hex shank (0.3-6.5mm,0.3-6.5mm).
  • QUICK CHANGE DRILL CHUCKS: The drill chucks converter could easily concert from fastening to drilling with a 1/4-inch hex shank, allowing you to quickly change tools with one hand..
  • BENEFITS: SUNJOYCO drill chucks for impact drivers eliminate the need for carrying two separate drills during lighter drilling jobs, and allow the use of straight shank and standard drill bits. These handy accessories are easily stored in any toolbox or tool bag..
  • APPLICATIONS: The SUNJOYCO power drill chuck is ideal for starting screw holes in hard-to-reach spaces, and good for light-duty accessories including drill bits, sanding drums, polishing wheels, wire & bristle brushes, and cut-off wheels..
  • WARRANTY: We provide a 2-year warranty policy for these diamond grinding wheels. Buy with confidence. If you have any concerns or questions about our cement grinding wheel, please feel free to contact us..
Check Stock

ASZLBYM 11pcs RPMT10T3 MOE R5 Indexable Carbide Milling Inserts Blade Milling Cutter with 5/8\/16mm SRDPN1616H10 Indexable Carbide Milling Tool Holder Metal Lathe Cutting Tools

  • PACKAGE INCLUDES : You will receive 1pc SRDPN1616H10 5/8”/16mm shank diameter carbide lathe milling tool holder , 11pcs RPMT10T3 MOE indexable carbide milling inserts cutters and 1pc T15 wrench..
  • Material : The SRDPN1616H10 5/8" lathe milling tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The RPMT10T3 MOE indexable milling inserts cutter material is carbide, and the coating is CVD Al2O3 TICN, It has good toughness, wear resistance and high temperature resistance, the milling insert can be used for milling cast iron, steel parts and stainless steel..
  • Milling tool holder cutter size : Shank Diameter ( length×width ) : 5/8"*5/8"(16mm*16mm).
  • RPMT10T3 MOE carbide milling insert size : Insert Style : RPMT , thickness: 0.156" ≈ 3.97mm , diameter : 0.393≈ 10mm, P=11° degree..
  • Easy to store: the milling tool holder and carbide milling inserts are packed in a plastic container, safe and easy to store, please rest assured to buy!.
Check Stock

BAP400R-50-22-4T Milling Cutter NT40-FMB22 Collet Chuck Holder Indexable End Mill APMT1604 Carbide Inserts for Milling Machines (#1)

  • Adopted New Coating Technology: New coating technology is adopted on the surface, which has good oxidation resistance and high temperature resistance, it can be used for a long time.
  • BAP400R Right-angle Milling Cutter: BAP400R right-angle milling cutter reduces blade wear and saves processing costs.
  • Fast Milling: Fast milling, screw off-position fastening designed, make the Milling Inserts and cutter fit tightly.
  • High Working Performance: This is a high precision Milling Cutter , strong rigidity, good processing effect.
  • High Hardness: The milling cutter is made of high quality material, high hardness with good impact resistance.
Check Stock

HQRP On-Off Toggle Switch compatible with Delta 489105-00 11-900 11-950 11-980 11-985 11-990 14-040 17-900 DP400 DP300L 17-950L Drill Press, 34-670 36-600 36-977 36-978 36-980 36-981 TS200LS Table Saw

  • LIFETIME ASSURANCE : All our accessories for sanders, planers, sharpeners, band saws, compressors, drills, including bearings, guide bearings, thrust bearings, drill chucks, drive belts, arbors and band saw tires are backed by top-notch service and EVERLASTING commitment..
  • MADE IN THE USA : Every single drill chuck and arbor is EXCLUSIVELY designed and produced in the USA in line with the highest quality standards. Choose our smooth bearing replacement for dependable performance..
  • WIDE COMPATIBILITY : DNLK drill chucks and arbors are compatible with most brands. Order our heavy duty drill chucks and profit from reduced downtime and maintenance..
  • SUPREME DURABILITY, WEAR RESISTANCE : In addition to a tight fit and flawless operation, our drill chucks and arbors have been tested and have proven to withstand high shocks and heavy-duty loads in both cold and hot environments..
  • DNLK drill chuck will fit Delta Model 11-990 Type 2.
Check Stock