Top Milling Machine Worktable Clamp

Parallel Block Adjustable 0.0005 Accuracy Adjustable Parallel Block 10 pairs for Machine Pliers design use

  • The size and parallelism of the product provides the actual, reliable and accurate position of the workpiece..
  • They are also easy to use in machine pliers for leveling and adjustment of milling and grinding machines, forming machines, planers, rigs, and many other applications..
  • Made of high quality steel after hardening, stress relief and fine grinding..
  • Adjustable parallel pad has a wide range of uses in design, metering and inspection work and in setting up various machine tools..
  • Simple and economical operation in drilling, milling, assembly and other work. And can easily clamp a set of workpieces..
Check Stock

Electric Meat Grinder 2000W, Sausage Grinder with 3 Grinding Plates and Sausage Stuffing Tubes for Home Use &Commercial, Stainless Steel

  • ...ll using premium 304 stainless steel material for aesthetic appearance, anti-corrosion, and rust resistance. The blade is made from solid 430 stainless steel with higher hardness. Our hand grinder for food is fully disassembled for quick and easy clean-up..
  • Three Major Functions: Meat grinding+ sausage suffer+ grain milling machine.
  • Quickly & easily grind meat, pepper, coffee bean,vegetables when installing the meat plate and a cross knife at the outlet. It is a sausage stuffer when the sausage nozzle is installed. Our food grinders manual also can transfer to a grain milling machine by mounting the mill head and then can used to ground coffee..
  • Double Fixing & Easy To Use: The double fixed design of tabletop clamp + suction cup bottom can be used flexibly in different positions. Clamp-on style easily attaches to any countertop up to 2 inches thick. The suction cup can be installed on any flat surface. You can operate our food meat grinder effortlessly with the ergonomically designed crank handle..
  • Practical Accessories: Available in 2 different sizes of hole plates, 8 mm and 6 mm, which can be replaced as your demands.
  • This sausage filling machine also offers you the cleaning brush, shaft sleeve, pushing rod, and other accessories for your convenient u....
Check Stock

Fowler 52-475-050-0, All-Angle V-Block and Clamp with 1.3125\ Capacity

  • Angle Clamp: The sides of this clamp set are parallel while the V is central and ground with a central hole provided for drilling or removing pins.
  • Machinist Tool: V-block set has four 3/8"-16 tapped holes, two in the bottom and one on each side for angle non-clamping.
  • Durable Construction: Made of hardened and precision ground tool steel, this angle V-block is perfect for grinding, milling, or drilling.
  • Dimensions: This V-clamp is 3-5/8" long, 1-7/8" wide, and 1-7/8" high (including clamp) with a holding capacity of 1-5/16".
  • High Accuracy: Sides are parallel and V is central and ground to .0003".
Check Stock

Happybuy 3 Inch Heavy Duty Milling Vise Bench Clamp Vise High Precision Clamping Vise 3 Inch Jaw Width with 360 Degree Swiveling Base CNC Vise

  • Premium Quality Structure: The whole bench clamp is made of high-quality iron material with high hardness and stiffness. Designed for long-term service time..
  • Powerful Clamping Force: After fine grinding treatment, the surface of the clamp is smooth and flat. Swiveling vise features with the perfectly aligned precision jaw. Maximum clamping force of 15 KN..
  • 360° Rotating Base: Swiveling base increases flexibility when in use. This enables the stationarity and stability of workpieces so they won’t move even slightly if much force has been applied by the fitter..
  • High Accuracy Screw: The screw rod connected with a universal handle is made of high strength material which is not easy to deform, wear resistance, and achieves smooth rotation..
  • Wide Application: Precision milling drilling vise, suitable for milling, drilling machine, and precision parts finishing. Most work of the fitters can be completed by using this clamping vise such as sawing, filing, chiseling and some assembly and removal jobs..
Check Stock

Vise Jaw Stop

  • Unique design stays completely below the top surface of vise jaws for cutter clearance..
  • Stop rod stays parallel to the milling machine table so workpiece will contact rod face squarely for increased accuracy..
  • Versatile design allows the 5/16" hardened stop rod to be quickly and accurately positioned..
  • Large 1/2-13" socket head cap screws rigidly clamp the unit in position after adjustments are made. 5/8" T-nut included..
  • PLEASE SEE MANUFACTURER WEBSITE FOR TECHNICAL DRAWING..
Check Stock

Face Mill Shoulder Cutter BAP400R-50-22-4T 90 Degree Square Shoulder Indexable CNC 4 Flutes Face Mill Shoulder Milling Cutter with Wrench and Box

