Top Milling Machine Rotary Encoder

RLECS 2pcs Encoder Module Brick Sensor clickable Switch 360 Degree Rotary KY-040 with Knob Cap for Arduino

  • Package: 2 x KY-040 Rotary Decoder Encoder.
  • The encoder can be reset to its initial state, that starts counting from 0 with the button on the rotary.
Check Stock

Taiss / 5Pcs KY-040 Rotary Encoder Module with 15×16.5 mm with Knobs Cap

  • The Material of Knob Cap: aluminium alloy；The Specification of Knob Cap: diameter: 15mm/ 0.59in.
  • The rotary encoder can count the number of pulse output during rotation in the positive direction and reverse direction through the rotation and this rotation counts are not limited.
  • With the key on the rotary encoder, you can reset to the initial state, that is, counting from 0.
  • Package content: 5pcs x Rotary Encoder Module + 5pcs black Knob ..
Check Stock

ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe Assembled Finished Machine EM001

  • ASSEMBLED FINISHED: ETEPOPN EM001 digital DIY oscilloscope kit with case is an assembled finished machine No soldering/assembly work needs It can be....
  • UPGRADED VERSION: The sensitivity of the EM001 has been extended both in width and height which is wider and higher than the others It reaches 5mV/div....
  • HAND-HELD: This updated digital oscilloscope can be hand-held while the others can only be used by placing it on the desktop.
  • ROTARY ENCODER: It has been added the rotary encoder makes parameter adjustment more quicker and easier.
  • WHAT YOU GET: You will get a assembled oscilloscope and BNC-clip cable Detailed Operation instructions troubleshooting guide and schematic are also....
Check Stock

Encoder Metal Gearmotor 12V DC High Speed 300RPM Gear Motor with Encoder for Arduino and 3D Printers

  • ★The rotary encoder can count the number of pulse output during rotation in the positive direction and reverse direction through the rotation and this rotation counts are not limited.
  • ★With the key on the rotary encoder, you can reset to the initial state, that is, counting from 0.
  • ★The Material of Knob Cap: aluminium alloy；The Specification of Knob Cap: diameter: 15mm/ 0.59in.
  • ★Package content: 10pcs x Rotary Encoder Module，10pcs black Knob ..
Check Stock

WSDMAVIS 1 Pcs Rotary Encoder E6B2 CWZ6C E6B2-CWZ6C 1024P/R DC 5-24V for OMRON

  • Type: 2pcs 360 Degrees Rotary Encoder Module, Model: KY-040, Working Voltage: 5V, Pulse Count Per Circle: 20.
  • Purpose: The rotary encoder can count the quantity of output pulse in the positive and negative direction rotation. The rotation counting is unlimited..
  • An incremental encoder is a rotating sensor that converts rotation displacement into a series of digital pulse signals. These pulses are used to control angular displacement..
  • The reading system usually uses differential mode to compare two different waveforms, but the phase difference is 180 degrees, so as to improve the quality and stability of the output signal..
  • With the button on rotary encoder, it can be reset to the initial state, that starts counting from 0..
Check Stock

ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe Power Adapter Assembled Finished Machine Q15001 White

  • ASSEMBLED FINISHED - ETEPOPN Q15001 digital DIY oscilloscope kit with case is an assembled finished machine. No soldering/assembly work needs. It can....
  • UPGRADED VERSION - The sensitivity of the Q15001 has been extended both in width and height, which is wider and higher than the others. It reaches....
  • HAND-HELD - This updated digital oscilloscope can be hand-held, while the others can only be used by placing it on the desktop..
  • ROTARY ENCODER - It has been added the rotary encoder, makes parameter adjustment more quicker and easier..
  • WHAT YOU GET - You will get a assembled oscilloscope, BNC-clip cable and a power adapter. Detailed Operation instructions, troubleshooting guide and....
Check Stock

Maxmoral 2pcs Rotary Encoder Module KY-040 360 Degrees for Arduino Compatible Brick Sensor Switch Development Board

  • The Material of Knob Cap: aluminium alloy.
  • The rotary encoder can count the number of pulse output during rotation in the positive direction and reverse direction through the rotation and this rotation counts are not limited.
  • With the key on the rotary encoder, you can reset to the initial state, that is, counting from 0.
  • Package Content: 10 x Rotary Encoder Module, 5 x Black Knob, 5 x Silver Knob, 1 x 11.8" Female-Male Dupont Cables 50 PIN.
Check Stock

ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe (Assembled Finished Machine) EM001

