Top Mini6hf Ant Swr Antenna Analyzer

Super Antenna MP1LXMAX Deluxe Tripod 80m-10m HF +2m VHF Portable Antenna with Go Bags ham Radio Amateur

  • ...taneous 2 meters (144 to 148 MHz) with a good SWR. Continuously tunes all frequencies Marine, Government, NGO, CAP, MARS, EmComm, Shortwave, CB, and everything in between. TUNING METHOD: Antenna tunes by calibrated manual slip of the SuperSlider Coil grip, with no need for external power, separate antenna tuner, or analyzer..
  • Perfect for vacation, field days, and backyard. PACKAGE CONTENTS: MP1C Super Antenna + MC2 SuperPlexer 2 meter adapter + SW1 Titanium SuperWhip + TM4 Large Deluxe Tripod + UM3 SuperMount + SP3 SuperSpike + MC80 Coil + MC60 Coil + FG1 SWR Ruler + GB2 Go Bag + GB4 Go Bag + Includes All Necessary Radial Sets: MR4010, MR8075, MR6060, MR642, MR2Y. Everything collapses down to pack into the stealth black Go Bag zip cases, with internal velcro pockets..
  • SIZE: Total extended height 12 feet (3.7m). Antenna Collapsed Size: 12″ (30cm). Tripod Collapsed Size: 25″ (64cm). Go Bag Size: 13″x9″x3.5″ (33x23x9cm). Power Rating: 500W SSB, 300W CW/DATA. EFFICIENCY: Within 1dB of a full size quarter-wave vertical antenna on 20 meters (as measured by HFpack Shootout). COMPATIBILITY: Fully compatible with all Amateur Radio transceivers. CONNECTOR: SO-239 (PL259 compatible 50 ohms). FILLED ANTENNA GO BAG: 4.8 pounds (2kg) FILLED TRIPOD GO BAG: ....
Check Stock

RG58A/U PL-259 Coax Cable Jumper for HAM & CB Radio, Antenna Analyzer, Dummy Load, SWR Meter, 3 Foot

  • 3 Ft. RG58A/U Coax Cable with PL-259 Connectors..
  • Great For CB, Antennas, Antenna Analyzer, Dummy load, Radio Scanner, Ham Radio Transceiver, SWR METER,CB Radio Handheld & Amateur Radio Equipment..
Check Stock

Super Antenna MP1DXMAX Low Profile Tripod 80m-10m HF +2m VHF Portable Antenna with Go Bag ham Radio Amateur

  • ... MHz) with a good SWR. Continuously tunes all frequencies Marine, Government, NGO, CAP, MARS, EmComm, Shortwave, CB, MURS, Weather, FM, Scanner, and everything in between. TUNING METHOD: Antenna tunes by calibrated manual slip of the SuperSlider Coil grip, with no need for external power, separate antenna tuner, or analyzer..
  • FEATURES: Includes new UM2 SuperMount with NVIS SuperTilt. Dual Band HF + plus 2 meters, with MC2 SuperPlexer 2 meter adapter. Durable SuperWhip, indestructible Titanium metal alloy, so flexible it can be rolled up in an 12″ circle and stowed in the GB2 Super Go Bag. The TM1 Low Profile Tripod sets up on any flat surface. The UM2 SuperMount clamps to most surfaces, fences, ladders, tables, benches, railings, or attaches with included U-bolt to any 1.25″ pipe, post, or balcony railing..
Check Stock

RG8x Coaxial Cable 50 ft, CB Radio Antenna Coax Cable UHF PL259 Male to Male Low Loss CB 50 Ohm Ullnosoo for HAM Radio, Antenna Analyzer, Dummy Load, SWR Meter

