Top Mini itx Board

Cooler Master RC-130-KKN1 Elite 130 - Mini-ITX Computer Case with Mesh Front Panel and Water Cooling Support

• Meshed front panel for increased intake of ambient cool air.
• Supports Mini-ITX motherboards for small profile builds.
• Unique HDD/SSD mounting bracket positioning allows more space inside.
• Supports 120 mm water cooling kit at the front of the case.
• Supports 120 mm water cooling kit at the front of the case thanks to HDD/SSD mounting style.
• Supports standard ATX PS2 sized power supplies.

Segotep Slath Mini ITX PC Gaming Computer Case Double Curved Tempered Glass Side Panel GPU Vertical Mounting Cable Management System SFX PSU Supported Slath Mini

• Double curved tempered glass panel, IMAX borderless field of view, graphics card can be seen on three sides..
• Designed for MINI ITX graphic card, MAX GPU length is 200mm..
• Supports Mini ITX motherboard, SFX PSU and 240mm radiator..
• High efficiency cooling design, 2 x 120mm reverse cooling fan which installed in bottom of the case, 240mm water cooling supported on the rear and special power supply cooling holes..
• Great cable management, hidden cables design on the top, magnetic washable dust-proof net..

Thermaltake CA-1Q9-00S1WN-00 S100 Tempered Glass Black Edition Micro-ATX Mini-Tower Computer Case with 120mm Rear Fan Pre-Installed

• Supports M ATX and Mini ITX Form Factor Motherboards. Motherboards 6.7” x 6.7” (Mini ITX) , 9.6” x 9.6” (Micro ATX).
• Designed for use in either a vertical or horizontal orientation on the motherboard.
• Chamber concept design with optimized cable management space for small form factor builds.
• Stackable and flexible thermal solution. Remarkable expansion. Advance ventilation.
• 2x USB 3.0, 1x Headphone, 1x Mic Front Ports, Internal Bay: 3x 3.5 inches or 2.5 inches.

Thermaltake Core V21 SPCC Micro ATX Mini ITX Cube Gaming Computer Case Chassis Small Form Factor Builds 200mm Front Fan Pre-installed CA-1D5-00S1WN-00 Black

• Supports M ATX and Mini ITX Form Factor Motherboards. Motherboards 6.7” x 6.7” (Mini ITX) , 9.6” x 9.6” (Micro ATX).
• Designed for use in either a vertical or horizontal orientation on the motherboard.
• Chamber concept design with optimized cable management space for small form factor builds.
• Stackable and flexible thermal solution. Remarkable expansion. Advance ventilation.
• 2x USB 3.0, 1x Headphone, 1x Mic Front Ports, Internal Bay: 3x 3.5 inches or 2.5 inches.

Iesooy DC 12V 250W 24Pin Pico ATX Switch Pico PSU Auto Mini ITX High Power Supply Module ITX

• Product introduction: 250 Watt Output 12 Volt DC Input,Fanless design, 100% silent,24 pin ATX connector, Plugs directly into the ATX connector,Perfect DC PSU for mini ITX Motherboards.
• Working operation: Input voltage: +12V/DC(11.4-12.6V), DC input: 2.5mm inner diameters, 5.5mm outer diameter, Input Current: Max. 21A, Output Power: 250W, Power Efficiency: >= 85%, Working temperature/humidity: 15℃ to 35℃ / 45%-75%, Reposition temperature//humidity: -40℃ to +70℃/ 10%-90%, Atmospheric pressure: 86Kpa—106Kpa.
• Strong durability: Adopt industrial solid capacitor, ideal for being used in harsh evironment, High performance with high heat-stand feature, more reliable, Solid Polymer Caps on the PCBA, Long life.
• Wide range of applications: MINI computers, one computer, POS, digital set-top boxes, ITX chassis, network servers, advertising, banking terminals, etc.
• Package includes: 1 x DC-ATX 250W Module (with cable).

KEDIERS PC Case - ATX Tower Tempered Glass Gaming Computer Case with 9 ARGB Fans,C590

• [9 Pre-Installed 120mm ARGB Fans]-- Suitable for enhanced cooling. With the pre-installed ARGB controller you can sync it with the motherboard, each addressable ARGB fan offers 16.8 million colors for exceptional customizable lighting. You don't need to pay extra for fans. Only when the 5V-3PIN cable on the control board is connected to the motherboard can the ARGB light synchronization be realized..
• [2 Tempered glass]-- C590 gaming case is equipped 2 * 4mm thick tempered glass, which can clearly see the RGB lighting and the components in the building, Creating a good gaming atmosphere..
• [I/O Panel]-- 2 x USB3.0 Port, 1 x Type C, 1 x HD Audio, Reset Button, Power Button..
• [Cable Management]-- Back Bays: 3x 3.5'' HDD's and 3 x 2.5'' SSD's. Removable storage cable box.
• [Remarkable Expansion]-- C590 Mid Tower Gaming Computer Case supports ATX/Micro-ATX/Mini-ITX motherboards..

