Top Milling Machine Spindle Lock

MYSWEETY 2 in 1 5500mW CNC 3018Pro-M Engraver Machine, GRBL Control 3 Axis DIY CNC Router with 5.5W Module Kit, Plastic Acrylic PCB PVC Wood Carving Milling Engraving Machine with Offline Controller

  • ...aving process. A great tool for entrance CNC. Able to curved text on daily materials easily. Great for those who are interested in CNC, helping you engrave the model efficiently..
  • Come with 5.5W 5500mW module - Can be carved wood, bamboo, paper, leather, flammable plastic, PCB, PVC, acrylic(Only suitable for spindle milling cutter engraving). Can not work on metal, iron, glass, 201/304 stainless steel, jewelry, aluminum or silver..
  • Large Working Area- With an effective engraving area of 300 x 180 x 45 mm (11.8 x 7.1 x 1.8), the 3018pro-M can easily accommodate most projects. Control software: GRBL.
  • Spindle: 775 spindle motor (12-36V) 24V:10000r / min. Supported System: Windows XP / Win 7 / Win 8 / Win 10..
  • New Control Board- Integrated driver chip + fixed heat sink + external fan + sturdy casing to extend the life of the control board, Self-contained short circuit protection, Not easy to damage. 12 Months Warranty. It come with the spindle motor and 5.5W module on Z axis. If you use the spindle, please remove the module..
  • Simple Assembly- Assembly instructions are provided, but if you get stuck, contact us with any questions that arise. Thank you!.
Check Stock

CNC Spindle, MYSWEETY 500W Air Cooled 0.5kw Milling Motor and Spindle Speed Power Converter and 52mm Clamp and 13pcs ER11 Collet for DIY Engraving

  • ️【CNC Spindle kit 500W】- 1 x 500W Air-Cooled Spindle Motor, 1 x AC110V/220V Speed Governor with MACH3, 1 x 52mm Mount bracket, 13 x ER11 collect, 10 x V Bit Cutter, 4 x Screws(free)..
  • ️【500W CNC Spindle motor】- Operating voltage: 100VDC, Power: 500W, Input: AC110V, Speed: Up to idle up to 12,000 rev / min, Torque: 5000G/CM. Insulation resistance:> 2 megohms, Dielectric strength: 400V. Motor Length: 200MM, High precision spindle run out 0.01-0.03..
  • ️【Speed Power Switch】- Input voltage: AC110V/220V, 50/60Hz. Output current peak: 6A. Output voltage: DC0-100V. Please install in the place that is draughty, no dramatic impact, no vibration, no explosion hazard medium, no conductive metal particle..
  • ️【 52mm Mount Bracket】- Made of high quality cast aluminum, this spindle motor bracket clamp is strong and durable. Diameter: 52mm, Chuck portion length: 45MM, Chuck portion diameter: 16mm..
  • ️【ER11 Collet Chuck】- 13Pcs ER11 Collet Set Gripping Range: 1MM to 7MM(1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm). Run-out tolerance 0.01mm. For CNC milling Lathe Tool & Work holding Engraving machine..
Check Stock

Collet Chuck Holder MT4 ER32 M16 Carbon Steel Collet Chuck Tooling Holder CNC Milling Lathe Tool with Wrench for Various Types of Drilling and Milling Machine Spindle Morse Taper Machine

  • ☀ [FEATURE] --- ER straight extension rod, long shaft, suitable for deep hole machining. Straight-type handle body for holding small drilling, milling tools..
  • ☀ [PRACTICALITY] --- You can reduce the use of longer tools, which can reduce costs and improve efficiency. Stable diameter, other parts have been accurate ground to eliminate imbalance..
  • ☀ [HIGH STRENGTH] --- ER32 Collet Holder is made of durable carbon steel, high accurate, tighten the nut straight, high rigidity, strong clamping..
  • ☀ [APPLICATION] --- Mainly used for various types of drilling and milling machine, spindle Morse taper machine..
  • ☀ [QUALITY ASSURENCE] --- If you have any question or need some suggestion about the products we sold, please feel free to contact us, we will provide you with quality after-sales service..
Check Stock

Red Machine - Hunt or Be Hunted ( Into the Grizzly Maze ) [ NON-USA FORMAT, PAL, Reg.2 Import - Netherlands ]

  • Now here is a Mini Milling Machine that has more features than some Mill/Drills and is affordable for everyone. This little brute will handle any kind.
  • No belt changes necessary! The variable speed control and gear drive saves you time and hassle—Truly a remarkable machine.
  • Features: • Dovetail column • Safety shut off switch • Adjustable depth stop • Fine feed head control • Geared drive • Clear guard on spindle • Rubber.
Check Stock

Grizzly Industrial H2992-6' 2-Piece Milling Vise

  • Maximize the work area of your milling table and get the maximum spindle to table clearance with this 2 piece milling vise the vise jaw faces measure.
  • The vise jaw faces measures 2 1/4-Inch by 6-Inch and the movable jaw has a 1-Inch range.
  • The bottoms are keyed to speed up alignment.
Check Stock

VFD 220V 0.75KW 1hp Variable Frequency Drive CNC VFD Motor Drive Inverter Converter for Spindle Motor Speed Control HUANYANG HY-Series(0.75KW, 220V)

