Top Mining Pc Case

DAYLEAD Mining Rig Case 8 GPU Mining Case with Mining Motherboard Support 8 Cooling Fans(4 Preinstalled) for BTC/ETH/ZEC GPU Mining Rig (Without GPU, PSU)

  • 【8-Port Ming Rig Frame】The mining rig frame has 8 GPU ports, which means you can install 8pcs of GPUs on the motherboard at the same time. We have also tested the rig with various GPUs to ensure that it’s compatible with a wide range of graphics cards. Please note that only the same type of GPUs can be installed at the same time..
  • 【8 Cooling Fans Supported】The mining rig case support 8 cooling fans. It is equipped with 4*120mm Silent cooling fans and 2* fan speed controller. More quite, accelerating the air convection, excellent heat dissipation performance, keep the graphics card running at high performance. Add 1*80mm CPU cooling fan..
  • 【A stable machine】The 8 GPU mining rig frame is made of high-quality steel, strong, durable, and available for repeated addition, Easy to set up, It’s a stable machine that’s incredibly easy to set up and requires little maintenance, making it an ideal rig for mass scaling..
  • 【Low Consumption】The consumption of the GPU mining rig system is less than 150watt. Supports Windows10/LINUX operation system..
  • 【Kindly Note】New version of mining case MC03 suitable for most of the mining case power supplies on the market (1U, 2U, ATX). You need to purchase and install your own PSU, Hard drive, and GPU to wo....
Check Stock

8 GPU Mining Rig 68mm Slots, Crypto Ethereum Miner Frame with Barebone Motherboard for ETH/ZEC, Cryptocurrency Machine System Case with SSD/RAM (Without GPU/PSU)

  • 【Complete Mining Rig】 The miner is almost completed, The extras you need are a power supply, GPU, HDMI cable. It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc. Please ensure that all connection interfaces are in good contact to prevent the motherboard/GPU from overheating..
  • 【With 8 GPUs Motherboard】 The mining motherboard with 8 spaced expansion slots, 68 mm between each slot, allow you run 8 GPUs simultaneously. Compatible with 1660, 2070, 3080, 3090, RX580 and other series of graphics cards, But 3060 is not supported. The hash rate will be halved or even less. Note: GPUs longer than 35 cm in length are unavailable..
  • 【4 Fans Support】 The mining rig case is equipped with 4pcs 3000rpm cooling fans, which can provide airflow allowing for assistive GPU cooling..
  • 【Mining Technical Support】 Support OS/Windows, but for most graphics cards, the OS system will be relatively stable. Note: There is no system installed in the hard disk, you need to download it yourself. The mining machine is an item that requires technology. If you encounter technical trouble, please feel free to contact me and we will provide you with technical support..
  • 【Mining rig case package】 Including: motherboard, Intel CPU, 12....
Check Stock

8 GPU Mining Rig 70mm Slots with 2500W Power Supply 8 Fans Crypto Coin Miner Case with Barebone Motherboard for Ethereum Cryptocurrency Mining Frame with SSD/RAM Without GPU

  • 【Built in 2500W Power Supply】 Built in 2500W power supply with 10 PCS long power cables. No need to purchase adapter cables, connect to....
  • 【8 GPUs Support】8 GPU 70mm expansion slots in the mining computer case. For our power supply, the power efficiency is 90%, the rated power is....
  • 【8 Fans Support & Fan Controller 】The cryptocurrency mining rig case is equipped with 8 PCS cooling fans. 4 fans pull the air in and other 4 fans....
  • 【 HDMI & VGA Ports】There are HDMI port and VGA port, you can use HDMI cable or VGA cable. It is designed for cryptocurrency mining—Litecoin,....
  • 【Mining rig package】 Note: Please ensure that all connection interfaces are in good contact to prevent the motherboard/GPU/PSU from overheating.....
Check Stock

Mining Rig Frame - 6 GPU, Steel Open Air Crypto Mining Frame Rig Case with Switch Cable & Gloves, Support Long & Short Size GPU, for ETH/ETC/ZEC/BTC/Bitcoin/Ethereum/Dogecoin (6GPU)