8dBi WiFi Antenna RP-SMA Male Wireless Network 2.4GHz 5.8GHz Dual Band with U.FL/IPEX to RP-SMA Female Pigtail Cable for Mini PCIe Card Wireless Routers, PC Desktop, Repeater, FPV UAV Drone, PS4-2PCS

• High quality, high effective Increases the range of your wireless device, connector type: IPEX MHF4 to RP-SMA Female,Length: 15cm/5.9”..
• 8dBi WiFi antenna omni-directional is with 2.4GHz and 5.8GHz dual band, high gain and can extend wireless range to dead spot..
• WiFi RP-SMA male antenna is used high quality circuit board which ensures maximum and stable signal quality. Easy to install and increase signal strength..
• Dual band wifi antenna works with most wireless devices, such as Mini PCIe Wireless Card Routers / Repeater / Range Extender / Desktop PC / Mini ITX Build / PCI Card / FPV UAV Drone / PS4 Build. o make your desktop great increased work performance..
• This U.FL Antenna is only Used for MINI PCI-E interrface, Do Not Use for M.2 (NGFF) Interface, please check your connectors before purchasing..

2 x 8dBi WiFi RP-SMA Male Antenna 2.4GHz 5.8GHz Dual Band +2 x 15CM U.FL/IPEX to RP-SMA Female Pigtail Cable for Mini PCIe Card Wireless Routers, PC Desktop, Repeater, FPV UAV Drone and PS4 Build

• OMNI-DIRECTIONAL WIFI ANTENNA- This 8dBi omni-directional is with 2.4GHz and 5.8GHz dual band, high gain and can extend wireless range to dead spot.
• PIGTAIL SPECIFICATIONS- Connector type: IPEX MHF4 to RP-SMA Female,Length: 15cm/5.9”.
• STABLE SIGNAL TRANSFER- The WIFI antenna is used high quality circuit board which ensures maximum and stable signal quality. Easy to install and increase signal strength.
• WORK WITH- This wireless antenna works with most wireless devices, such as Mini PCIe Wireless Card Routers / Repeater / Range Extender / Desktop PC / Mini ITX Build / PCI Card / FPV UAV Drone / PS4 Build. WARM NOTICE: this wireless router antenna only use for MINI PCI-E Interface, Do Not Use for M.2 (NGFF) Interface, please check your connectors before purchasing.
• PACKAGE INCLUDES- 2X 8dBi WIFI antenna+ 2X 15CM U.FL/ IPEX to RP-SMA Female Pigtail Cable.

Lian Li O11 Dynamic mini Snow White Mini Tower Computer Case - O11D MINI-S

2 x 8dBi 2.4GHz 5GHz 5.8GHz Dual Band WiFi RP-SMA Male Antenna+2 x 35CM U.FL/IPEX to RP SMA Female Pigtail Cable for Mini PCIe Card Wireless Routers PC Repeater Desktop FPV UAV Drone PS4 Build

• High gain WIFI antenna- This 8dBi Omni-directional antenna with dual band 2.4GHz / 5.8GHz and RP-SMA Male connector which reduces interference, extend wireless range to dead spot.
• Pigtail Specifications- Coming with 2 pieces connector cables,Length: 35cm including the connectors.
• Connector type: U.fl / IPEX (MHF2) to RP-SMA Female.
• High quality- The WIFI antenna case is made of hard plastic, sturdy and durable. The internal is using high quality circuit board ensures maximum and stable signal quality.
• Multi-use- This wireless antenna works with most wireless devices, such as Mini PCIe Wireless Card Routers / Repeater / Range Extender / Desktop PC / Mini ITX Build / PCI Card / FPV UAV Drone / PS4 Build. WARM NOTICE: this wireless router antenna only use for MINI PCI-E Interface, Do Not Use for M.2 (NGFF) Interface, please check your connectors before buying.
• Easy to install- This wireless wifi antenna is easy to install, Simply replace current antenna to increase signal strength.

A4 Compact ITX PC Case A50 G5 K55 SFX Computer Case Aluminum Mini-ITX Small Computer Case Test Bench Mini Computer Host Tempered Acrylic Side Panel B2

• Size:312 x 245 x 140 mm(12.28 x 9.64 x 5.5 inch),small ITX computer case.
• Suitable for ITX motherboard(170 x 170 mm).
• 2 mute fans on the top of the PC case,extremely strong heat dissipation function.
• Package including:1 x mini computere case.

EDIY ITX Mini A4 Computer Case 7.5L Aluminum Mini-ITX Motherboard Small PC Case Test Bench Support SFX Power Supply 300mm Vedio Card Transparent Acrylic Side Panel

• Size:308 x 190 x 128 mm(12.12 x 7.48 x 5.04 inch),extremely small ITX computer case.
• Suitable for ITX motherboard(170 x 170 mm).
• Compatible with 300mm long dual graphics card, 2.5 inch SSD hard disk..
• Support SFX power supply,the height limit of CPU fan is 60mm.
• Package include:1 set of mini Computer Case.