  • IMPORTANT NOTE: this VFD is applicable to THREE phase motor and NOT support external resistor.Fan runs all the time even though the motor isn't (fan functions need to be customized)..
  • This drive is very suitable for HIGH-SPEED ROTATION motors,such as spindle motor, engraving machine CNC.Work with 220V single phase input and 220V three phase input.you can just connected L1/L2 to any two of VFD input R/S/T.
  • This VFD can be used for constant torque loads (such as hard starting: Air compressors, HVAC units) and variable torque loads (such as pumps, fans, etc). It can be used as a motor speed control and a phase converter.This item use Sine wave PWN(SPWM) for the control system.It is designed which also could use USA 60hz single phase input.Can work well with the Mach 3 controller.
  • Application: Spindle motor.CNC router, CNC machine, milling machine, drilling machine, wingding machine, mixer, extruder, slitter, winder, compressor, ventilator, pump, grinder, conveyor, elevator, centrifuger and other speed control machines.
  • If there are problems in use after you receive,please don't give us negative or natural feedback.Please contact us as soon as possible, we will help you solve problems or help you replace new one ..
Check Stock

Daedalus 52mm Spindle Clamp Mounting Bracket Use for Spindle CNC Milling Motor Machine (52MM Clamp)

  • 【Premium Material】Engraving machine aluminum clamper , cast aluminum material, not easy slide wire, beautiful and durable..
  • 【Surface】All-sandblasting process, Seismic capability, long service life..
  • 【Exterior Design】Unique slot design, easy to lock, high - precision, and easy to remove with non-slip teeth..
  • 【High Quality】High hardness, good elasticity, and not easy to deform..
  • 【Applicable】52MM normally used to replace the spindle fixture of the spindle of a 300w 500w ER11 ER16 brushed spindle motor for CNC engraving machine..
Check Stock

DNA MOTORING TOOLS-00171 Cordless Angle Grinder 12V Variable Speed w/ Spindle Lock Button Battery Indicator Blue Tool Only

  • 【Cordless and Compact】Small fuselage makes it very flexible in your hands, even if you work in a place not close to the power supply, because it....
  • 【Speed Adjustment】A variable speed control with 6+ MAX settings for precise speed adjustement. Maximum grinding diameter is 85mm..
  • 【Spindle Lock Function】Press the spindle lock to prevent spindle rotation when installing or removing discs..
  • 【Safety Protection and Persistence】During operation, the protective cover of the portable grinder can prevent sparks and metal shavings during....
  • 【Wide Application】This angle grinder polishing machine is widely used: dry cutting, rough grinding, etc. Also used for metal and stone grinding,....
Check Stock

SHZOND Collet Set CNC CAT40 Tooling Package ER32 ER16 Collet Set Mill Holder Spanner Drill Chuck (collet set)

  • The collet set comes with 12PC CAT 40 ER32 collets set by 1/16 and 10PC CAT40 ER 16 collets set by 1/32.
  • All collet chuck are high speed proved,high speed true balance in 15-20K RPM.
  • Tenth Accuracy 0.0001in on each ER chuck and collet. Both ER32 and ER16 Chuck Gage or projection length of ER16 is 2.75in.
  • Hardened and ground to ensure maximum accuracy.Through spindle coolant capability from pull stud to collets.
  • Ideal for milling machine, drilling machine or holder, etc.
Check Stock

SHZOND Collet Set CNC CAT40 Tooling Package ER32 ER16 Collet Set Mill Holder Spanner Drill Chuck (collet set)

  • The collet set comes with 12PC CAT 40 ER32 collets set by 1/16 and 10PC CAT40 ER 16 collets set by 1/32.
  • All collet chuck are high speed proved,high speed true balance in 15-20K RPM.
  • Tenth Accuracy 0.0001in on each ER chuck and collet. Both ER32 and ER16 Chuck Gage or projection length of ER16 is 2.75in.
  • Hardened and ground to ensure maximum accuracy.Through spindle coolant capability from pull stud to collets.
  • Ideal for milling machine, drilling machine or holder, etc.
Check Stock

WEN DPA167H Heavy Duty JT33 Keyless Drill Press Chuck with 1/64 to 5/8-Inch Capacity

  • Heavy duty heat-treated drill chuck operates with less than 0.004 inches of runout (0.1 mm).
  • Holds drill bits anywhere from 1/64 to 5/8 inches in diameter.
  • Easily open and close the three chuck jaws without any tools or keys.
  • Universal design fits onto any drill press, milling machine, or CNC lathe with a JT33 spindle.
  • Compatible with WEN models 4208, 4210, 4210T and 4212 drill presses.
Check Stock

Edge Technology Pro Tram System (1/2' Shank / 0.001' Indicators)

  • Square the head of a milling machine quickly and easily. (1/2" Shank Size / 0.001"Indicator graduations).
  • To use the Pro Tram simply lower unit to the table and adjust the head until both indicators read the same..
  • Guaranteed to be equal to or better than any other tramming method or spindle squaring device available..
  • 5" distance between indicators to fit the bed of a 6" vise allowing the head to be trammed to the vise instead of the table. Can be used with a sine bar or sine plate to adjust the head to precise angles..
  • PLEASE SCROLL DOWN FOR TECHNICAL DRAWING AND MORE DETAILS..
Check Stock