  • PROFESSIONAL MINING RIG FRAME: 6/8 GPU Mining Rig Frame, crypto mining frame for ETH/ETC/ZEC/BTC/DOGE. Used to protect GPU and electronic equipment, can keep all cables clean and organized, along with everything in your mining machine..
  • COMPATIBLE SUPPORT: The Crypto Mining Frame support 6~8 graphics cards, supports all standard ATX/BTX/FLEX/ITX/MicroATX motherboards, supports the largest motherboard size 305*245mm.
  • supports 1 ATX power supply(Supports up to 260mm length), supports 4*12CM fans, support 1 HDD+2 SSD installation positions..
  • EASY INSTALLATION: The Open Air Mining Frame has precise screw holes and easy installation. You can quickly complete the layout of the Mining Rig. Product size 19.7x11.2x8.9inch (50x28.5x22.5cm)..
  • RUGGED AND DURABLE: The mining rig case is made of thickened 1.0mm steel plate. It is durable that can use for many years. Fully Protecting Your GPU and Electronic Device. Open Air Mine Frame Design + 6 Graphics card spacing 81.28mm(8 Graphics card spacing 60.96mm) bring you the ultimate heat dissipation performance..
  • IMPROVEMENTS & UPGRADE: We learned that the first generation of products has the defect of weak support for short graphics cards. Now, we're rolling out our new Mining Rig Frame! The addition of the middle s....
Check Stock

MLLIQUEA 8 GPU Mining Rig Frame Case, Cryptocurrency Mining Machine System & Platform, Barebone Motherboard for ETH with 6 Cooling Fans, Miner Frame Case with SSD, RAM(Without PSU/GPU)

  • 8 GPU Ports - The mining machine system comes with 8 GPU interfaces, and the GPU interface spacing is about 55mm. 8 GPUs can be installed on the motherboard at the same time. The actual work done for you is lasting and rewarding. Small size, more suitable for mining factories. We can provide 24 hours technical support and no reason to return the product..
  • Upgrade Material - Our mining GPU frame case is made of high-quality steel, which is sturdy and durable, and can be reused. Six cooling fans, fast heat dissipation to ensure your normal use. Can fully protect your GPU and electronic equipment from damage and saves your use cost. Excellent equipment design to improve GPU performance. It is recommended that you buy MLLIQUEA 2000W power supply, which is sold in our store. Suitable for this case, more efficient mining..
  • Eth Mining Rig - Including: motherboard, Intel CPU (with CPU radiating plate*1), 128GB SSD, 4G RAM, 4500 rpm cooling fan * 6 , 6 PIN cable to (6 + 2) Pin * 8pcs（male to male）, screws ​​package. There are two power connection methods: the built-in power supply requires you to purchase additional female to male cables, and the external power supply can directly use the male to male cables we give away. For detailed wiring, please ref....
Check Stock

Mining Rig Case 8 GPU Mining Case with 8 Powerful Cooling Fans and Mining Motherboard (Without GPU, PSU) for ETH/ZEC GPU Mining Rig Cryptocurrency System Machine

  • 【8-Port Ming Rig Frame】The mining rig frame has 8 GPU ports,and the GPU interface spacing is about 70mm. You can install 8pcs of GPUs on the motherboard at the same time. It’s compatible with a wide range of graphics cards..
  • 【8 Powerful Cooling Fans】The mining rig case include 8 powerful cooling fans. More quite, accelerating the air convection,the design of one air volume in and one out with more space keep the graphics card running at high performance..
  • 【Safe and Effective】The low power consumption, reduce heat generation, energy-saving, and safe use. It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc..
  • 【Mining rig case Including】 motherboard, CPU, power switch line, 4G RAM, 3000 rpm cooling fan * 4, 6 PIN cable to (6 + 2) Pin * 8pcs, screws package..
  • 【Tips】The GPU miner machine system doesn't come with GPU or PSU. You need to install your own power supply Hard drive, and GPU to work normally. Please feel free to contact us if you have any questions..
Check Stock

