Top Mini Motherboard

RackSolutions Wall Mount for Dell OptiPlex 3040 and Inspiron 3252 SFF PCs with VESA Mouting

  • Mini 6 Pin to SATA: Mini 6 Pin port plugs into the motherboard (NOTE: It is mini 6 pin port, not standard 6 pin port.), SATA port plugs into the hard drive.
  • Connectors: Connector A: ATX 12V mini 6 pin, Connector B: SATA Port (compatible with the equipment with sata port such as: liquid CPU cooler, mechanical hhd and ssd).
  • Compatibility:Compatible with DELL Inspiron series such as: 3653 3650 3655 3250 3252 3268 3660 3667 3668 3670 V3668.
  • ( Note: Do Not support the DELL OptiPlex series such as 3020 3046 5040 7020 7040 9020 SFF T1700.
  • Quality: 18AWG with braided sleeves, Length(including connectors): 15 inches(38cm).
  • 『Note』This cable was only designed for some types of DELL Inspiron series as listed. If you connect it with other incompatible motherboards, it will burn or damage the motherboard and we won’t take any responsibility for wrongly using or installing. Please carefully check the compatible types or contact us if you are not sure about it.
Check Stock

SilverStone Technology Ultra Compact Mini-ITX Computer Case with Mesh Front Panel Black SST-SG13B-USA

  • Support standard-length expansion cards (10 5 inches).
  • Mini-dtx/Mini-ITX motherboard & ATX PSU compatible.
  • Support 120mm or 140mm single fan all-in-one liquid cooler.
  • Elevated standoff for motherboard back side components.
Check Stock

MakerFocus Raspberry Pi 3 Case Protective Case, Raspberry Pi 3.5 inch Display Case, with Mini Cooling Fan for Raspberry Pi 3B, 3B+,2B,2B+ Compatible with Raspberry Pi GPIO 3.5 inch Display

  • Installation instructions video: Please get the link from the product description below. PLZ NOTE: ★This case is not compatible with 3.5 Inch HDMI TFT LCD Display, It is designed to RPI 3.5 Inch GPIO Display, ★The 3.5 inch screen is not included!!!.
  • Dual-use: You can use it only on the Raspberry Pi motherboard, or use it on the Raspberry Pi motherboard and Raspberry Pi 3.5inch display,Then decide whether to cover the its cover. (Note: The Raspberry Pi motherboard and Raspberry Pi 3.5inch display are not included!!!).
  • Can install mini cooling fan: The case when used without the display screen, you can install mini cooling fan, Snap-in installation, the cooling fan was included in packaging..
  • With GPIO open position: There is a GPIO open position on this case cover,when you use it only with Raspberry Pi motherboard, it can easy to pull up and insert the GPIO pins, don't need to open the cover. This case is easy to install and has good ventilation..
  • With cable guide hole: It reserved cable guide hole for the camera, more convenient to use with camera.
Check Stock

COMeap 24 Pin Female to Mini 24 Pin Male ATX Main Power Adapter Cable for DELL Optiplex 380 580 760 780 960 980 3.94-inch(10cm)

  • 『24P – mini 24P』24 Pin end to plug into the standard 24 pin ATX Power Supply, mini 24 Pin end to plug into DELL motherboard.
  • 『Solution』Allowing you to convert standard 24 pin ATX power supply to mini 24 pin power supply connector.
  • 『Parameter』Gauge: 1007-20AWG (standard tin-coating copper wire), Length: 3.94inches(10cm), Maximum power: 1000 watts, Quantity: 1pcs, Self-adhesive tape*1pcs.
  • 『Compatibility』Compatible with DELL Optiplex 380 / 580 / 760 / 780 / 960 / 980.
  • 『Note』Work on Dell Optiplex power supply / MB( May not work on optiplex 980 MT/SMT ( mini tower or small mini tower ) series as it uses a different power supply set up.). If you connect it with other incompatible motherboards, it will burn or damage the motherboard and we won’t take any responsibility for wrongly using or installing. Please carefully check the compatible types or contact us if you are not sure about it.
Check Stock

Mini Desktop Computer Case, Mini HTPC Case Home Theater Computer Case ITX Computer Case, Quiet, Compatible with Mini‑ITX 17X17cm Motherboard, 2.5‑Inch Notebook Hard Drive

  • 【SUPERIOR PERFORMANCE】The Mini Home Theater Computer Case Uses Anodic Oxidation Sand Blasting Process, Which Bring Outstanding Texture. Meanwhile, The Mini HTPC Case Is Made Of High Class Aluminum Alloy Materials, Which Possess High Heat Dissipation..
  • 【COMPATIBLE】The Mini HTPC Case Can Be Used With Mini‑ITX 17X17CM Motherboard, The Whole Machine Runs Without Noise, You Can Enjoys Peace Every Day..
  • 【FIT FOR 】The ITX Mini Motherboard Desktop Computer Case High Heat Dissipation Type Is Compatible With 2.5‑Inch Notebook Hard Drive, Practical And Convenient..
  • 【APPLICATION】The Mini Desktop Computer Case Is Suitable For Living Room Computers, Hotel Computers, Digital Signage, Advertising Machines, Self‑Service Terminals, Etc..
  • 【100% WARRANTY】We Promises Every Customer A 100% Shopping Satisfaction, Feel Free To Reach Us If You Have Any Questions About Your Purchase.We Will Give You A Professional And Detailed Reply Within 24 Hours.Click To Buy Now!.
Check Stock

