Top Mini Toggle

Twidec/8Pcs Mini Toggle Switch SPST 2 Position 2 Pins ON/Off AC 125V 5A AC 3A 250V with Pre-soldered Wires MTS-101-X

  • Rated Voltage & Current : 5A 125V AC 2A 250V AC.
  • Pre-wired design:Easy to install, and saves unnecessary cost. Wire length: 200mm/ 8".
  • Body size : 3.3 x 1.2 x1.3cm/1.3" x 0.48" x 0.51"(L*W*T).
  • package content: 8 x mini Toggle switches.
Check Stock

mxuteuk 8pcs 6 Pin 2 Position DPDT Mini Miniature Toggle Switch ON/ON Switch for Car Dash Dashboard 5A 125V 2A 250V MTS-202

  • Package Content : 8Pcs x DPDT Mini Miniature Toggle Switch.
  • Total Size(Approx) : 13 x 12 x 32mm/0.5" x 0.45" x1.3"(L*W*H).
  • The product has a 2-year warranty service；Mechanical life: more than 50.000 cycles. Electrical life: more than 10, 000 cycles.
  • Miniature toggle switches suitable for panel mounting with a reliable action making them suitable for a wide range of applications..
Check Stock

Rowin LEF-324 Plexion Distortion Guitar Effect Pedal with Bright / Normal Mode True Bypass for Guitar Bass

  • 【Classic Plexion Distortion】It is a modelling pedal which mirrors the original Plexi amps.Three knobs control the Gain,Tone and Volume.Toggle switch toggle between Bright and Normal sounds.
  • 【2 WORKING MODES】:Normal and bright. Using the Bright channel allows you to enter into classic rock to late 80s and early 90s rock territory depending on just how much gain you wish to apply. The Normal channel is by no means average by any stretch of the imagination, just adjust the gain, tone and volume dials to get the desired output and you will be amazed by its rich, full-bodied output that sounds just as good clean as it doesn’t heavily distorted.
  • 【SOLID CONSTRUCTION】Made of high-quality zinc alloy, durable and sturdy.
  • 【TRUE BYPASS】True bypass provide transparent tone.LED indicator shows the working state.
  • 【MINI SIZE】Small and exquisite,can save a lot of space on pedal board.
Check Stock

Rowin plexion guitar pedal for Guitar & Bass with Bright and Normal Mode True Bypass

  • 【Classic Plexion Distortion】It is a modelling pedal which mirrors the original Plexi amps.Three knobs control the Gain,Tone and Volume.Toggle switch toggle between Bright and Normal sounds.
  • 【2 WORKING MODES】:Normal and bright. Using the Bright channel allows you to enter into classic rock to late 80s and early 90s rock territory depending on just how much gain you wish to apply. The Normal channel is by no means average by any stretch of the imagination, just adjust the gain, tone and volume dials to get the desired output and you will be amazed by its rich, full-bodied output that sounds just as good clean as it doesn’t heavily distorted.
  • 【SOLID CONSTRUCTION】Made of high-quality zinc alloy, durable and sturdy.
  • 【TRUE BYPASS】True bypass provide transparent tone.LED indicator shows the working state.
  • 【MINI SIZE】Small and exquisite,can save a lot of space on pedal board. Package Includes a Rowin Plexion Pedal, a user manual. Power supply DC 9V adapter is not included.
Check Stock

Toggle Jewelry Clasps Necklace Toggle Clasp Silver Toggle Clasps for Jewelry Making 130 Set

  • Packing Quantity : 130 set jewelry toggle necklace kit , expect count may be +/- 5%. Size :12X9mm /15X5mm.
  • Jewelry clasp toggle closure for bracelet making, clasp jewelry for necklaces making, end clasps for jewelry, toggle jewelry clasps.Bracelet clasps and closures.
  • Small toggle clasps for jewelry making "Pewter" (zinc-based alloy) . Tibetan clasps jewelry Lead Free & Cadmium Free & Nickel Free findings for jewelry making. Non-tarnishing Metal Alloy toggle clasps for jewelry making..
  • Toggle clasps jewelry supplies, jewelry closure handcraft works , necklace bracelet jewelry clasps for kids , decorative accessories, etc..
  • DIY clasp toggle, brass toggles for jewelry making, beading clasps and closures, jewelry findings toggle clasps, jewelry clasps for necklaces.
Check Stock

DaierTek 12 Volt 50 Amp Heavy Duty Toggle Switch 12V ON Off IP65 Waterproof Switch 2 Pin with Rubber Boot Cover Black Amber Red Blue -2pcs

  • 【Waterproof Toggle Switch】The toggle switch with rubber boot covered to be IP65 waterproof, 4 colors of covers (black, amber, red, blue) for your choose..
  • 【50 Amp Toggle Switch 12 Volt】50A 12V Heavy Duty toggle switch with screw terminals..
  • 【Aluminum Housing】The whole housing of this toggle switch is made of Aluminum, Durable enough. And the switch with 12mm panel mounting hole Dia..
  • 【ON OFF Toggle Switch】The toggle switch is 2 Pin SPST (Single Pole Single Throw) Version, Easy to toggle ON/OFF..
  • 【Application】 It's widely used as Automotive Replacement Toggle Switch, Fit for most Car, RV, ATV, UTV, Truck, Automotive, Marine, Boat and other electric equipments..
Check Stock

mxuteuk 8pcs SPST Mini Toggle Switch Miniature ON/Off Switch 2 Terminal 2 Position 6A 125V 3A 250V for DIY Car Dash Dashboard Electronic Equipment MTS-101

