Top Mining Cap Lamp

Gooseneck Led Light, Led Machine Light, Clamp gooseneck Light 900 Lumen 120 Volt Fixed with C Clamp Industrial Lighting Work Lamp for Machine Tools and Lathe

  • 【Aluminum alloy lamp cap】 The led work light cap has an aluminum alloy lamp cap with heat dissipation line design. It is a work lamp with excellent heat dissipation, rust prevention, wear resistance and impact resistance. The lamp cap contains convenient button switch..
  • 【Quality LED Lamp The gooseneck LED bulb integrates 3 LED beads and has a luminous flux of about 900 lumens. Compared with halogen bulbs, it has higher luminous efficiency and brightness, lower heat generation and power consumption. Built-in wide voltage device can be connected to the voltage range of 110V to 220V..
  • 【Double Gooseneck Lamp】 The machine light hose is a corrosion-resistant and anti-oxidation double-layer design of outer plastic and inner metal. It is about 20 inches in length and can be bent freely at any angle, facing the place you need..
  • 【Metal C Clamp】The industrial-strength C-clip is made of metal. You can clamp it on the edge of a table or a machine. Can clamp up to 55mm (2.2inch).
  • 【48 months quality assurance】 Support 48 months quality assurance, XINYIQI take full responsibility....
Check Stock

UFOND 10000 Lumen Work Light with Stand, Detachable Double Headed LED Work Light, Indoor and Outdoor Waterproof Working Lamp，Adjustable Metal Telescoping Tripod with Power Cord

  • INDEPENDENT SWITCH: Each work light has a waterproof switch on the back, which can be single or double lamp lighting. Each lamp cap has a brightness of 5000 lumens and 5000K flash white..
  • POWERFUL LIGHT SOURCE- Compared with traditional halogen bulbs, LED work lights can achieve higher brightness at lower power cost and heat. Each lamp cap has 84 high-efficiency AC-SMD, super bright 5000K cold white light, as bright as sunlight..
  • FLEXIBLE & ADJUSTABLE - The telescopic tripod can be extended from 33 to 70 inches. Each lamp heads can be rotated 360 ° horizontally and tilted 270 ° vertically to adjust the required lighting angle.Double head work lamp with handle can be removed and used separately without tripod. The flexibility of UFOND work light is applicable to any project in various occasions..
  • HIGH QUALITY - Die cast aluminum housing helps to dissipate heat better and make use safer. Tempered glass lens and sealing switch ensure the tightness of lamp cap and prevent dust and water.With white frosted lamp pole, the work lamp is beautiful and durable..
  • 2 YEAR WARRANTY - We are very confident in our products, please feel free to contact us if you have any problem with our LED work light, we'd like to provide service for you..
Check Stock

Hunting Friends Mining Light KL2.8LM Rechargeable LED Headlamp Waterproof Explosion-proof Miners Headlamps Flashlight Camping Lights for Night Running Fishing Hunting (Red)

  • ✔Two Use Options: The mining headlamp can hang on the hard hat, it also can wear on the head with a head band. Smart size and light weight, easy to use..
  • ✔1+6 LED Light Source: 1 main LED + 6 auxiliary LED light source, high quality led can be used for more than 10W hours, which eliminates the trouble of replacing the lamp. Two light modes (High/Low), it can meet the different brightness needs..
  • ✔Rechargeable& Intelligent: Built in 2800mA rechargeable battery with overcharge and over-discharge protection devices, thus, it’s very safety and reliable. The charge time about 8 hours, the lighting time high mode more than 13 hours and Low mode more than 26hours..
  • ✔Explosive-proof & Waterproof: it’s suitable for professional works and outdoor activities, like coal miners, tunnel project, oil field, construction site, night fishing, hiking, camping, caving, hunting and repair etc..
  • ✔What You Will Get? 1* Mining headlamp (2800mA battery included). 1* Head band. 1* Battery charger. 1* Manual 1* Retail package..
Check Stock