ATX 1600W Full Modular Mining Power Supply GPU for Bitcoin Miner ETH Rig Supports 6 Graphics 80+ Gold Certified with 150CM US Plug Adapter Cable(110V)

  • This power supply is special for mining machine, in order to effectively dissipate heat, the fan speed is above 6000 RPM, so the noise is normal, if forced to choose to use in PC,there is no way to avoid this noise, PC power fan used within 2000 RPM..
  • This is a power supply specially designed for the US 110V.The modular mining power supply can be a perfect tool for your Eth Coin rig.Rated power is 1600w. DC circuit design, stable voltage output..
  • 80 PLUS Gold Certified PSU 150mm cooling Fan and Auto Fan Speed Control.150mm large fan design for optimal system cooling and maximizing performance.Compatible with quality, efficiency and stability balance, pursuing continuous real power output..
  • 1x IDE.It's better for Bitcoin GPU mining,100% Brand New and High quality - GPU:Support Up to 6 GPU(GPU is not included).
  • Using a new large-capacity large magnetic ring material, the performance is very stable. Widely used in variety of mines and high-power single 12V industrial equipment..
Check Stock

8 GPU Mining Rig Frame 68mm Slots with 8 Fans, Cryptocurrency Mining Machine with Barebone Motherboard for ETH/ Ethereum, Miner Case with RAM, SSD

  • 【Complete Mining Rig】 The miner is almost completed, The extras you need are a power supply, GPU, HDMI cable. It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc. Please ensure that all connection interfaces are in good contact to prevent the motherboard/GPU from overheating..
  • 【With 8 GPUs Motherboard】 The mining motherboard with 8 spaced expansion slots, 68 mm between each slot, allow you run 8 GPUs simultaneously. Compatible with 1660, 2070, 3080, 3090, RX580 and other series of graphics cards, But 3060 is not supported. The hash rate will be halved or even less. Note: GPUs longer than 35 cm in length are unavailable..
  • 【8 Fans Support & Fan Controller 】 The cryptocurrency mining rig is equipped with 8 PCS cooling fans. 4 fans pull the air in and other 4 fans in the opposite direction pull the air out to keep GPU/motherboard/PSU cool. Fan controller can control the fan speed from 2500 to 4500 rpm..
  • 【Mining Technical Support】 Support OS/Windows, but for most graphics cards, the OS system will be relatively stable. Note: There is no system installed in the hard disk, you need to download it yourself. The mining machine is an item that requires technology. If you encounter technical trouble, please....
Check Stock

80mm Slim Quiet Computer Fan 12V 80mm x80mm x15mm Silent PC Fan 4Pin PWM for Computer PC Case Mini- ITX Builds EVGA GPU CPU Cooler Radiator Cooling Fan 800-2200RPM 3-Pack

  • ❤80MM SLIM DESIGN: 12v dc 80mm slim pc computer fans designed for narrow space diy project cooling system and small ITX pc case or water-cooling radiator fan replacement..
  • ❤FAN SPECIFICATION: 80mm small 12v dc cooling fan 3.15inch x 3.15inch x 0.59inch with 12v dc 0.15a 1.8w at speed 800-2200rpm airflow: 22.8cfm noise level :26.8dBA(max) cable length:40cm 15.75inch..
  • ❤4PIN PWM FAN:80mm 4Pin PWM case fan to be fit for 4pin CPU PWM fan port or water-cooling radiator. motherboard will adjust the fan speed from 800RPM-2200RPM according to inner working temperature automatically..
  • ❤WIDE APPLICATION: 12v 80mm 8015 slim cooling fan with 4pin 4 wire pwm function for diy moderm cabinet projects cooling system , as replacement fan for electronics device equipment & water-cooling radiator ,build small mini-itx atx case cooling and diy gpu cooler fan of mining rig frame..
  • ❤HYDRAULIC BEARING: Hydraulic bearing up to.
Check Stock

MLLIQUEA 8 GPU Mining Rig Frame, 70mm Mining Machine System & Platform, Barebone Motherboard for ETH with 4 Cooling Fans, Miner Frame Case with SSD, RAM (Without PSU/GPU)

