Top Mini Sata

Cable Matters Internal Mini SAS to SATA Cable 3.3 Feet (SFF-8087 to SATA Forward Breakout)

  • Internal Mini SAS data cable connects a RAID or PCIe controller with an SFF-8087 port to 4 discrete SATA drives.
  • Mini SAS to SATA adapter provides reliable internal connectivity between a Serial attached SCSI controller card in a computer system and direct attached storage devices with a SATA connector.
  • Leverage hardware raid performance with this SATA multi-lane cable.
  • Two cables can connect up to 8 SATA drives to span RAID controller arrays and share performance across two PCIe 2.0 x8 lanes with compatible host bus adapters.
  • Supports up to 6Gbs data transfer rate per drive.
  • DIY or pro installers both appreciate the convenience of a forward fan-out cable with an internal mSAS connector when expanding storage needs.
  • 3 foot cable harness of SAS to SATA cable provides sufficient length for internal cable management.
  • Slim ribbon cables minimize airflow impact in a computer case.
  • Flexible design of SAS breakout cable includes acetate cloth tape over slim ribbon cables for strain relief to protect cables without rigidity.
  • Woven mesh sheath covers half of the cable for easy routing.
  • P1 to P4 markers provide easy ID after installation.
  • Low profile SATA connectors have easy-grip treads with stainless steel latches to prevent accidental disconnection and reduce ....
Check Stock

ANNNWZZD Internal Mini SAS Cable,SFF8087 36 Pin to SFF8087 36Pin Data Cable,Mini-SAS to Mini-SAS Cable (3FT/1M)

  • 【Kindly Reminder】Please note: this cable can ❌ Not work with SAS Driver. Internal Mini SAS 36pin SFF-8087 to (4) 29pin SFF-8482 connectors with SATA Power.
  • 【Mini SAS to SAS Cable】Mini SAS 36 pin (SFF-8087) connect to the controller, 4 x SAS connect to the HDD (Hard Disc Driver).
  • 【36 Pin to 29 Pin Cable】Mini SAS 36 pin is Host, 4 x SAS 29 pin is target, Internal mini Serial Attached SCSI x 4 (SFF-8087) to (4) x1 (SFF-8482) Serial Attached SCSI (controller based) fan-out cables.
  • 【Controller to SATA Disks】Connecting a SAS controller (SFF-8087) to four SATA disks (SFF-8482).
  • 【What You Get】1 x 3.3 FT CableCreation SFF-8087 to SFF-8482 Cable. Backed with 24 Months Warranty and lifetime technical service.
Check Stock

Genuine Dell K340R, 9RD1W 255W Power Supply PSU For Optiplex 980 Small Mini Tower SMT Systems Compatible Part Numbers: K340R, 9RD1W, Compatible Model Numbers: L255EM-01, F255E-00

  • Seamless, integrated design, Input: 100-240V, Output: 255 Max..
  • Connectors: P1 – 24-Pin Mini ATX Power Connector, P2 – 4-Pin ATX Power Connector, P3 – SATA Power, P5 – SATA Power, P7 – 4-Pin Floppy Drive Power Connector, P8 – SATA Power, P9 – SATA Power.
  • Make sure this fits by entering your model number..
  • Genuine Dell K340R, 9RD1W 255W Power Supply PSU For Optiplex 980 Small Mini Tower SMT Systems.
  • Compatible Systems: Optiplex 980 Small Mini Tower SMT.
Check Stock

GeeekPi Raspberry Pi Mini Tower NAS Kit, Raspberry Pi ICE Tower Cooler with PWM RGB Fan, M.2 SATA SSD Expansion Board, GPIO 1 to 2 Expansion Board for Raspberry Pi 4 Model B

