Top Milwaukee M1drill Driver Kit

Milwaukee Instruments MC720 Dosing Pump Kit

  • The Milwaukee Instruments MC720 Dosing Pump Kit combines the Milwaukee Instruments MC122 pH Controller and Milwaukee Instruments MP810 Dosing Pump to provide fully automated pH control of aqueous solutions in hydroponic systems..
  • It has been specifically designed to control the pH in mixing tanks for fertilization.
  • The small and precise flow of the peristaltic pump allows you to maintain ideal pH values in your tank..
  • After selecting the desired pH setting from 5.5 to 9.5 pH, the pH controller measures the pH value of the solution and automatically adds pH adjustment (acid or alkaline) to change the liquid’s pH to the selected level.
Check Stock

Hardwerks Universal Fit Magnetic Bit Holder, Securely Mounts to Belt Clip Screw, Fits Both Left and Right Side of Driver, for Milwaukee, DeWalt, Ridgid, Makita, Bosch, Ryobi, More (2 Pack, Premium)

  • Phillips, torx, square drive? Stop running around searching for the right bit. Keep them right on your impact driver or drill with five storage locations which you to keep your most used ¼" hex bits with you at all times. Includes 2 bit holders and mounting screws for all brands. Fits Milwaukee M18, Dewalt, Bosch, Ryobi, Makita and some Ridgid drills and drivers. See pictures for specific fitments..
  • Mounts on either side of your tool and works with or without the belt clip. Many bit holders only mount on the right side of your tool so they get in the way when you are grabbing your driver and make bit changes harder if you are right handed. The Hardwerks bit holder works with or without Milwaukee and Dewalt belt clips as well as available universal belt clips for other brands..
  • Wondering where to put loose screws while you are working or how to carry that long drill bit? Stick your screws securely to the exposed magnet on the side of the holder and easily retrieve them when needed. Need to pre-drill or counter sink a hole? Stick the drill bit to the side magnet and take it with you..
  • Upgrade to the premium bit holder for the strongest neodymium magnet available so that even the heaviest bits won’t fall out when your driver is hanging upside down ....
Check Stock

45-69-0030 Band Saw Tire FOR Milwaukee BandSaw Compact Pulley Tires 2629-20 6242-6 2429-20 (4.0' Diameter Tires)- 2 Pack

  • 【milwaukee bandsaw rubber tire 】For saws that use blade size 35-3/8 in. Compact Bandsaws Model Number: 45-69-0030，Fits Milwaukee 6242-6, 2629-20/22.
  • 【45 69 0030 pulley tire】4.0" Diameter Tires,Used with all Milwaukee Compact Bandsaws.
  • 【bandsaw tire】Compatible with Milwaukee following band saws: 2629-20 (SER C14A,B,C,D) Cordless 18V Compact Band Saw， 6242-6 (C13A,B,C) AC Compact Band Saw， 2429-20 (E25A,B) Cordless M12 Compact Band Saw， 2429-21XC Cordless M12 Compact Band Saw， 2629-22(C14A,B) M18 Cordless LITHIUM-ION Multi-Tool Kit..
  • 【FEATURES 】The belt is made of high-quality material,soft and elastic,not easy to crack, long service life,It does not dry out and crack like other rubber tires. tires can be stretched,this increases their efficiency and life expectancy..
  • 【2629 20 pulley tire】Easy to install & remove with no need for adhesive, When installing, please stretch the tire to fit the wheel tightly. Inspect belts periodically and replace when worn to maintain peak performance..
Check Stock