  • Package Content: 8Pcs x SPST Mini Miniature Toggle Switch.
  • 2 terminals made of high quality industrial materials, Wear-resistant and durable, very easy to be soldered.
  • Every nut and thread are meticulously crafted.
  • Total Size(Approx) : 13 x 7 x 32mm/0.5" x 0.3" x1.3"(L*W*H).
  • The product has a 2-year warranty service；Mechanical life: more than 50.000 cycles. Electrical life: more than 10, 000 cycles.
  • Miniature toggle switches suitable for panel mounting with a reliable action making them suitable for a wide range of applications, such as DIY Car Dash Dashboard Electronic equipment Toy etc..
Check Stock

MXR Carbon Copy Mini Analog Delay Effects Pedal (M299)

  • Mini Analog Delay Pedal with 600ms Delay Time.
Check Stock

Cable Matters 10-Pack Single-Gang Toggle Switch Wall Plate (Wall Switch Cover) in White

  • 1 gang toggle switch wall plate cover provides a new or replacement toggle switch cover in the home or office.
  • Single light switch toggle wall plate provides a professional-looking installation.
  • Contemporary design of this toggle faceplate cover provides a clean look for an upgrade in the kitchen, dining room, or living room.
  • Smooth finish on the wallplates is easy to clean and includes matching painted screws.
  • Sturdy single gang toggle light switch plate covers fit a standard-sized single-gang receptacle.
  • Toggle light switch cover installs easily with the included mounting screws.
  • Cost effective 10 pack of light plate covers which provides enough faceplate covers for a small renovation project at home or work.
  • Toggle switch compatible to pair with a single pole toggle light switch in a standard-sized outlet box.
Check Stock

Joinfworld Marine Toggle Switch 12V DC 30A Waterproof Toggle Switch 250V AC 15A Heavy Duty with Weatherproof Boot Cover SPST ON/Off 2 Pin for Auto Car Truck Boat -4Pcs

  • ON/OFF Toggle Switch: This is an SPST toggle switch, 2 pin switch, 2 position design. When turn the switch ON, it will stay at ON position until manually switch it off..
  • 15A 250V AC, heavy duty toggle switch 12v design..
  • Mounting Hole Size: The mounting hole size of this 12 volt toggle switch is 12mm (0.47 inch)..
  • Feature: 12v toggle switch with screw terminal. There is a gap on this 2 position toggle switch to fix the ON/OFF plate and prevent the plate from spinning on the switch. In addition, for becoming waterproof toggle switch 12v marine, this 2 way switch will come with a toggle switch cover..
  • Waterproof: The marine toggle rocker switch can reach IP65 waterproof rating after installing the rubber boot cover, suitable for automotive, car, truck, boat, yacht, DIY projects, household appliances, etc..
Check Stock

MXR M290 Mini Phase 95 Phaser Effects Pedal for Electric Guitar included 2 x Senor Path Cable and Instrument Cable

  • MXR has combined two of the most used phaser pedals ever made in the MXR Mini Phase 95 pedal Phaser effects pedal for electric guitar.
  • The original Phase 90 pedal was a four-stage phaser that practically defined the phaser sound for electric guitar, and the Phase 45 that followed was a two-stage phaser that delivered a smoother sound that blended better with certain music styles.
  • You get both flavors in the MXR Mini Phase 95 pedal, switchable with the 45/90 toggle switch.
  • The "Script" switch toggles feedback in the effect, providing a pronounced sweep when on and a lusher, more subdued sound when off.
  • Many guitarists choose MXR phasers for their pedalboards, and the MXR Mini Phase 95 pedal offers two iconic phaser effects in a single road-worthy stompbox guitar pedal guitar pedals pedal guitar pedal for guitar guitar multi effects unit.
Check Stock

pimsle Old Fashioned Light Toggle Switch with Wooden Wall Plate Walnut 01 Gold

  • ◆ Easy to install: Step-by-step instructions to guide you through the wiring process. (Package includes: gold toggle switch, plate cover, wire, heat shrink tubing, screw, connector ).
  • ◆ Toggle switch single pole (1-Way) electrical light switch, rating 15A 250V AC/ Perfect for unique interior!.
  • ◆ Toggle switch set is made of high-quality materials, including a well-made wooden cover. Antique gold-colored toggle switch fits a modern style..
  • ◆ Toggle On/Off switch makes an exciting clicking sound and provides a satisfying experience. The unique toggle switch's modern stylish appearance enhances your room while maintaining function..
  • ◆ Suitable for houses, condos, apartments and most commercial areas that require only 15A switches such as offices, schools, stores, shops, restaurants, public facilities, and hotels..
Check Stock