  • 8 GPU Ports - The mining machine system comes with 8 GPU interfaces, and the GPU interface spacing is about 70mm. 8 GPUs can be installed on the motherboard at the same time. The actual work done for you is lasting and rewarding. (Please read the NOTE in the Product Description carefully before purchasing!)Two kinds of motherboards are shipped randomly..
  • Upgrade Material - Our mining GPU frame case is made of high-quality steel, which is sturdy and durable, and can be reused. Can fully protect your GPU and electronic equipment from damage and saves your use cost. Excellent equipment design to improve GPU performance. It is recommended that you buy MLLIQUEA 2000W power supply, which is sold in our store. Suitable for this case, more efficient mining..
  • Eth Mining Rig - Including: motherboard, Intel CPU (with CPU radiating plate*1), 128GB SSD, 4G RAM, 4500 rpm cooling fan * 4 , 6 PIN cable to (6 + 2) Pin * 8pcs, screws ​​package. Compatible with Win10 /iOS, but you'll need to install the system yourself. (Graphics cards longer than 320mm cannot be used.).
  • Safe and Effective - It can be low power consumption, reduce heat generation, energy-saving, and safe use. This is a must for mining Ethereum (ETC), and any other cryptocurrency. Note: The hard disk i....
Check Stock

8 GPU Mining Rig 70mm Slots with 2000W Power Supply, 8 Fans Crypto Coin Miner Frame with Barebone Motherboard for Ethereum, Cryptocurrency Mining Case with SSD/RAM (Without GPU)

  • ...Can not be used at household voltage of 110V） The number of revolutions is as high as 7000 rpm per minute so the heat dissipation effect is good. The power efficiency is about 90%. Please reserve about 300W for the motherboard, fan, and other wire consumption..
  • 【8 GPUs Support】8 GPU 75mm expansion slots in the mining computer case. For our power supply, the power efficiency is 90%, the rated power is 2000W, and the output power=2000*90%. So we recommend to run 8 PCS 3070/6800/6800XT 6900/6900XT GPUs simultaneously, run max 5 PCS 3090, run max 6PCS 3080 without overclocking. Note: GPUs longer than 32 cm in length are unavailable. We don’t recommended to mix various types of GPUs..
  • 【8 Fans Support & Fan Controller 】The cryptocurrency mining rig case is equipped with 8 PCS cooling fans. 4 fans pull the air in and other 4 fans in the opposite direction pull the air out to keep GPU/motherboard/PSU cool. Fan controller can control the fan speed from 2500 to 4500 rpm..
  • 【 5 USB Ports 】 It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc. The miner case has 5 USB ports. Please ensure that all connection interfaces are in good contact to prevent the motherboard/GPU from overheating..
Check Stock

BIHAIT 4K HDMI Dummy Plug,High Resolution Virtual Monitor Headless Ghost Display Emulator,3840x2160@60Hz Adapter for Ethereum BTC Mining, Compatible with Windows Mac OSX - 6 PC（Blue）

  • ...OHO servers and remote-deployed headless PCs.
  • 【High performance】 - 4K High Resolution Hdmi Display Emulator - Headless Ghost with 3840×[email protected] & [email protected] high resolution makes GPU speeded-up remote desktop and GPGPU operations like ryptocurrency mining, rendering and simulations..
  • 【Unlock the Potential】 - HDMI dummy dongle ensures stable digital signal and unlocks the full potential of graphics card, avoid distorted image.Works great with virtual desktop on Oculus Rift & HTC Vive. (Hdmi 4K,VGA,DVI,DP,Mini DP, HDMI).
  • 【Efficient】 - Fit headless HDMI display emulator simplifies streaming games and multimedia from a headless gaming PC to the living room with high refresh rate and HDMI audio. Saves the need to connect a display to a PC when used with a VR headset. It also enables your mining rig boots normally..
  • 【Supports All Systems】 -Works with Windows, Mac Mini OSX Linux, PC and any HDMI enabled computer. It will work with any graphics card without incompatibility issues. Virtual display adapter fits into the HDMI output, they act exactly t....
Check Stock