  • GREAT TOOL FOR CNC MILLING MACHINE--This BAP400R-50-22-4T Square Shoulder Face Mill Cutter is designed for CNC milling machine.
  • HIGH GRADE ALLOY STEEL MATERIAL--This Square Shoulder Indexable Face Milling Cutter is made of high quality alloy steel, which is featured with high hardness and good durability to ensure a long term service.
  • GREAT REPLACEMENT TOOL FOR YOU--This Face Shoulder Milling Cutter is regarded as an essential mill parts for milling machine, and it is very convenient to use it to replace the broken one or the old one.
  • USEFUL BOX FOR CONVENIENT STORAGE AND PROTECTION--There comes with a plastic box for easy storage and carriage, and it can provide good protection for the tool as well.
Check Stock

DIY Mini Electric Belt Sander Multifunctional Grinding Machine, Electric Knife Apex Edge Sharpener, Small DIY Polishing Machine with 10 pcs Sand Belts

  • The Mini Belt Sander machine body is made of all stainless steel, strong and wear-resistant, can be used for high-speed steel drill bit grinding..
  • The worktable angle can be adjusted at 45 degree up and down..
  • The belt can be replaced very easily by pulling the top two wheels..
  • The mini belt sander is with 4 pcs rubber foot pads to adjust height and absorb shock. They can be removed so that you can clamp it to table..
  • With built-in double bearing in the abrasive belt wheels, it is easy to use and smooth to operate..
Check Stock

D26 Milling Machine Ball Handle Three Ball Handles Three Ball Rocking Handle Three Pills Handle Ball Crank 16mm Inner Hole Diameter

  • The milling machine's three-ball crank is made of high-hardness material and is durable enough for most milling machines and work benches..
  • The surface of the three-ball crank of the milling machine has been carefully polished, with high gloss and beautiful appearance, eliminating burrs and safe use..
  • The olive-shaped hand-held part of the three-ball crank of the milling machine is ergonomically designed for comfortable grip and reduced work load..
  • The inner diameter of the three-ball crank of the milling machine is about 16mm in diameter, which is closely connected with other parts of the milling machine and is easy to operate..
  • We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..
Check Stock

PENSON & CO. 5/8

  • Clamp a wide range of workpieces securely to the table while machining, milling or drilling.
  • Made of high grade steel and all the blocks, bolts, nuts and hold-downs are case hardened..
  • Racks can be bolted to the wall or side of machine for easy access. Best among mini clamps press tool sets.
  • This machine clamping kit provides a variety of add-ons to fully utilize Central Machinery's two speed variable bench mill/drill machine.
  • Include a variety of flange nuts, tee nuts, step blocks, coupling nuts, studs and hold down bars to fit almost any machine clamping need.Description58Pc Deluxe Steel Clamping Kit 5/8" T-Slot 1/2"-13 Stud-Size for Bridgeport Mill.
  • Compatible with all Bridgeport and Bridgeport type machines.
  • Well-organized set with each tool having it's slot.
Check Stock

Ladieshow MT2-FMB22 Face Mill Holder + 400R-50-22 CNC Lather End Milling Cutter + 10pcs APMT1604 Carbide

  • Sturdy and Durable: The end mill set is made of carbide material, with high hardness, high strength, not easy to deform and damage, good impact resistance and long service life.
  • High-Precision Machining: The milling cutter kit adopts high-precision machining technology, and the surface adopts new coating technology, which has good oxidation resistance and high temperature resistance.
  • Machining Range: Face CNC milling cutters are suitable for precision machining, roughing, flat and step machining and are the ideal toolkit for heavy duty CNC milling.
  • High Speed: Face end mills have better cleanliness and more stable accuracy, and the rotation and milling feed rates are 3 times faster than ordinary milling cutters.
  • Widely Used: Face milling cutter is a common main accessory for milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
Check Stock

TE-CO 20413 Machinist Clamp Kit, 1/2\ Table T-Slot x 3/8-16\ Stud, 52 Pieces

  • Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder.
  • For workholding during machining applications.
  • 1/2" machine tool table T-slot to fit 1/2" T-slot nuts.
  • Bridgeport type milling machines use Part No. 20402.
  • Made from case hardened 1018 steel with a black-oxide finish.
Check Stock

TE-CO 20402 Machinist Clamp Kit, 5/8\ Table T-Slot x 1/2-13\ Stud, 52 Pieces

  • Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder.
  • For workholding during machining applications.
  • 5/8" machine tool table T-slot to fit 5/8" T-slot nuts.
  • Bridgeport type milling machines use Part No. 20402.
  • Made from case hardened 1018 steel with a black-oxide finish.
Check Stock