  • This Raspberry Pi Mini Tower NAS kit contains an M.2 SATA SSD expansion board which can expand the mass storage for your Raspberry Pi. The case is made of ABS material,This kit turns your Raspberry Pi into a mobile mini-host..
  • NOTE: The RGB light on Fan and mood light will not light up unless installed driver, and OLED will not display any information untill you have enabled it !!! Please read the manual carefully and follow the steps to enable it.Please purchase M.2 SATA SSD 2280 mass storage device, It dose NOT support NVME SSD!!!.
  • M.2 SATA SSD 2280/2260/2240 mass storage adapter board,supports up to 2TB M2. SATA SSD solid-state drive.
  • Package Includes: 1 x ABS Mini Tower Case,1 x ICE-Tower CPU Cooling Fan,2 x Acrylic Side Panel,1 x 0.96inch OLED Display (Already mounted on the case ),1 x GPIO Edge expansion board,1 x M.2 SATA SSD Shield,1 x Assembly manual(Note: Raspberry Pi 4B is Not included in the package).
Check Stock

Cablecc USB 3.0 to SATA 22pin 2.5 Hard Disk to 2 in 1 Combo Mini PCI- E 2 Lane M.2 NGFF & mSATA SSD Adapter Converter

  • USB 3.0 to SATA 22pin 2.5" Hard Disk to 2 in 1 Combo Mini PCI- E 2 Lane M.2 NGFF and mSATA SSD Adapter Converter.
  • The item included one cable and one PCBA..
  • Build in Mini PCI-e 52pin Female connector.
  • Build in M.2 (NGFF) B key Female connector.
  • Insert both M.2 and mSATA SSD on the PCBA,M.2 SSD is the first priority.mSATA won't work. Support SATA Reversion 3.2.
  • PCI Express M.2 Spec.Revision 0.7, Version 1.0 PCI Express Mini Card Electromechanical Spec.1.2 PWM synchronous buck converter Power IC 3A maximum output current Short circuit protection In-rush current suppression Thermal shutdown protection ESD HBM (Human Body Mode)/2KV Note: The adapter only work for B-key or B/M-key socket, cannot work for M-key socket..
Check Stock

COMeap (3-Pack) Motherboard ATX 4 Pin to SATA Hard Drive HDD Power Adapter Cable for Lenovo 12-inch(30cm)

  • 『4P - SATA』4 Pin port plugs into Lenovo motherboard (NOTE: It is standard 4 pin port, not mini 4 pin port.), SATA port plugs into the hard drive.
  • 『Connectors』Connector A: ATX 12V 4 pin(NOTE: not mini 4 pin. Please refer to the image 3rd for 4 pin port's dimension), Connector B: SATA (compatible with the equipment with sata port such as: liquid CPU cooler, mechanical hhd and ssd).
  • 『Compatibility』Compatible with Lenovo motherboard with standard 4 pin port including: Q77 Q75 E450 E350 D510 (NOTE: It only works with standard 4 pin port, not mini 4 pin port.).
  • 『Parameter』Gauge: 18AWG with braided sleeves for easy cable management, Length(including connectors): 12 inches(30cm), Quantity: 3 pieces, Self-adhesive tape*1pcs.
  • 『Note』This cable was only designed for Lenovo motherboard with standard 4 pin port as listed. If you use other incompatible brand motherboards or types, it will definitely burn or damage the motherboard or hard driver and we won’t take any responsibility for wrongly using or installing. Please carefully check the compatible types or contac....
Check Stock

ROIPETK Mini 4-Pin to 2X Right Angle SATA Hard Drive Power Adapter Cable for Motherboard SATA Hard Drive Power Cable 18" (2Pack)

  • Connector 1: ATX 12V mini 4-pin connector..
  • Connector 2: 2 right-angle SATA 15-pin connectors..
  • Usage: The mini 4-pin connector plugs into the motherboard and the right-angle 15-pin SATA connector plugs into the hard drive..
  • Compatibility: This cable is compatible with motherboards with mini 4-pin ports (compatible with devices with SATA connectors, such as liquid CPU coolers, mechanical hard drives and SSDs), including. m410 m415 m510 m510s m510a m610 m710 b415 b250, thinkcentre m720 tower, st50 Server.
  • Specification. Length: 18 inches (46 cm).
Check Stock

CableCreation [Reversed Cable] Mini SAS 36Pin (SFF-8087) Male to 4 SATA 7Pin Female Cable, Mini SAS (Target) to 4 SATA (Host) Cable, 0.5M, 1.6 Feet