VTRETU GPU Mining Rig， Ethereum Classic Crypto Miner ，with 8 GPU Mining Motherboard and 2000W Power Supply（110-264V） 8 Cooling Fans ，SSD,RAM，CPU,Windows 10(Excluding GPU) White

  • 【VTRETU Complete Crypto Mining Rig 】: the mining case is made of high-quality steel material that is sturdy and durable. It can fully protect the GPU and electronic devices from damage. designed for cryptocurrency mining –Monero, Ethereum,ETC, Ripple, Zerocoin, Litecoin ，Dogecoin ，etc. NOTE: GPU cards which are longer than 12.6 inches / 32cm in length are UNAVAILABLE for this mining rig.
  • 【Adapt to universal voltage 】: Inbuilt 2000W Quiet power is designed for mining rigs with up to 90% conversion efficiency. 110V – 264V universal AC input design， supports 8 GPU to work at the same time， allows you to enjoy mining without any adjustment. It can work at a household voltage of 110V save your power consumption at the same time.
  • 【8 GPU Mining Motherboard】: Intel-B75 mining motherboard.The 65mm distance gives the GPU enough space for air circulation and prevents the GPU from overheating.The size of case fits most video cards.(Except 3060,need dedicated motherboard).
  • 【8 Powerful Fans 】 : This mining rig case is equipped 8*4500rpm cooling fan, 4 (Air in) + 4 (Air out),so it can accelerate air convection to keep the graphics card running at high performance. And with wind speed regulator, can reduce the temperature of the mainboard an....
Check Stock

VTRETU Ethereum GPU Mining Rig with 8 GPU Mining Motherboard and 2000W Power Supply110-264V 8 Cooling Fans for Crypto Mining Rig Complete ETH Miner (Excluding GPU), black (V01)

  • ?VTRETU Complete Crypto Mining Rig ?: the mining case is made of high-quality steel material that is sturdy and durable. It can fully protect the GPU and electronic devices from damage. designed for cryptocurrency mining -Monero, Ethereum, Ripple, Zerocoin, Litecoin ,Dogecoin ,etc. NOTE: GPU cards which are longer than 12.6 inches / 32cm in length are UNAVAILABLE for this mining rig.
  • ?Adapt to universal voltage ?: Inbuilt 2000W Quiet power is designed for mining rigs with up to 90 percent conversion efficiency. 110V - 264V universal AC input design, supports 8 GPU to work at the same time, allows you to enjoy mining without any adjustment. It can work at a household voltage of 110V save your power consumption at the same time.
  • ?8 GPU Mining Motherboard?: Intel-B75 mining motherboard.The 65mm distance gives the GPU enough space for air circulation and prevents the GPU from overheating.The size of case fits most video cards.(Except 3060,need dedicated motherboard).
  • ?8 Powerful Fans ? : This mining rig case is equipped 8 x 4500rpm cooling fan, so it can accelerate air convection to keep the graphics card running at high performance. And with wind speed regulator, can reduce the temperature of the mainboard and GPU working environment effectively.
Check Stock

Hunting friends Safety Mining Headlamp Coal Miner Headlight Explosion Rroof Mining Light Led Waterproof Lamp BK2000 Rechargeable Coal Flashlight for Helmet Hard Hat Hunting Fishing (Yellow)

  • ✔Two Use Options: The mining headlamp can hang on the hard hat, it also can wear on the head with a head band. Smart size and light weight, easy to use..
  • ✔1+6 LED Light Source: 1 main LED + 6 auxiliary LED light source, high quality led can be used for more than 10W hours, which eliminates the trouble of replacing the lamp. Two light modes (High/Low), it can meet the different brightness needs..
  • ✔Rechargeable& Intelligent: Built in 2400mA rechargeable battery with overcharge and over-discharge protection devices, thus, it’s very safety and reliable. The charge time about 5 hours, the lighting time high mode more than 13 hours and Low mode more than 26hours..
  • ✔Explosive-proof & Waterproof: it’s suitable for professional works and outdoor activities, like coal miners, tunnel project, oil field, construction site, night fishing, hiking, camping, caving, hunting and repair etc..
  • ✔What You Will Get? 1* Mining headlamp (2400mA battery included). 1* Head band. 1* Battery charger. 1* Manual 1* Retail package..
Check Stock