Silverstone Tek Mini-DTX Mini-ITX Small Form Factor Computer Case with Faux Aluminum Front Panel Cases SG13B-Q

  • Support standard-length expansion cards (10.5 inches).
  • Mini-DTX / Mini-ITX motherboard & ATX PSU compatible.
  • Support 120mm or 140mm single fan All-in-One Liquid Cooler.
  • Elevated standoff for motherboard back side components.
Check Stock

WiFi Card, Mini PCI-E Wireless Card, Network Bluetooth Card for 7260HMW, Dual Band Wireless Card for Intels AC Half Mini Pcie Card

  • Lightweight and Portable: Size Specification:Half Height.
  • Half-Height Card Height: Approx. 2.6cm/1.02in.
  • Half-Height Card Width: Approx. 3cm/1.2in, the compact size make it easy to carry.
  • Efficient Transmission: This mini WIFI wireless card has 2.4Ghz and 5Ghz dual-band, and the transmission rate of this wireless network card can reach 300Mbps.
  • Applicable Notebook Models: This wireless network card is half of the mini PCI-E card, it is suitable for laptops with a mini PCI-E motherboard.
  • Compatible: The mini WIFI card is compatible for ASUS, for M5G Z77, for Gigabyte, for ASRock Z77 Desktop Motherboard With MINI PCI-E Specification, for DELL, for Toshiba, for ASUS and other Brand New Notebook Models Can be Used.
  • Ideal Accessory: This wireless network card provides an excellent solution for your daily online activities, such as transferring files, browsing the Internet, and downloading music.
Check Stock

TeamProfitcom Dual Mini 6 Pin to 8 Pin PCI Express Video Card Power Adapter Braided Sleeved Cable for Mac Pro Tower/Power Mac G5 15-inches

  • Connector 1: standard GPU 8 Pin male . PCIe 8 pin male end to plug into the video graphics card - photo #2.
  • Connector 2 : 2x mini 6 pin male ( not standard 6 pin male) !!! Dual mini 6 pin male end to plug into the Mac motherboard (NOTE: the end is mini 6 pin, not stanard 6 pin size) !!! - photo #3, photo #4.
  • Compatible with Power Mac G5 and all Mac Pro Models including: (1,1) - (5,1) or (2006) - (2012).
  • Connects a PCIe video graphics card with GPU 8 pin port to Mac motherboard with mini 6 pin port.
  • This cable was only designed for Mac Pro models as listed in the 2nd Point !!! Please check your PC type or contact us if you are not sure about it..
Check Stock

Mini SAS Cable with SATA Power, CableCreation Internal Mini SAS 36 Pin to 4 x 29 Pin Cord with SATA Power, SFF-8087 to SFF-8482 Cable, 3.3 FT

  • Please note that this Mini SAS (SFF-8643) to 4x SATA Cable, SFF-8643 is host , connect to the motherboard or RAID Controller with Mini SAS ports. 4x7Pin SATA is the target , connect to the hard drives with SATA port.
  • Before you buy this cable , please make sure the Mini SAS (SFF-8643) on your motherboard or RAID Controller. If the Mini SAS (SFF-8643) on your backplane, this cable will not work with them.
  • SFF-8643: the new connector uses less PCB real estate and allows higher port density for internal hosts and devices. Hybrid versions of these new cables will allow for a smooth transition from 6Gb to 12Gb.
  • Serial Attached SCSI (SAS) is a high-speed data storage interface designed for high-throughput and fast data access.
Check Stock

RGEEK Top Cover with Holes Aluminum Mini ITX Computer Case PC Case HTPC

  • Motherboard: Support Mini itx motherboard(17cm*17cm).
  • Material:Aluminum(Thickness 3.5mm)​​.
Check Stock

RGEEK Top Cover with Holes, Aluminum Mini ITX Computer Case PC Case HTPC

  • Motherboard: Support Mini itx motherboard(17cm*17cm).
  • Fan: Support 1*5010 fan, Material:Aluminum(Thickness 3.5mm)​​.
Check Stock

MUSETEX MATX (Micro-ATX) PC Case with 2pcs ARGB Fans Type-C Port USB 3.0 Airflow Mid Tower Mesh Front Panel Tempered Glass Side Door Mini ITX Computer Gaming Cases (Y3-N2-BW)

  • ...agement strips with dedicated routing allow you to build a durable and beautiful computer host..
  • [Addressable ARGB FANS] 2pcs 120mm ARGB fans are pre-installed to provide beautiful lighting and excellent airflow. The color of the fans can be controlled by the LED buttons on the I/O panel as well as by connecting the motherboard for software control..
  • [ Perfect Capacity ] Mesh PC case is effortless to install 3 x 2.5" SSD.
  • Motherboard Compatibility: Micro-ATX/ Mini-ITX.
  • [MUSETEX Y3 Series] Motherboard Compatibility: Micro-ATX and Mini-ITX. Not for ATX motherboard..
Check Stock