  • Mini SAS 36 (SFF-8087) Male is host, 4x SATA female is target.
  • Mini SAS 36pin SFF-8087 Male connect to the controller, 4x7pin SATA connect to the backplane..
  • Serial Attached SCSI (SAS) is a high-speed data storage interface designed for high-throughput and fast data access..
  • SAS forward breakout cable P1 to P4 markers provide easy recognized after installation.
  • Gold-plated SATA port ensure strong and secure connection..
  • Mini SAS fast data transfer cable will allow for a smooth transition from 6Gb to 12Gb..
Check Stock

Mini SAS Cable with SATA Power, CableCreation Internal Mini SAS 36 Pin to 4 x 29 Pin Cord with SATA Power, SFF-8087 to SFF-8482 Cable, 3.3 FT

  • Please note that this Mini SAS (SFF-8643) to 4x SATA Cable, SFF-8643 is host , connect to the motherboard or RAID Controller with Mini SAS ports. 4x7Pin SATA is the target , connect to the hard drives with SATA port.
  • Before you buy this cable , please make sure the Mini SAS (SFF-8643) on your motherboard or RAID Controller. If the Mini SAS (SFF-8643) on your backplane, this cable will not work with them.
  • SFF-8643: the new connector uses less PCB real estate and allows higher port density for internal hosts and devices. Hybrid versions of these new cables will allow for a smooth transition from 6Gb to 12Gb.
  • Serial Attached SCSI (SAS) is a high-speed data storage interface designed for high-throughput and fast data access.
Check Stock

GeeekPi Raspberry Pi Mini Tower NAS Kit, Raspberry Pi ICE Tower Cooler with PWM RGB Fan, M.2 SATA SSD Expansion Board, GPIO 1 to 2 Expansion Board, 18W QC3.0 Power Supply for Raspberry Pi 4 Model B

  • This Raspberry Pi Mini Tower NAS kit contains an M.2 SATA SSD expansion board which can expand the mass storage for your Raspberry Pi. The case is made of ABS material,This kit turns your Raspberry Pi into a mobile mini-host..
  • NOTE: The RGB light on Fan and mood light will not light up unless installed driver, and OLED will not display any information untill you have enabled it !!! Please read the manual carefully and follow the steps to enable it.Please purchase M.2 SATA SSD 2280 mass storage device, It dose NOT support NVME SSD!!!.
  • The 0.96 inch OLED screen was already mounted on the case.28x64pixels, default I2C address: 0x3C.
  • M.2 SATA SSD 2280/2260/2240 mass storage adapter board,supports up to 2TB M2. SATA SSD solid-state drive.
  • Package Includes: 1 x ABS Mini Tower Case,1 x ICE-Tower CPU Cooling Fan,2 x Acrylic Side Panel,1 x 0.96inch OLED Display (Already mounted on the case ),1 x GPIO Edge expansion board,1 x M.2 SATA SSD Shield,1 x QC 3.0 Power supply,1 x Assembly manual(Note: Raspberry Pi 4B is Not included in the package).
Check Stock

NFHK 2 in 1 Combo Mini PCI- E 2 Lane M.2 NGFF & mSATA SSD to SATA 3.0 III Adapter Converter PCBA

  • 2 in 1 Combo Mini PCI- E 2 Lane M.2 NGFF & mSATA SSD to SATA 3.0 III Adapter Converter PCBA, 2.5" SATA SSD Form Factor : 98 x 65.5mm.
  • M.2 (NGFF) & mSATA to SATA III Module, Build in Mini PCI-e 52pin Female connector, Build in M.2 (NGFF) B key Female connector, Insert both M.2 & mSATA....
  • PCI Express M.2 Spec. Revision 0.7, Version 1.0, PCI Express Mini Card Electromechanical Spec. 1.2, PWM synchronous buck converter Power IC.
  • 3A maximum output current, Short circuit protection, In-rush current suppression, Thermal shutdown protection, ESD HBM (Human Body Mode)/2KV.
  • the MSATA and NGFF SSD cannot work at same time. The adapter only work for B-key or B/M-key socket NGFF SSD, cannot work for M-key socket..
Check Stock

zdyCGTime 8-Inch 4 Pin Floppy Drive to 15 Pin SATA Male Power Cable(2-Pack)

  • It converts a SATA Power 15pin connector into a 4pin Mini power connector.
  • Power connector for Devices requiring a Mini connection.
Check Stock