Top Mini Humbucker 2 - BuyWiseBest.com

FLEOR High Output Pickup Dual Hot Rail Humbucker Pickups Ceramic Electric Guitar Pickup Humbucker, Black

Hot rail dual blade humbucker pickup, compatible with electric guitar which can be installed humbucker pickup..
Magnet: ceramic, pole piece: 57mm steel rail..
Resistance: Total is 14-15k ohms, single coil pickup is 7-8K ohms..
output line: one 4 cores cable can be switched to single..
The humbukcer pickup come with screws and springs, easy to install..

Please note these are pickup frame mounting screws, but not pickup height screws.
The thread diameter is about 2.5mm and total length is about 18mm.
Quality mounting screws for most humbucker pickups rings.
Package Includes: 50x Humbucker Pickup Ring Mounting Screws.

Great for neck or middle position use in combination with a humbucker For use in any position in Strat* configurations Wiring: Standard 4-conductor Magnet: Alnico 5 Output: 90mV DC resistance: 14.97K *Strat is a registered trademark of Fender..
It was the first humbucking Strat replacement pickup we made, in the early 1980s.
Perfect for use in neck or middle position for guitars with a humbucker in the bridge, or in any position in a classic Strat* configuration.
Works well through high-gain racks and preamps.
Eric Johnson found that wiring an HS-2 for single coil operation produces an incredible vintage tone.

Fits Squier Mustang HH style electric guitar, like Bullet series. If you use it for other Mustang style guitar, you may need a modification for line up.
9 mounting screw holes and round corner HH pickup routing (Humbucker-Humbucker).
Plastic made, 2.0-2.2mm (0.08-0.09 inch) thickness.
Pure aluminum foil shielding on the back switch position and double layers protective films on the front.
Package included: 1 piece guitar pickguard.

SH-16 59Custom Hybrid Humbucker Pickup Zebra Bridge.
"The SH-16 59Custom Hybrid is a medium output, gritty sounding humbucker that sparkles with upper midrange harmonic content.
The brainchild of Seymour Duncan's incredibly knowledgeable forum members, this humbucker is the result of experimental coil swapping in order to push into new tonal territory.
The mismatched coils, and the Alnico 5 bar magnet keep the low end nice and tight, and give the mids a grind that is perfect for hard rock and metal.
Plenty of crunch and bite on top as well.

Fits American/Mexican Fender standard HH Stratocaster modern style electric guitar. If you use it for other Strat style guitar, you may need a modification for line up.
11 mounting screw holes and round corner HH pickup routing (Humbucker-Humbucker).
Plastic made, 2.0-2.2mm (0.08-0.09 inch) thickness.
Pure aluminum foil shielding on the back and double layers protective films on the front.
Package included: 1 piece guitar pickguard.

DiMarzio set out to make a pickup with the sound of the late 1950s humbuckers without simply imitating them with Alnico 2 or aged Alnico 5 magnets.
Airbucker technology was created to capture all of the best sonic qualities of vintage humbuckers while avoiding the technical problems.
The Air Classic has the same sweet sound as a classic humbucker, but Airbucker technology uses more reliable full-strength Alnico 5 magnets and still reduces string-pull to increase sustain and sensitivity.
The result is an almost vocal, three-dimensional sound that jumps off the string faster and stays true as it sustains.

A great template to help you create accurately and perfectly shaped Humbucker cavities in the pickguard or guitar body.
The template for pickguard is only for open style Humbucker Pickups, but not for Sealed/Closed style Humbucker Pickups.
Accurate measuring lines and cutouts make routing a lot easier.
Clear routing templates allow you to see the guitar body underneath.
Simply align the template's laser etched centerlines with the markings on your guitar to get placement right every time.
An appropriate thickness means you can get good contact betweeb the router bearing and the template without using shims.

A great template to help you create accurately and perfectly shaped Humbucker cavities in the pickguard or guitar body.
The template for pickguard is only for open style Humbucker Pickups, but not for Sealed/Closed style Humbucker Pickups.
Accurate measuring lines and cutouts make routing a lot easier.
Clear routing templates allow you to see the guitar body underneath.
Simply align the template's laser etched centerlines with the markings on your guitar to get placement right every time.
An appropriate thickness means you can get good contact betweeb the router bearing and the template without using shims.

From clean country to heavy levels of amp gain.
The DiMarzio DP240 Vintage Minibucker Mini Humbucker Neck Pickup is all about clarity, dynamics and lots of sparkle.
In a word, the Vintage Minbucker has chime.
It excels at clean country sounds, but it also shines with heavy levels of amp gain because it doesn't get muddy with a distorted amp.
The Vinage Minibucker Neck model performs equally well with crystal-clean amps or extreme overdrive.

Tones Features: Strong and powerful , as if like emotive tiny grains of sand are surrounding the edge of the tone. It works well for old styled hard-rock, punk, and old styled heavy metal rock..
Magnet: Alnico 2 humbucker pickup, 6 non-adjustable slug pole pieces & 6 adjustable screws pole pieces..
Resistance: 7-8k. Position: Neck pickup. Pole Spacing: 50mm..
Fully wax potted and sealed to eliminate any unwanted feedback and noise..
The neck humbucker come with screws and springs, easy to install..