Top Mining Equipment Machine

Block Create Unlimited Miner - Purple Edition | Crypto Miner | Play to Earn | Passive Income | Algorand Blockchain | Metaverse

  • Litecoin Miner: L3+ is a dual-coin merged miner of Litecoin & Dogecoin. Has high computing power and efficiency: 504 MH/s (expected to fluctuate +/- 5%), Power consumption 800W+10%. Dimensions 8.66 x 18.11 x 11.02 inches.
  • Durable: This Scrypt Litecoin Miner has a built-in controller, and no separate host is required for operation. The chassis is made of premium aluminum alloy material, which is integrated and durable. With dual fans and independent heat sinks, the heat dissipation effect is good.
  • Stable: This LTC Dogecoin Mining Machine has a tight industrial power interface, which can be closely contacted and fitted to ensure long-term and stable output of power.
  • Note: The power consumption efficiency of the Scrypt ASIC Litecoin Miner will vary depending on the PSU, ambient operating temperature and the accuracy of the power meter. Please be careful to avoid dust and catkins, so that the heat of the ASIC Miner cannot be dissipated.
  • Equipment Condition: Our L3+ Litecoin Mining Machine is in good condition, dust free, used but like new. We will wipe, clean and debug them before shipping to make sure they work properly. If you encounter any problems, please contact our team in time.
Check Stock

8 GPU Mining Rig Frame Case - Complete Mining Rig System for Cryptocurrency Ethereum Miner with 1800W/2800W Power Supply(176V-260V), Motherboard, CPU, RAM, SSD, 8 Adjustable Speed Fans (Without GPU)

  • 【Built in 1800W Power Supply】The mining machine system comes with 1800W (176V-260V) professional Low Decibel mining machine power supply (It will not work under 110V household voltage), the decibel is about 50dB, suitable for home use. Up to 90% power conversion efficiency, allowing you to enjoy mining and save your power consumption at the same time..
  • 【8 GPU slots】8 GPU slots in the mining rig frame case, and the 65mm gap between GPU ports makes it quieter and easier to cool. The mining case support 8 PCS 3060TI/3070/6800/6800XT 6900/6900XT GPU simultaneously. But It is recommended to run only 4 PCS 3080,3090. Note: GPU longer than 32 cm in length are unavailable..
  • 【8 Adjustable Speed Fans】The mining computer case is equipped with 8 PCS cooling fans.The design of one air volume in and one out, the air volume is sufficient and silent enjoyment, escort your graphics card. Fan controller can control the fan speed from 2500 to 4500 rpm, rotate the fan controller to the right to increase the speed..
  • 【Mining rig Including】Our 8 GPU mining rig frame includes 1800W Mining power supply, motherboard, Intel CPU, 128GB SSD, 4G RAM, 2500-4500 rpm cooling fan * 8, screws package. Note: The hard disk is not equipped with a system. After you log in to ....
Check Stock

ATX 1600W Full Modular Mining Power Supply GPU for Bitcoin Miner ETH Rig Supports 6 Graphics 80+ Gold Certified with 150CM US Plug Adapter Cable(110V)

  • This power supply is special for mining machine, in order to effectively dissipate heat, the fan speed is above 6000 RPM, so the noise is normal, if forced to choose to use in PC,there is no way to avoid this noise, PC power fan used within 2000 RPM..
  • This is a power supply specially designed for the US 110V.The modular mining power supply can be a perfect tool for your Eth Coin rig.Rated power is 1600w. DC circuit design, stable voltage output..
  • 80 PLUS Gold Certified PSU 150mm cooling Fan and Auto Fan Speed Control.150mm large fan design for optimal system cooling and maximizing performance.Compatible with quality, efficiency and stability balance, pursuing continuous real power output..
  • 1x IDE.It's better for Bitcoin GPU mining,100% Brand New and High quality - GPU:Support Up to 6 GPU(GPU is not included).
  • Using a new large-capacity large magnetic ring material, the performance is very stable. Widely used in variety of mines and high-power single 12V industrial equipment..
Check Stock

MZHOU PCI-E 1X to 16X Riser Card with M.2 to PCI-E X1 NGFF Slot NVME Adapter Card,for Bitcoin Crypto Mining Ethereum Mining（Black）

