Top Miter Gauge

Rockler 36'' Miter Track - Miter Slot Fits 1' x 1/2' Deep Dado & Accepts a Standard 3/4' x 3/8' Miter Bar – Premium Grade Anodized Aluminum Miter Track Slot – Comes Pre-Drilled, Countersunk w/ Four Holes

  • Rockler 36'' Miter Track Bar: Our 36” inch miter slot track expands the use of the router table by providing the use of many sleds, clamps, jigs, and other woodworking devices..
  • Perfect Application: Set up your jigs, fixtures, and shop-made router tables for a perfect smooth-sliding miter gauge. This is the ultimate table saw miter track to build your own custom table saw or router table..
  • Perfect Size: The track fits into a 1" x 1/2" deep dado and accepts a standard 3/4" x 3/8" miter bar. Adjusts for perfect sliding action in any standard miter gauge track with just a twist of the wrist..
  • Durable Material: Our woodworking jig miter slider is constructed of 100% aluminum for excellent durability without the weight..
  • Easy Install: For fast, trouble-free installation, the miter slot gauge comes pre-drilled and countersunk with four holes for #6 mounting screws (not included)..
Check Stock

Fulton Universal Aluminum Miter Gauge Fence with an Aluminum Flip Stop 18” Left Reading Tape 18” Right Reading Tape

  • When cutting mitered angles with your table saw you always want to make sure that have enough support of your stock when feeding it through the blade. The table saw blade is rotating toward you at a high rate of speed and if your workpiece moves to the side, the result can be scary and downright dangerous. With the help of a miter gauge and with our Aluminum Miter Fence secured to it, you will have full support all the way up to the blade on most of your miter angle cuts..
  • The Aluminum Miter Fence has been cut at 45 degrees on both ends of the fence. Doing this allows you to get as close to the blade as possible so your workpiece is fully supported throughout the cutting process. Straight cut or 90 degree cut fences have a large gap between the fence and the blade because it can not get as close with the straight cut ends on the fence..
  • Many times when we make miter cuts on our table saw, we need 2 or more pieces that are the exactly same length. While using the included measuring tapes that are included are pretty good at this, we have also included a handy flip stop that locks into any location along the length of the fence. This allows you to make repetitive length cuts without worrying if the pieces will end up the same. The flip stop can can simpl....
Check Stock

POWERTEC 71391 Table Saw Precision Miter Gauge System 24” x 3” Multi –Track Fence with 27 Angle Stops

  • Includes: (1) table saw miter gauge, (1) multi-track miter fence, (1) t-track flip stop.
  • Function: cost effective 3-piece set designed to give you everything you need to produce higher precision cuts (including cross cutting) while quick and accurate project results.
  • High precision miter gauge: features 27 angle indexing stops with 1-degree step spacing and positive stops at 0°, 10°, 22½°, 30° and 45° and nine others, both left and right.
  • Multi-track miter fence: smooth, laser engraved scale, extruded aluminum profile with a universal design that accepts accept 1/4"-20 hex Bots, 1/4” t-bolts and 5/16” T- bolts.
  • Miter saw flip stop: delivers exceptional cut-length control, with a convenient locking mechanism and an adjustable setting to work from left or right.
Check Stock

Husqvarna K4000 Cut-N-Break Saw Orange

  • [SETS UP IN SECONDS] Take this table saw to the job site or move it around the workshop. There’s even a built-in carry handle.
  • [CUTS LIKE A FULL-SIZE] With the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts.
  • [TOOL-LESS BLADE CHANGE] Uses any brand’s standard 4” T-shank blade, but we threw 5 in the box to get you started cutting wood, ceramic tile,....
  • [0-60° MITER CUTS] With the adjustable gauge you can pull off precise miter cuts for a whole assortment of woodworking projects.
  • [ON-BOARD ACCESSORY STORAGE] When the miter gauge, rip fence, and extra blades aren’t in use they can be conveniently housed in the base of the saw.
Check Stock

Table Saw, Mini Polisher, Benchtop Buffer Grinder, Polishing Engraving Carving Sanding Cutting, for DIY Jewelry Lapidary Gem Rock Woodworking (D.Woodworking Table Saw 10000RPM)

  • [GREAT AT CROSS & RIP CUTS] The steel rip fence and riving knife system lets you perform an assortment of straighter, longer, wider cuts.
  • [TRULY PORTABLE TABLE SAW] Weighing in at less than 15 lbs., you easily can move it around your workshop or even take it to the job site.
  • [ADJUSTABLE MITER GAUGE] Makes 0-60 miter cuts from both the right and left sides, so you can make every common miter cut, and every angle in-between.
  • [SAFETY SWITCH] An added safety switch and safety key give this saw an added level of security, so you don’t have to worry about accidental starts.
  • [DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX.] WORX tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last. On-board storage for miter gauge, rip fence and blades.
  • [ACCESSORIES INCLUDED] 5 blades (woods, aluminum, scrolling, ceramic tile, steel) rip fence, miter gauge, dust extraction port, and blade grip. Sets up in seconds to cut wood, metal, tile, aluminum or plastic..
Check Stock

INCRA Miter Combo Value Pack

  • Dock & Lock the included INCRA Miter Gauge in Seconds.
  • Removable t-slot retaining clips & adjustable miter bar.
  • GlideLOCK Miter Bar - The Miter 1000SE's 6 expansion disks adjust both sides of the bar for ZERO side play, anti-friction travel on all table saws....
  • Special Edition Telescoping INCRA-LOCK Fence.
Check Stock