Mining Rig Frame - 6 GPU, Steel Open Air Crypto Mining Frame Rig Case with Switch Cable & Gloves, Support Long & Short Size GPU, for ETH/ETC/ZEC/BTC/Bitcoin/Ethereum/Dogecoin (6GPU)

  • PROFESSIONAL MINING RIG FRAME: 6/8 GPU Mining Rig Frame, crypto mining frame for ETH/ETC/ZEC/BTC/DOGE. Used to protect GPU and electronic equipment, can keep all cables clean and organized, along with everything in your mining machine..
  • COMPATIBLE SUPPORT: The Crypto Mining Frame support 6~8 graphics cards, supports all standard ATX/BTX/FLEX/ITX/MicroATX motherboards, supports the largest motherboard size 305*245mm.
  • supports 1 ATX power supply(Supports up to 260mm length), supports 4*12CM fans, support 1 HDD+2 SSD installation positions..
  • EASY INSTALLATION: The Open Air Mining Frame has precise screw holes and easy installation. You can quickly complete the layout of the Mining Rig. Product size 19.7x11.2x8.9inch (50x28.5x22.5cm)..
  • RUGGED AND DURABLE: The mining rig case is made of thickened 1.0mm steel plate. It is durable that can use for many years. Fully Protecting Your GPU and Electronic Device. Open Air Mine Frame Design + 6 Graphics card spacing 81.28mm(8 Graphics card spacing 60.96mm) bring you the ultimate heat dissipation performance..
  • IMPROVEMENTS & UPGRADE: We learned that the first generation of products has the defect of weak support for short graphics cards. Now, we're rolling out our new Mining Rig Frame! The addition of the middle s....
Check Stock

5in1 15Ft (5Pack 3Ft) Neon Strip Light Wire, Ourbest 3Mode Stay/Slow/Fast Flash EL Wire Lights Battery Pack for Cosplay Dress Halloween Christmas Party Decoration(Red)

  • Suitable for most Off-road, for jeep or other vehicles, ATV, SUV, mining, boat, Excavators, truck, tractor and other heavy equipments.
  • Perfect for skiing race teams on boats, for camping at night and in competition use Car Light Offroad Work Light Bar fot Jeeb Car Styling Driving Lamp Flush Mount External Light Truck Tractor.
  • The work light is one type of off-road product, and it can be widely used in the most difficult and demanding working environments all over the world..
  • This work light was produced with strictly standard. All the test procedure ensures that this light can work at the situation like darkness, vibration, shock, dust and humidity. This product can be used in machines and vehicles within the SUV, truck, RV, mining, playground, warehouse, construction, forestry, agricultural, material handling and, trailer & emergency industries..
  • This product provides 30000hours long working Color Temperature:6000K lifespan and more brightness but less power consumption.
Check Stock

8 Pieces Lamp Finial Knob Lamp Accessories 1/2 Inch Tall Lamp Finials Plated Steel Finials Tapped 1/4-27 for Lamp Harp Tops (Gold, Silver)

  • Size details: the stamped steel lamp finials are 1/2 inch in height and threaded 1/4-27 to fit lamp harp tops.
  • The package comes with 8 pieces finials for lamps to meet your daily needs and replacements.
  • Various colors are available: finials for lamp shades are designed classic color, which look bright and pretty, and can be matched according to your preferences.
  • Lamp topper knobs are made of quality metal material and polished in bright brass color to prevent tarnishing.
  • Simple to use: no need to use other tools, this decorative lamp finial is easy to use.
  • After installing the lampshade, you only need to screw it to the top of the lamp holder.
  • Suitable for most standard desk lamps or floor lamps.
  • Wide occasions: the lamp accessories knob is not only artistic but also practical, fitting well for your stand up lamp, project lamp, fornlamps, vintage table lamp in your home, living room, book room, dorm and office, adding much appeal and character to your space.
  • Simple and retro design: lamp shade screw cap features with modern and retro color and appearance, which will not be outdated.
  • The finial cap knob lamp is nice gift choice for holiday, birthday, anniversary, wedding, housewarming, retirement any holidays, sending your care and love.
Check Stock