  • PCI-E 1X to 16X riser card---VER009S-PLUS version, a high-performance PCI Express riser card, which can extend the motherboard PCIE X1 slot to the PCIE X16 slot. Mainly designed for Ethereum/Bitcoin mining equipment or more GPU mining equipment..
  • The PCI-E card can be inserted into any PCI-E slot: x1, x4, x8 or x16. The USB 3.0 transfer cable can flexibly place your PCI-E devices.Plug and play..
  • M.2 NGFF to PCI-E X16 adapter card, support the M.2 NGFF slot of PCI-E channel,using this adapter card can convert the M. 2 NGFF interface into a common PCI-E X16 interface..
  • M.2 NGFF adapter card have 4 fixed holes on the board, 30mm,12mm, 19mm，21mm.Can be broken off positioning according to the length of the card slot in your machine..
  • Support System：Compatible with all WINDOWS systems, LINUX, MAC. Package contents:PCI-E 16X Main Card*1/PCI-E 1X Plug-in Card*1/24in USB 3.0 Cable*1/6PIN to 15PIN Power Cable*1/M.2 to PCI-E riser card*1/Screw*1/Screwdriver*1.
Check Stock

1/4 Classifier Sifting Pan Gold Panning Fits 5 Gallon Bucket Mesh Screen

  • OUR FRAME MINING MACHINE DOES NOT CONTAIN GPU.This rack-mounted miner is made of the highest quality iron material and is durable. Fully protect your....
  • B85 frame type mining machine, professional design, accelerate air convection, super heat dissipation design. Sufficient space is reserved between the....
  • Please note: This product does not include GPU, install win10 mining system (The system is not activated), including 1800W, with power cord (both 110V....
  • B85 frame type mining machine, including: motherboard, Intel CPU 1840/1820 (with CPU cooler), 128GB SSD, 4G RAM,PSU,win10 system（The system is not....
  • GPU Port Gap: the port gap between GPUs is 65mm, you can put 8pcs GPUs on the motherboard at the same time if your GPU thickness is less than 60mm,....
Check Stock

Antminer L3+ 504MH/S Litecoin Miner, Professional ASIC Litecoin Dogecoin Mining Machine, Scrypt Algorithm LTC Miner & Dogecoin Miner

  • Litecoin Miner: L3+ is a dual-coin merged miner of Litecoin & Dogecoin. Has high computing power and efficiency: 504 MH/s (expected to fluctuate +/- 5%), Power consumption 800W+10%. Dimensions 8.66 x 18.11 x 11.02 inches.
  • Durable: This Scrypt Litecoin Miner has a built-in controller, and no separate host is required for operation. The chassis is made of premium aluminum alloy material, which is integrated and durable. With dual fans and independent heat sinks, the heat dissipation effect is good.
  • Stable: This LTC Dogecoin Mining Machine has a tight industrial power interface, which can be closely contacted and fitted to ensure long-term and stable output of power.
  • Note: The power consumption efficiency of the Scrypt ASIC Litecoin Miner will vary depending on the PSU, ambient operating temperature and the accuracy of the power meter. Please be careful to avoid dust and catkins, so that the heat of the ASIC Miner cannot be dissipated.
  • Equipment Condition: Our L3+ Litecoin Mining Machine is in good condition, dust free, used but like new. We will wipe, clean and debug them before shipping to make sure they work properly. If you encounter any problems, please contact our team in time.
Check Stock

SENKAUTO Mining Rig Case 8 Ports GPU Mining Frame Case Mining Motherboard 8 Cooling Fans Supported(4 Preinstalled) Mining Machine System with 4GB RMA, CPU (Without GPU/PSU) (Black)

  • Support 8pcs GPUs: The mining rig case support 8 GPUs. Support ATX motherboard, built-in, external dual PSU hosting, PSU mounting, hard drive. 8 GPUs can be installed at the same time, which greatly improve the performance of the BTC/ETH/ETC mining machine case..
  • Generous Space between GPUs: The Gap between GPU ports is about 65mm, it can ensure high performance, low power consumption for mining..
  • Support 8 Cooling Fans: The mining rig case support 8 cooling fans and preinstalled with 4* 2500rpm cooling fan. 2* fan speed controller, you could adjust the fan speed according to your need. Great heat dissipation is a must for mining Bitcoin (BTC), Ethereum (ETC), and any other cryptocurrency..
  • Support ATX/1U/2U Power Supply: The mining rig frame made of highest quality steel, with the finest craftmanship, which is easy to install and has a sturdy structure. With a larger room for power supply, you can install standard ATX PSU directly without modifications. Keeps the machine perfectly organized while it holds the least amount of heat possible..
  • Mining rig case package: Including: motherboard, CPU, power switch line, 4G RAM, 2500rpm cooling fan * 4, fan speed controller*2, 6 PIN cable to (6 + 2) Pin * 8pcs, screws package. The miner machine system doesn't in....
Check Stock

