Top Milling Wheel

uxcell Hand Wheel 63mm Diameter 8mm Hole Diameter for Milling Machine

  • Center Bore Diameter (Approx.): 8mm / 0.32".
  • Wheel Height(without handle): 30mm / 1.18".
  • 1 x Revolving Handle (Mounting screws are NOT included.).
  • It is widely used in industrial machine tools, such as milling machine, lathes, grinders etc..
Check Stock

Milling on the Drill Press (DVD, 4 Hours)

  • 【Much More Powerful】The motor power of RCOG-25V milling drilling machine has a 1100W brushless spindle drive motor providing tremendous torque and variable speeds from 50-22250 RPM continuously, with overload and overheating protection fuction.The noise of this motor is very low and it is very easy to maintain.So much power will make your work much more efficient..
  • 【Parameters】Metric Scale MT3 Milling Machine adopts high precision grinding all steel spindle with excellent strength grinding gear,X axis:18.9",Y axis:6.9",Z axis:11",it has own DRO for 3 axis.Headstock swivels 360 degrees.Max drilling diameter:0.9",Max Face screening capacity:2.5",Max vertical milling capacity:0.79",Distance from spindle to table:13.8",Spindle taper:MT3,Table size:27.5"x7.1".The speed display shows inch..
  • 【Micro-Feed Precision】Benchtop Milling Drilling Machine has a micro-feed function,the accuracy is up to 0.01'', only need to tighten the middle nut of the right hand wheel to achieve the micro-feed function, loosen the nut to achieve the manual up and down movement function.Integrated cross worktable,width is widened,with high pr....
Check Stock

IH-S-ITURBO IHC Turbo Service Manual

  • New Designed 8 blade Flank Billet compressor wheel(Point Milling wheel is available).
  • Fit Vehicle: Universal turbo for performance use, racing car etc..
  • Fit engine: displacement 1.4L-2.5L, Making 275-550HP.
Check Stock

Masmoc 4\ Metal Handwheel Fit 1/2\ Shaft of Table Saw Drill Press Lathe Turning CNC, Round Hand Wheel Crank Come with Set Screws and Disassemble Handle

  • This handwheel is designed with consumer convenience in mind,the item provides everything you all need including 4pcs SET SCREWS (2PCS is the backup one) and installing hex key wrench. Insert the shaft into the hole in the handle hub and tighten the provided set screw and a solid construction immediately is finished.It doesn't matter if the shaft is star, key-way, hexagonal, or smaller than 1/2”.
  • Handwheel Total Diameter: 100 mm / 4 inch, Center Bore Diameter (approx.): 12 mm / 1/2 inch. The package comes with 1 pcs round handwheel, 1pcs handle,4PCS SET SCREWS, 1pcs hex key wrench.
  • The hand crank wheel is made of metal material and the handle is made of high quality phenolic resin, with strong insulation and durability.
  • Masmoc handwheels is fit for 1/2” or smaller shaft but it can be expanded to expand the scope of use.
  • Widely used in industrial machine tools, such as Universal or horizontal - handle crank wheel on CNC milling machine bed.Universal or horizontal - handle crank wheel on CNC milling machine bed,Surface rotary Grinder Machine, Cylindical grinder, sharing machine,Boring machine, profile cutting machine, Turning CNC,Table saw, Band saw, Radial arm saw, Contractor saw, Cabinet Saw.
Check Stock

BestEquip Rotary Table 4inch/100mm Horizontal Vertical Rotary Table 4-Slot Rotary Table for Milling Machine Rotary Table for Milling 360 Degrees Precision Rotary Table

  • 4" Vertical & Horizontal Design: Our rotary table for milling machine is 4"/100mm with 4 slot can be used in both horizontal and vertical....
  • Remarkable Quality: HT200 Casting is mainly used to cast parts subjected to pressure and vibration on mechanical equipment, offering rotary table for....
  • Excellent Precision: The precision rotary table' indexing plate can be graduated 360 Degrees. Resetting dial and hand wheel can be graduated in....
  • Convenient To Adjust: The dial is marked with an accurate scale. Just operate the control handle and adjust it to the desired position, which makes it....
  • Multiple Application: With free wrench and set of screws, the power milling machines are widely used in mini milling machine like index boring,....
Check Stock

3 Spoke Hand Wheel with Revolving Handle Black Bakelite Round Three Handwheel 12x125mm for Lathe Milling Machine

  • Center Bore Diameter (Approx.): 12mm / 0.47"".
  • It is widely used in industrial machine tools, such as milling machine, lathes, grinders etc..
Check Stock

Othmro 1Pcs Hand Wheel 16mm Center Hole Diameter 160mm Handwheel Diameter Black 2 Spoked Lathe Handwheel Round Three Hand Wheel with Revolving Handle for Lathe Milling Machine Grinders