Miter Bar, 1Pcs Durable In Use Aluminium Alloy Miter Bar Slider Table Saw Gauge Rod Wood Working Tool Suitable for Jigs Fixtures Sleds Router Tables and General Woodworking, 300 mm / 11.81 inch

  • Wide Applications : This is a miter bar usually used in table saw woodworking works, for building various jigs on your table saw, like miter sleds etc..
  • Convenient to Use : Universal threaded mounting holes for convenient use. Includes plans for a wide variety of shop-made jigs and fixtures. Adjustable stainless steel runner for perfect sliding action.
  • Good Performance : Adjusts for perfect sliding action in any standard miter gauge slot with just a twist of the wrist. Locks securely in any standard miter gauge slot with another twist of the wrist.
  • Useful and Practical : For building various jigs on your table saw, like miter sleds. Includes threaded mounting holes and hardware for easy attachment to any application.
  • Fine Quality Aluminium Alloy Material : Made of high quality aluminium alloy, this miter bar is of strong strength and reliable durability for several year using without abusing.
Check Stock

Worx WX572L 5.5 Amp BladeRunner Portable Electric Table Top Saw

  • [GREAT AT CROSS & RIP CUTS] The steel rip fence and riving knife system lets you perform an assortment of straighter, longer, wider cuts.
  • [TRULY PORTABLE TABLE SAW] Weighing in at less than 15 lbs., you easily can move it around your workshop or even take it to the job site.
  • [ADJUSTABLE MITER GAUGE] Makes 0-60 miter cuts from both the right and left sides, so you can make every common miter cut, and every angle in-between.
  • [SAFETY SWITCH] An added safety switch and safety key give this saw an added level of security, so you don’t have to worry about accidental starts.
  • [DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX.] WORX tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last. On-board storage for miter gauge, rip fence and blades.
Check Stock

Miter Bar Slider Table Saw,Aluminium Alloy Miter Bar Slider Table Saw Gauge Rod Woodworking Tool for Building Various Jigs on Sleds Tables General Woodworking(300 mm / 11.81 inch)

  • 【Practical Tool】This is a miter bar usually used in table saw woodworking works, Width: Approx. 19mm / 0.748''.
  • 【Durable Materials】The miter bar is made of high quality aluminium alloy materials, it is of strong strength and long durability, it is of strong strength and reliable durability for several year using without abusing..
  • 【Adjustable Runner】Adjustable stainless steel runner for perfect sliding action..
  • 【Easy to Use】Universal threaded mounting holes for convenient use, adjusts for perfect sliding action in any standard miter gauge slot with just a twist of the wrist. Locks securely in any standard miter gauge slot with another twist of the wrist..
  • 【Wide Application】For building various jigs on your table saw, like miter sleds etc..
Check Stock

POWERTEC 71156 Aluminum T-Track 48 Inch Combo with Aluminum Miter T-Bar

  • FUNCTION: The POWERTEC Miter track and bar set is designed to help build an assortment of sliding jigs and fixtures, while enhancing overall bench top table tool precision and functionality. They can be used together or separately, the miter track works with standard ¾” x3/8” miter bars and the T-bar fits standard ¾” x3/8” t-slotted miter slots..
  • APPLICATIONS: Ideal for benchtop table saws, router tables, band saws, and other woodworking shop projects that require a versatile set of miter track channels.
  • DESIGN: Both anodized aluminum extrusions possess a heavy duty construction, and feature a center guide track perfect for drilling and project alignment - The miter t-bar slides seamlessly into the miter track or t-slot.
  • SIZE SPECIFICATIONS: T-track works with ¾” x 3/8” miter gauges, with or without t-slot plate.
  • t- bars fit perfectly into t-slotted miter gauge slots - The 48" length can be custom cut to suit your individual project requirements.
Check Stock

Aluminum Box Joint Jig for Miter Gauge, Miter Gauge Accessories, Joint Jig for Miter Gauge Woodworking Table Saw Tools, Woodworking Tools

  • SPECIFICATIONS: Size: about 450x60x30mm / 17.7×2.4×1.2 inches. Packing list: 1x aluminum box joint fixture, 1x package accessories. Professional design, just for you!.
  • Premium MATERIAL: The box joint jig is made of high quality aluminum alloy, wear resistant and rustproof, excellent performance and long service life..
  • ROUTER TABLE SAW DIY TOOLS WOOD JIG: The miter Gauge Accessories is high precision, excellent workmanship. Miter Bars for miter gauge woodworking tool. Is a good product for you to be a carpenter!.
  • SUIT FOR: Aluminum box joint jig fits is the box joint jig suitable for miter gauge. Use it on your table saw or router tables with standard slots to cut great looking box joints..
  • QUALITY AFTER-SALES: 100% GUARANTEED RETURN AND EXCHANGE, 1 YEAR WARRANTY!!! You are welcome to contact us if you have any problem about our product, we will give you a satisfactory reply..
Check Stock

Rockler Retrofit Double Featherboard Kit

  • APPLICATION: Ideal for holding your workpiece in place (against the fence or table top) while cutting for router table and drill press applications, while safely keeping your fingers out of harms way from bits and blades.
  • PREMIUM DESIGN: Made with highly durable polymer, this featherboard set allows you to apply steady, heavy duty pressure for high precision cutting results while reducing kickback and problematic movement.
  • EASY TO INSTALL: 5-star threaded knobs and a standard 3/8” x ¾” miter gauge slot bracket allows you to set up your feather boards quickly and easily to any miter slot. Also includes 5/16”-18 t-bolts for t-slot or t-track applications.
  • VERSATILITY: For band saws, router tables and/or any woodworking machine with a standard 3/8” x ¾” miter gauge slot – double stacked and locked in both the horizontal and vertical position.
Check Stock