Top Milling Machine Tool Holder

Milling Tool Holder, Chuck Holder C20-FMB22 Not Rusty Hard Alloy for Processing Steel and Cast Iron

  • After many inspections before leaving the factory, the quality is guaranteed, you can use it with confidence..
  • With good chemical stability, heat resistance and abrasion resistance, the holder is in high hardness..
  • Easy to use and not rusty, such chuck holder is easy to use in the practical life..
  • Furthermore, this milling arbor adapter is suitable for processing steel and cast iron, soft stainless steel and aluminum..
  • Made of high-quality hard alloy cutter head, the milling tool holder is with exquisite workmanship and durable..
Check Stock

2 Axis Metal Case LCD DRO Digital Readout Display for Mill Milling/Lathe Machine (2 Axis DRO)

  • ...Meanwell Power supply ,Omran Key button.Switch on& Switch off can meet more than 100000 times.
  • [HIGH Performance】-Acceptable resolution: 10um ,5um ,2um ,1um , 0.5um.
  • Min resolution of digital display angle :0.0001/pulse, Linear Scale/Magnetic scale Interface: DB9(TTL/EIA-422-A).
  • 【Wide Application】Applicable for milling machine, drilling machine, grinding machine, lathes, profile projector, video measuring machine, position monitoring, coordinate measurement,.
  • 【Special Function】1:Tool radius compensation: In the use of cylindrical milling tool carrier, the tool radius must be taken into account. The direction of process will decide the increase or decrease of calculated value .Once the tool number is inputted, the DRO value will be saved. 2 :Determine the workpiece centre: Only through the tool or touching the two points of workpiece, the DRO can calculate the workpiece centre.
  • 3 :200 sets tool base: While repeat the same process in the workpiece, you can store the tool value which will be convenience to the operator Round arc processing: Sample round processing and two axis arc processing.
  • 4:Slope calculation: Input the two points of workpiece, the DRO can calculate the slope of the workpiece..
Check Stock

Milling Tool Holder, Not Rusty Chuck Holder CNC Milling Holder Straight Shank End for Processing Steel and Cast Iron

  • Furthermore, this milling arbor adapter is suitable for processing steel and cast iron, soft stainless steel and aluminum..
  • Made of high-quality hard alloy cutter head, the milling tool holder is with exquisite workmanship and durable..
  • Easy to use and not rusty, such chuck holder is easy to use in the practical life..
  • With good chemical stability, heat resistance and abrasion resistance, the holder is in high hardness..
  • After many inspections before leaving the factory, the quality is guaranteed, you can use it with confidence..
Check Stock

Chuck Holder, Hard Alloy Straight Shank End CNC Milling Holder Milling Tool Holder for Processing Steel and Cast Iron

  • With good chemical stability, heat resistance and abrasion resistance, the holder is in high hardness..
  • Furthermore, this milling arbor adapter is suitable for processing steel and cast iron, soft stainless steel and aluminum..
  • After many inspections before leaving the factory, the quality is guaranteed, you can use it with confidence..
  • Made of high-quality hard alloy cutter head, the milling tool holder is with exquisite workmanship and durable..
  • Easy to use and not rusty, such chuck holder is easy to use in the practical life..
Check Stock

LGXEnzhuo Manually Operated HDPE Butt Fusion Welding Machine 4 Clamps Pipe Fusion Welder Manual PE PP PB PVDF Pipe Hot Melt Machine 110V 63-160mm

  • ... 【PARAMETER】Model No.:2.48"-6.30" (63-160mm) 4 clamps.
  • Welding level(Φ, mm)outer dia: 2.48" (63mm), 2.95" (75mm), 3.54" (90mm), 4.33" (110mm), 4.92" (125mm), 5.51" (140mm), 6.30" (160mm).
  • 【FEATURES】Features of manual hot melt butt welding machine: It consists of four parts: frame, milling cutter, independent heating plate, milling cutter and heating plate bracket.
  • 【HIGH QUALITY】The heating plate adopts an independent temperature control system and is coated with PTFE.
  • The main part of the frame is made of aluminum alloy material, which is simple in structure, compact and easy to use.
  • 【EASY TO USE】Electric milling method is adopted, with single and double-sided milling functions.
  • the milling inserts are made of high-quality tool steel, double-edged design, and can be used on both sides.
Check Stock