Red Line 90226 Powersport Motor Oil V-Twin 20W50 Powerpack Kit

  • Complete kit for motorcycles equipped with Evolution, Milwaukee-Eight and Twin-Cam engines*.
  • 2007-up H-D motorcycle with the 96-inch and larger Twin Cam engines, users must purchase one extra bottle of Primary Chain Case Oil to meet this engine’s 38 oz (45 oz dry) capacity, compared to the 32 oz wet capacity of a Milwaukee-Eight, Evolution or V-Twin case.
  • Includes 5 quarts of 20W50 Motorcycle Oil, 1 quart of V-Twin Transmission Oil with ShockProof, 1 quart of Primary Chain Case Oil, 1 bottle of Fuel Injection Cleaner for Powersports, a sticker kit, a Red Line Oil embroidered hat and a versatile funnel.
  • Each kit has been tested for compatibility and includes enough fluids for a complete oil change*.
  • Users must check vehicle specifications for capacity to ensure against overfilling, as full quarts may provide more product than necessary.
Check Stock

SDS Plus Ground Rod Driver for 5/8 Inch and 3/4 Inch Ground Rods, Fit All SDS-Plus Rotary Hammer Drills 13/16'X 6-11/16'(20x170mm)

  • The Industrial grade SDS-Plus ground rod driver is designed to drive 5/8" and 3/4" ground rods or rebar. Save a lot of manual hammering work..
  • SIZE : 6.7" (170mm) Length and 3/4" (20mm) ID and 1" (25mm) OD.
  • MATERIAL : SDS Plus Ground Rod Driver made of high quality hardened steel，Metal thick wall for impact, rust and corrosion resistance. One-piece design, reusable..
  • COMPATIBLE:The ground rod driver is compatible with Bosch, Dewalt, Hilti, Makita, Milwaukee and all other SDS - Plus Ground Rod..
  • SALES SERVICE:we promise unconditional replacement or refund if you have any issue with the ground rod driver. Just click 'contact seller' ,we will exert ourselves to satisfy to you!.
Check Stock

TEMCo TH0405 – 1-1/8” / 30 mm Hex Shank Demo Hammer T Post Driver Attachment

  • Fits 1 1/8” / 30mm hex shank import style Demolition Hammers – Shank style is hex with round end on - PLEASE CHECK YOUR HAMMERS VERY CAREFULLY BEFORE PURCHASE - This bit DOES NOT fit Makita, Milwaukee, Bosch, Dewalt or Hitachi hammers.
  • Turn your demolition hammer into a T-post driver with a deeper socket design the driver maintains alignment and saves time and energy driving t-post or any solid post that is less than 2” in diameter..
  • One-piece machined construction with a 2.5” long 2” Diameter Drive Socket - saves a lot of pounding with a manual t-post driver. The 2” deep socket guarantees easy installation of T posts..
  • Hardened steel body for increased durability –tool hardness specification of 45-55 Rockwell C.
  • Tool finish is perfect for commercial and industrial applications and keeps the tool from rusting (1 Year Guarantee or Full Refund. No Matter What.).
Check Stock

Milwaukee Shockwave Impact Driver Bit Set (100 Piece) 48-32-4083

  • Milwaukee 22-Piece Shockwave Impact Driver Bit Set 48-32-4016.
Check Stock

Khanka Hard Storage Case Replacement for Milwaukee 2485-20 M12 FUEL Right Angle Die Grinder, Case Only

  • Sleek design, a case designed for milwaukee 2485-20 right angle die grinder, fits perfectly. The hard shell of this milwaukee m12 grinder is black. You can put the m12 grinder in a hard case specially designed for the milwaukee right angle die grinder for easy portability when you go out..
  • This milwaukee m12 angle die grinder hard case, the interior is made of high quality velvet, the soft inner structure ensures the protection of the milwaukee tools angle grinder. The milwaukee m12 die grinder has a hard case with a mesh design on one side to store your m12 die grinder accessories and soft storage on the other side for your milwaukee die grinder..
  • This milwaukee die grinder m12 hard shell case is made of high quality EVA material, which is shockproof, dustproof and waterproof, it can protect your milwaukee small angle grinder from shocks and splashes when you go out to carry. Put the milwaukee angle grinder tool in the box after using the milwaukee 2485-20 right angle die grinder at home to prevent the milwaukee m12 grinder from accumulating dust.
  • This hard case designed for m12 2485-20 grinder keeps your milwaukee right angle die grinder safe, convenient and lightweight. The classic zipper design makes it easy to open and close. This milwaukee m12 ang....
Check Stock