  • 【Excellent Material】- The lathe milling hand wheel is made of high quality plastic, modern-design, strong insulation and durable in use..
  • 【Standard Size】- These hand wheels are bored to the standard shaft diameter for their size, and are also tapped for a removable handle..
  • 【Easy to Use】- The hand wheel comes with screw hole for easy handle assembly. Hand wheels are ideal for any application where general or precise adjustments need to be made via a turning mechanism..
  • 【Mainly Used】- These hand wheels are ideal for any application where general or precise adjustments need to be made via a turning mechanism..
  • 【Wide Application】- The control hand wheels is widely used in industrial machine tools, such as milling machine, lathes, grinders etc..
Check Stock

Othmro 1Pcs Round Three Hand Wheel 0.63in Center Hole Diameter 6.3in Handwheel Diameter Black Bakelite 3 Spoked Lathe Handwheel Hand Wheel with Revolving Handle for Milling Machine Lathes Grinders

  • 【Excellent Material】- The lathe milling hand wheel is made of high quality plastic, modern-design, strong insulation and durable in use..
  • 【Standard Size】- These hand wheels are bored to the standard shaft diameter for their size, and are also tapped for a removable handle..
  • 【Easy to Use】- The hand wheel comes with screw hole for easy handle assembly. Hand wheels are ideal for any application where general or precise adjustments need to be made via a turning mechanism..
  • 【Mainly Used】- These hand wheels are ideal for any application where general or precise adjustments need to be made via a turning mechanism..
  • 【Wide Application】- The control hand wheels is widely used in industrial machine tools, such as milling machine, lathes, grinders etc..
Check Stock

TECHTONGDA Mini Milling Machine MT3 Mill Drill Machine Benchtop Mill/Drill Milling Drilling Machine Brushless Motor Variable Speed with Digital Readout 110V 1100W

  • ⚒️ The Mini Milling Machine with drilling, milling groove, plane milling chamfering and other functions, suitable for all kinds of metal, wood and other materials fine processing, widely used in machinery manufacturing,woodworking DIY and so on..
  • ⚒️ Machine head tilt, Spindle incline Angle: ±90°(The nose can actually rotate 360 degrees), Spindle taper: MT3, Max. drilling diameter: 0.9"(25mm), Distance from spindle to table: 13.8"(350mm), Spindle stroke: 2"(52mm), Table size: 27.5"*7.1"(700mm*180mm).
  • ⚒️ 1100W Strong Power. The Benchtop Mill/Drill Machine with 1100W brushless motor, Infinitely Variable-Speed, The Range of spindle speeds: 50-2250rpm.
  • ⚒️ Spindle high precision feed, one piece steel handle bar, hand wheel adjustment with fine adjustment switch, high precision machining, accurate to 0.01MM..
  • ⚒️ Widened working table: 27.5"*7.1"(700mm*180mm), artificial fine grinding, integrated casting, T-slot convenient fixture fixation. High quality and Durable..
Check Stock

Milling Hand Wheel ,1063mm Solid Bakelite Hand Wheel Scale Handwheel Machinery Accessory Industrial Machine Tool ,for Lathe Milling Machine

  • Product Name : Hand Wheel w Revolving Handle.
  • Center Bore Diameter (Approx.) : 12mm / 0.47".
  • Revolving Handle Size (Approx.) : 22 x 80mm / 0.8" x 3.1" (Max D * H).
  • Design with revolving handle, hand wheel has threaded hole for easy handle assembly..
  • Widely used in industrial machine tools, such as milling machine, lathes, grinders etc..
Check Stock

Houseuse 4\ Diameter Round Iron Hand Wheel Handwheel for Milling Machine Lathe

  • Modern-design Hand Wheel, polished rim. Widely used in industrial machine tools, such as milling machine, lathes, grinders etc..
  • Design with revolving handle, hand wheel has threaded hole for easy handle assembly..
  • These Hand Wheels are bored to the shaft diameter for their size, and are also tapped for a Removable Handle..
  • Handwheel is good for any application where general or precise adjustments need to be made a turning mechanism..
  • Handle Size: 62 x 22 / 2.44" x 0.87"(L*Max.D ).
  • Fixing Thread Hole Size: M6 ( Fixing screws are not included here.).
Check Stock

uxcell Hand Wheel 125mm x 12mm Hole Diameter for Milling Machine Black

  • Commonly used in conjunction with 8mm trapezoidal screw ,can be used to control the slide operation manually..
  • Widely used in industrial machine tools, such as milling machine, lathes, grinders etc..
  • Design with revolving handle, hand wheel has threaded hole for easy handle assembly..
  • High-quality, modern-design Hand Wheel, polished rim..
  • Note: This product does not include set screw. You need prepare M5 screws..
Check Stock