Blue Orchards Mining Fun Deluxe Party Packs for 16 Guests! Mining Birthday Party Decorations Gamer Birthday Decorations for Boys Construction Theme Birthday Party Pixel Gaming Party Decorations

  • [EVERYTHING YOU NEED] Our exciting Mining Fun Deluxe Party Pack has all the party basics you’ll need to complement your little one's pixel mining....
  • [FOR 16 GUESTS]This Mining Fun Deluxe Party Pack includes 16 9-inch paper dinner plates, 16 7-inch paper dessert plates, 20 paper lunch napkins, 16....
  • [PARENTS LOVE] Parents will love having everything for their little one’s mining celebration all together in one easy mining package! Craft your way....
  • [MAKE MEMORIES] Grab your Mining party favors and make lasting memories and breathe easy with this adorable, all-inclusive party pack picked....
  • [HAVE FUN] Bring your pickaxes and let your guests enjoy these Mining inspired party decorations when you decorate your big day with our amazing....
Check Stock

8 Pieces Lamp Finial Knob Lamp Accessories 1/2 Inch Tall Lamp Finials Plated Steel Finials Tapped 1/4-27 for Lamp Harp Tops (Gold, Silver, Black, Bronze)

  • Size details: the stamped steel lamp finials are 1/2 inch in height and threaded 1/4-27 to fit lamp harp tops.
  • The package comes with 8 pieces finials for lamps to meet your daily needs and replacements.
  • Various colors are available: finials for lamp shades are designed classic color, which look bright and pretty, and can be matched according to your preferences.
  • Lamp topper knobs are made of quality metal material and polished in bright brass color to prevent tarnishing.
  • Simple to use: no need to use other tools, this decorative lamp finial is easy to use.
  • After installing the lampshade, you only need to screw it to the top of the lamp holder.
  • Suitable for most standard desk lamps or floor lamps.
  • Wide occasions: the lamp accessories knob is not only artistic but also practical, fitting well for your stand up lamp, project lamp, fornlamps, vintage table lamp in your home, living room, book room, dorm and office, adding much appeal and character to your space.
  • Simple and retro design: lamp shade screw cap features with modern and retro color and appearance, which will not be outdated.
  • The finial cap knob lamp is nice gift choice for holiday, birthday, anniversary, wedding, housewarming, retirement any holidays, sending your care and love.
Check Stock

SUOHUI Complete GPU Mining Rig for Ethereum Classic ETC/ETH/RVN/Flux/Rego with 8 GPU Mining Motherboard,PSU,RAM, SSD, Open Frame Mining Machanie(ExcludingGPU/1 Layer Miner)

  • 【Preinstalled Mining hardware】Miner comes with a mining motherboard, PSU, cooling fans, 128GB SSD, 8GB RAM, CPU, and Win10 OS(not activated). Our mining rig has a complete installation that all components have passed the inspection of technicians and assembled before sending out, which can reduce the defective rate of electronic components and improve the product quality. Easy start in minutes! Note: NOT include GPUs..
  • 【Professional Mining Power Supply】 1800W full voltage power supply allows to mine at home easily. The 10 customized long-line power cables directly power mobo and each graphics card without an adapter cable, avoiding burning the card due to poor contact, providing the best security for your mining..
  • 【4*4500 RPM Silent Cooling Fans】The mining machine has 4 powerful GPU cooling fans with a fan speed controller. Controllable win speed allows accelerating airflow flexibility for optimal cooling. Equipped with the bottom plate to prevent turbulent airflow and achieve excellent efficient heat dissipation..
  • 【Stackable Open-air Mining Frame】: This mining frame is made of high-quality material, reinforcing the mobo with14 screws to protect it from being over shaped. The open-air frame ensures that the graphics card is not limited i....
Check Stock