  • ASSEMBLED FINISHED – ETEPOPN EM001 digital DIY oscilloscope kit with case is an assembled finished machine. No soldering/assembly work needs. It can be used directly to avoid assembling/welding process problems and greatly save your time..
  • UPGRADED VERSION – The sensitivity of the EM001 has been extended both in width and height, which is wider and higher than the others. It reaches 5mV/div – 20V/div, while the others is only 10mV/div – 5v/div..
  • HAND-HELD – This updated digital oscilloscope can be hand-held, while the others can only be used by placing it on the desktop..
  • ROTARY ENCODER – It has been added the rotary encoder, makes parameter adjustment more quicker and easier..
  • WHAT YOU GET – You will get a assembled oscilloscope, BNC-clip cable and a power adapter. Detailed Operation instructions, troubleshooting guide and schematic are also provided..
Check Stock

DaFuRui 10Pack KY-040 Rotary Encoder Module 360 Degree Rotary Encoder Module with Knob Cap for Arduino

  • This incremental rotary encoders Exquisite workmanship ,Quality assurance for 1 years. If there are quality problems within 1 years, you can send us email. We will send you new ones ..
  • Product Name: incremental rotary encoders 600P/R , AB two phases.AB two -phase quadrature output rectangular pulse, the circuit output is NPN open collector output type ..
  • Encoder size ： Encoder size: 38 x 35.5mm/1.49" x 1.39" ；Shaft: 6 x 15mm/0.23" x 0.59"；Axis stopper platform: High 5mm, 20mm；Power source: DC 5-24V；Maximum mechanical speed: 6300 R / min..
  • Connection: white = A phase, Green = B phase, red = power +, black = V0 ； Note: AB two -phase outputs must not be connected directly to VCC, otherwise, they will burn the output transistor..
  • Package content：1 x Incremental Rotary Encoder ；Net Weight : 130g.
Check Stock

Treedix DSO138 Oscilloscope DIY Kit Handheld Digital Oscilloscope 1msps Real-Time Sampling Rate 2.4 inch TFT Display

  • UPGRADED VERSION – The sensitivity of Q15001 has been extended in both directions and is higher and wider. It reaches 5mV/div – 20V/div. Also, this updated version can be handheld..
  • DESIGNING TO YOUR NEEDS – Display and MCU are mounted on the same board (mainboard) to avoid using inter-board pin-headers. Analog channel is placed on a separate board that contains most user install parts, so the analog and digital circuits can be better separated..
  • ROTARY ENCODER – It has been added the rotary encoder, makes parameter adjustment quicker and easier..
  • ASSEMBLED FINISHED – AUKUYEE Q15001 oscilloscope is an Assembled finished Machine. NOT DIY PART, it can be used directly to avoid assembling welding process problems and greatly saves the assembly time..
  • WHAT YOU GET – You will get an assembled oscilloscope, BNC-clip cable and a power pupply. Detailed Operation instructions troubleshooting guide and schematic are also provided..
Check Stock

Manual Pulse Encoder, Portable High Efficiency CNC Pulse Generator for Numerical Control System

  • Long Line Driver Output: The signal output of this CNC encoder is two way quadrature, the output method is long line driver output.
  • High Efficiency: The output pulse of this manual pulse generator is 100 PPR, has high working efficiency with stable performance.
  • Simple Operation and Installation: The operation is simple and smoothly, will not stuck, and the installation is easy with 4 terminal connection.
  • Sturdy and Durable: The electronic CNC encoder is made of high quality aluminum alloy material, which is sturdy and durable.
  • Wide Usage: This manual pulse encoder is widely used in CNC numerical control systems, such as CNC lathes, CNC grinding machines, CNC milling machines, engraving machines, etc..
Check Stock

Manual Pulse Encoder, Portable Smoothly Operation CNC Pulse Generator 4 Terminal for Grinding Machine

  • Long Line Driver Output: The signal output of this CNC encoder is two way quadrature, the output method is long line driver output.
  • High Efficiency: The output pulse of this manual pulse generator is 100 PPR, has high working efficiency with stable performance.
  • Simple Operation and Installation: The operation is simple and smoothly, will not stuck, and the installation is easy with 4 terminal connection.
  • Sturdy and Durable: The electronic CNC encoder is made of high quality aluminum alloy material, which is sturdy and durable.
  • Wide Usage: This manual pulse encoder is widely used in CNC numerical control systems, such as CNC lathes, CNC grinding machines, CNC milling machines, engraving machines, etc..
Check Stock