  • This CB coax cable is used for CB ham radio, antenna analyzer, tuner, switch, monitor, dummy load and SWR meter, it is also great for Jeep Wrangler CB installation..
  • The 50ft CB antenna cable has UHF PL-259 male to male plug, nickel-plated connectors which are fully molded. The outer material of RG8x coax cable is made of waterproof PVC jacket which can be used in harsh outdoor environments..
  • The braid shield is made of 128x0.12mm aluminum wire which made this jumper cable is really low loss and maximum protect the signal during the transmission..
  • Low loss low SWR, better than RG58, RG8x coax cable has 17AWG thicker pure copper inner conductor, is a step up from standard RG-58 coaxial cable and is recommended for high-powered applications or users who simply want the best coax possible..
  • We offer worry-free warranty and friendly customer service within 12 months for your confident purchase. If you are not satisfied with any product, please don’t hesitate to contact us, we will serve you our best..
Check Stock

944 / 944 Turbo Shirt

  • Cross Needle and Digital SWR/WATT Meters : Lighted Cross-Needle and digital meters lets you accurately read SWR, forward and reflected power at a....
  • Backlit LCD Display : An easy-to-read backlit LCD displays SWR, forward/reflected power, frequency, antenna 1/2, L/C tuner values, on/off indicators....
  • Remote Control Port : Plug in the MFJ-993RC remote control and put your tuner at your antenna or elsewhere and control it remotely. The MFJ-993....
  • Tune Any Antenna : You can tune any antenna — dipoles, verticals, beams, phased arrays, inverted vees, quads, random wires, mobile antennas, compact....
Check Stock

SUPERBAT 2-Pack SMA Cable Extension, SMA Male to SMA Male Right Angle Connector Cable RG316 Coax Jumper, 12\ for Antenna Router WiFi Cable Network Analyzer etc.

  • Type: sma to sma coax cable connector right angle | Cable type: low loss RG316 coaxial cable, Length: 12 inches (30cm) | sma male connector.
  • Short and flexible coaxial cable |This versatile cable features a Right-Angle connector, which offers a more natural fit at the device connection point and helps prevent unnecessary strain and damage to the port..
  • The sma right angle coax cable is good for Antennas, FPV Drone, LTE hotspot, gateway, sma radio, Antenna Analyzer, 4g lte antenna sma, router, USB Tuner, RTL SDR dongle, SWR meter, Wireless LAN Devices, WiFi antenna, Radios External Antenna,etc..
  • Package: 2pcs SMA Male to SMA Male right angle cable.
  • 【Service Guarantee】Never worry about any security problems. We are confident in the quality of our sma cable and willing to provide 1 MONTHS Replacement Warranty and 100% Satisfaction Guarantee. If you unfortunately get a defective one, please contact our customer support..
Check Stock

onelinkmore BNC to UHF Antenna Adapter BNC Female to UHF Male PL259 Connector Coaxial BNC UHF Radio Adapter for Antennas LAN Device Radios Mobile Kenwood Radio Amateur Scanner SWL Operator Pack of 2

  • Application for BNC Antennas, Wireless LAN Devices , Coaxial cable, Wi-Fi Radios External Antenna,Can be used for connecting a BNC male cable to SO-239 jack female such as a radio or an antenna.
  • This UHF to BNC adapter provide a simple way to put the SWR meter with SO239 Ports in-line in your car without changing your setup.
  • Compatible with Vehicle CB Radio Amaterur Radio Ham Radio Marine VHF Radio Antenna Analyzer.
  • Package Content : 2 x BNC to UHF Connector RF Adapter.
Check Stock

Super Antenna MP1C All Band HF VHF Ham Radio Portable MP1

  • MP1 Super Antenna Ham Radio Portable Antenna for HF - VHF. For Indoor or Outside field use. Big signal in a small package. The #1 HF Portable Vertical....
  • THIS IS ONLY AN ANTENNA. DOES NOT INCLUDE MOUNT or Coaxial Cable. The Super Antenna MP1C Antenna with FG1 Frequency Guide SWR Ruler. Mount Not....
  • ANTENNA FREQUENCY RANGE: 40m-30m-20m-17m-15m-12m-10m-6m-2m-220 Ham bands. HF 7MHz-30MHz continuous all bands shortwave and VHF 30MHz to 300MHz all....
  • CONTENTS: 1 Super Slider Coil. 1 Telescopic Whip. 2 Extension Rods with Coupling nut. 1 SWR Ruler. INCLUDES SWR RULER: The FG1 Frequency Guide....
  • POWER RATING: 500 Watts SSB (300W CW/Data). COLOR: Black and Metallic. WEIGHT: 1 pound (0.5kg). FITTINGS: This antenna has a 3/8"-24 male fitting at....
Check Stock