ACTOOLS Lathe Milling Vertical Slide & 50 mm Self Centering Vise Vice-Engineering Tools

  • Lathe Vertical Milling Slide T-Slotted Caste Iron Bed of 125 mm X 100 mm in milling slide.
  • Vertical milling slide movement is approx 80 mm. Has 3 T- Slots on Table 10 mm Wide at the top of the T is 15 mm wide at the bottom of the Tee allows milling on your lathe machine.
  • Hardened Jaws with Horizontal / vertical Vee.
  • Maximum Jaw Opening 55 mm, Jaw Depth 28 mm.
  • Supplied with a 50 mm Caste Iron Self Centering Vice.
Check Stock

2\ Boring Head SET 12 Pcs Carbide Boring Bars MT2 -M10 F1-12 50mm Boring Head With 9pcs 12mm Boring Bars Milling Machine Accessories

  • This tool set is made of high quality material, good wear resistance, and durable in use.
  • The product is the main accessories of boring and CNC milling machine tools like coordinate boring machine, horizontal boring machine, ordinary boring..
  • It can be used for boring, boring outer circle, boring end face, boring ladder hole, boring hole end face, cut the hole and the outer ring groove and other processing..
  • This tool set contains boring head,Boring Bars, perfect for the milling machine.
Check Stock

Urtzcoye Cordless Angle Grinder Tool with Cutting Machine Table Saw adaptor 21V

  • 4AH Long Lasting Battery --- Equipped with super large capacity replaceable lithium battery which can provide supper long working time and also with ultra fast charging, let your get rid of cord messing and out of power dilemma. Great tool for use at anytime anywhere..
  • Adjustable Speed --- This cordless angle grinder tool with 2 degree speed for choose, push the power button to control easy operation to meet different working needs.
  • Easy Replace Disc & Wide Application --- Spindle lock switch help quick replace disc grinding disc, improve working efficiency. This machine can use for milling, grinding, polishing, cutting, stone grooving and cooperate with saw blades for logging working, etc..
  • Angle Grinder Holder sliding cutting, stable operation, large cutting range, the maximum clamping angle of the clamp can reach 45°, and the maximum clamping length is 15cm..
Check Stock

TE-CO 20413 Machinist Clamp Kit, 1/2\ Table T-Slot x 3/8-16\ Stud, 52 Pieces

  • Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder.
  • For workholding during machining applications.
  • 1/2" machine tool table T-slot to fit 1/2" T-slot nuts.
  • Bridgeport type milling machines use Part No. 20402.
  • Made from case hardened 1018 steel with a black-oxide finish.
Check Stock

TE-CO 20402 Machinist Clamp Kit, 5/8\ Table T-Slot x 1/2-13\ Stud, 52 Pieces

  • Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder.
  • For workholding during machining applications.
  • 5/8" machine tool table T-slot to fit 5/8" T-slot nuts.
  • Bridgeport type milling machines use Part No. 20402.
  • Made from case hardened 1018 steel with a black-oxide finish.
Check Stock

TE-CO 20401 Machinist Clamp Kit, 9/16\ Table T-Slot x 1/2-13\ Stud, 52 Pieces

  • Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder.
  • For workholding during machining applications.
  • 9/16" machine tool table T-slot to fit 9/16" T-slot nuts.
  • Bridgeport type milling machines use Part No. 20402.
  • Made from case hardened 1018 steel with a black-oxide finish.
Check Stock

uxcell HSS Lathe Tool Bit 10mm x 10mm x 200mm, Square Lathe Turning Tool Blanks, High Speed Steel Rectangular Fly Cutter Mill Blank

  • Specifications: Size: 10mm x 10mm x 200mm, hardness HRC60~62. High-speed steel lathe tool bit.
  • General Purpose: HSS tool bit is a superior finishing tool for cuts in hard materials of mild steel, alloy and tool steel.
  • Versatile Tool Bit: Ideal for milling, turning, parting, engraving, drilling, punching, etc. Commonly used on a lathe, a milling machine fly cutter or a metal shaper.
  • Features: Parallel style cutter is with continuous width of cutting edge throughout length of tool bit.
  • High-speed Steel Tool: High-speed steel tool bit is with combination of hardness and toughness for wear resistance.
Check Stock