Milwaukee Bundle Cordless M18 18 Volt 1/2' Impact 2767-20 Wrench with 48-11-1850 Redlithium XC 5.0AH Battery

  • All-metal gear case and 1/2 in. metal chuck: provide maximum impact and shock durability.
  • Milwaukee brushless motor: optimized for efficiency, this motor delivers more run-time and longer life.
  • Compact design: provides excellent balance and control, ideal for overhead applications or work in tight spaces.
  • Chuck type: 1/2 in. metal ratcheting single sleeve.
  • Includes: 2902-20 hammer drill driver, 2850-20 impact driver, 1 M18 compact REDLITHIUM 2.0 Ah battery (48-11-1815), 1 M18 REDLITHIUM 4.0 Ah XC extended capacity battery (48-11-1840), 1 M18 and M12 multi-voltage charger (48-59-1812), 1 belt clip, 1 contractor bag, M18 HACKZALL reciprocating saw (2625-20).
Check Stock

Milwaukee M18 2850-20 18-Volt 1/4-Inch Brushless Impact Driver - Bare Tool (Renewed)

  • Compact design: provides excellent balance and control, ideal for overhead applications or work in tight spaces.
  • Milwaukee brushless motor: optimized for efficiency, this motor delivers more run-time and longer life.
  • Includes: 2850-20 M18 1/4 in. Hex impact driver bare tool.
  • Bare Tool Battery and charger not included.
Check Stock

Milwaukee Inkzall Point Markers, Fine, Black (8)

  • 8-Pack Milwaukee Inkzall Point Markers, Fine, Black.
  • The Milwaukee Inkzall Point Markers have clog resistant tips. Milwaukee Inkzall Point Markers write on dusty, wet and oily surfaces and is optimized for rough surfaces such as OSB, cinderblock and concrete..
  • The Milwaukee Inkzall Point Markers have a hard hat clip that attaches for easy access..
  • The Milwaukee Inkzall Point Markers have a quick dry time with reduced smearing and marking..
  • The Milwaukee Inkzall Point Markers are fine point markers with black, permanent, non-toxic, ink..
Check Stock

M12™ FUEL™ SURGE™ 1/4 in. Hex Hydraulic Driver 2 Battery Kit

  • ...bs of Torque and 0-400/0-1,500 RPM. New ergonomic handle design for increased comfort. Metal Ratcheting Chuck for maximum durability. The onboard LED light and fuel gauge help you increase productivity and avoid interruptions..
  • ▲M12 1/4 in. Hex Impact Driver (2462-20)▲ Milwaukee Impact Mechanism delivers 1,000 in-lbs of torque. 0-2,500 RPM for increased fastening speed. New ergonomic handle design for increased comfort. On-board battery fuel gauge displays remaining run time..
  • ▲M12 Hackzall Recip Saw (2420-20)▲ Only 11" and 2.2 lbs. for cutting in tight spaces. Variable Speed Trigger for increased user control. Accepts both HACKZALL and SAWZALL style blades. Keyless QUIK-LOK Blade Clamp allows for quick and easy blade changes. Battery Fuel Gauge displays remaining run-time. Built-In LED Light illuminates work surface..
  • ▲M12 3/8 in. Ratchet (2457-20)▲ Powerful 12-volt motor: Delivers up to 35 ft-lbs of torque. Superior fastening speed: Produces 250 RPM, with variable-speed trigger for greater control. Built-in LED light: Illuminates work surfaces in dark locations. ▲M12 LED Worklight (49-24-0146)▲ 100 Lu....
Check Stock