Holland Electronics FBA_144823 Flat Coaxial Type F Jumper Cable for Windows and Doors (1)

  • This CB coax cable is used for CB ham radio, antenna analyzer, tuner, switch, monitor, dummy load and SWR meter, it is also great for Jeep Wrangler CB installation..
  • The 2ft CB antenna cable has UHF PL-259 male to male plug, nickel-plated connectors which are fully molded..
  • The braid shield is made of 128x0.12mm aluminum wire which made this jumper cable is really low loss and maximum protect the signal during the transmission..
  • Better than RG58, RG8x coax cable has 17AWG thicker pure copper inner conductor, is a step up from standard RG-58 coaxial cable and is recommended for high-powered applications or users who simply want the best coax possible..
  • Come with 2-Pack. We offer worry-free warranty and friendly customer service within 12 months for your confident purchase. If you are not satisfied with any product, please don’t hesitate to contact us, we will serve you our best..
Check Stock

uxcell UHF Male PL-259 to UHF Male PL-259 Low Loss RG213 Coax Jumper Cable 0.3Meter/1Ft

  • RG213 low-loss coax cable with UHF PL-259 Male to UHF PL-259 Male connectors.
  • With nickel plated connector body and gold plated brass contacts.
  • Soldered PL-259 connector on both ends, Perfect For CB, Amateur Ham Radio & 2 Way Radio Hookups..
  • Used for Antennas, Antenna Analyzer,dummy load, Radio Scanner, Ham Radio Transceiver, SWR METER, CB Radio Handheld & Amateur Radio Equipment..
  • Package Includes: 1 x UHF Male PL-259 to UHF Male PL-259 Coax Cable.
Check Stock

Eightwood UHF PL259 Male to BNC Male Cable RG58 Coax 3 Feet for CB Radio, Ham & Amateur Radio, SWR Meter

  • Connectors made from brass, plated with nickel for mechanical durability and solid connection.
  • High performance flexible RG58 coax cable.
  • Application: CB Radio, Handheld & Amateur Radio, Ham Radio Transceiver, Radio Scanner, Antenna Analyzer, SWR Meter, etc.
  • Package includes: 1pc PL-259 to BNC jumper cable, heat shrink on both ends.
Check Stock

45W HF Power Amplifier For YASEU FT-817 ICOM IC-703 IC-705 Elecraft KX3 QRP Ham

  • hf power amplifier，for QRP transceiver， Improve signal。Can be used both as a base and mobileunit,Extremely Small Compact and lightweight ， Full integration with the FT-817 using the supplied interface cable, The amplifier incorporates various protection circuits such as high VOLTAGE，front mounted LED display..
  • This amplifier can be successfully used with other QRP rigs such as the ICOM IC-703(and Elecraft KX3)..
  • YAESU FT-817ND Quick operating manual: 1. Connect power cord to DC power supplier, Red to "+", Black to" -" 2. Connect ACC cable to FT-817 ACC and amp 3. Adjustment “BAND ADJ” button， Select the band..
  • 4. Connect antenna to amp "ANT" and "input" from FT-817 antenna out. Notice! The antenna you used that should well tuned, the SWR should less than 1:1.5 5. Open the power on both power supplier and AMP. The power indicate on. 6. Power on FT-817, the band indicate on Amp shoule be on..
  • 7. Press PTT, the TX indicate on Amp should be on.Notice! If working on FM or SSTV for long operating time, should lower the output power on FT-817, say 2.5W or 1W..
Check Stock