Artist Unknown SE18GEN Mesh Screen Green

  • 【EASY TO USE】The new high-efficiency screening equipment has a screen moving trajectory that is approximately straight. This sieve machine has....
  • Dimensions: 117CM*56CM*56CM(46.06"*22.05"*22.05").
  • 【WORKING PRINCIPLE】The screen box relies on the vibrating motor to rotate in the opposite direction simultaneously so that the whole screen....
  • 【HIGH QUALITY】This sieve machine adopts high-performance, high-life vibration motor. Adjusting the vibration force of the vibration motor, the....
  • 【WIDE APPLICATION】It is widely used in mining, coal, electric power, metallurgy, building materials, fire resistance and other industries for....
Check Stock

MANMEI Open Air 8 GPU Mining Rig Frame for Crypto Miner Stackable Ethereum Mining Machine 1800W Power Supply 110V-264V 8 GPU Motherboard with CPU & 128GB SSD & 8G RAM & 4 Fans Without GPU

  • Mining Rig Complete System: MANMEI mining rig is designed for crypto mining – Ethereum Classic, ETH, Litecoin, Dogecoin, Monero, Zerocoin, Ripple....
  • 110 - 264V Voltage Power Supply: Built-in 1800W PSU is specially designed for mining rig with up to 90% conversion efficiency. Wide voltage range....
  • 8 GPU Ports Mining Motherboard: Specially designed B85 mining motherboard allows you to put at most 8 Pcs graphics cards in the mining rig at same....
  • Easy & Quick Installation: With prebuild design, MANMEI B85 frame type mining machine is easy and quick to assemble. Compared with other mining rig....
  • Mining Rig System Including: B85 motherboard with CPU, 1800W Supply Power (110V - 264V input ), 128GB SSD, 8G DDR3 RAM, 4 PCS 4500 RPM Adjustable....
Check Stock

BEYIMEI PCI-E 1X to 16X Riser Card, 10 Capacitors,PCI-E Riser for Bitcoin Litecoin Ethereum Mining ETH,with USB 3.0 Extension Cable, 6PIN SATA Power Cable – GPU Extender Riser Card – (V013-PRO,1 Pack)

  • √【PCI-E 1X to 16X riser card】: The high-performance V013-PRO version expands the motherboard PCI-E X1 slot into a PCI-E X16 slot. Mainly used for Ethereum mining equipment or GPU mining equipment..
  • √【10 capacitors, safer! 】: Use 10 high-quality solid capacitors to ensure stable voltage and current, making the graphics card power supply more stable and safe..
  • √ 【Temperature control display】: The default setting is “temperature” when the machine is turned on. Press once to display Fahrenheit, press twice to display voltage (12V), press and hold the switch for 5s to turn off or turn on the display and LED lights. When the temperature reaches 75 degrees, the display will flash and alarm..
  • √ 【Strong power supply】: 6PIN port power supply, making the graphics card power supply independent of the motherboard, reducing the burden on the motherboard when multiple graphics cards are connected..
  • √【Wide scope of application】: Plug and play, no need to install drivers. A 60 cm USB 3.0 cable for flexible placement of PCI-E devices, helping users to obtain more flexible GPU connections..
Check Stock

LEGO City Mining Team 60184 Building Kit (82 Piece)

  • Build a tipper truck toy with tipping bed, a rock pile mining site with breakaway elements and a research station.
  • Includes 4 mining crew figures and a glow-in-the-dark spider figure.
  • Grab your hard hat, place the dynamite in the rock slide and push the plunger to break it apart.
  • Dumper truck measures over 1″ (4cm) high, 2″ (6cm) long and 1″ (5cm) wide Rock pile measures over 1″ (4cm) high, 2″ (7cm) wide and 1″ (5cm) deep Research station measures over 1″ (5cm) high and 1″ (3cm) wide.
  • 82 pieces – Fun mining equipment building toy for boys and girls between the ages of 5 and 12 LEGO City building toys are compatible with all LEGO construction sets for creative building.
Check Stock

BEMONOC 2Pcs/Pack HTD 5M Rubber Timing Belts Closed-Loop 400mm Length 80 Teeth 15mm Width Industrial Timing Belt

  • Fiberglass Tensile Cord - High dimensional stability and maximum flexibility engineered and tested for highly wear resistant performance.
  • Nylon Tooth Cover - Durability and wear resistance, increased power capacity.
  • Timing belt efficient transmission, low noise, oil resistance, fatigue, inflexible, non-stretch, high precision, wear-resistant.
  • The belts are widely used in automotive, textile, machine tools, office machinery, power tools, household appliances, instrumentation equipment, packaging equipment machinery, mining, petroleum, chemical and so on..
Check Stock