Top Mk8 Nozzle

Upgrade 3D Printer Extruder Assembled MK8 Hot End Kit with Capricorn PTFE Bowden Tubing for Ender 3/Ender 3 Pro 1.75mm 0.4mm Nozzle

  • Upgrade Extruder Assembled MK8 Hot End Kit with Capricorn PTFE Bowden Tubing.
  • Capricorn PTFE tubing: High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more....
  • Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V 40W.
  • Suitable For Creality ender 3/ender 3 Pro.
Check Stock

Hardened Steel Nozzle 0.4 mm/ 1.75 mm 3D Printer MK8 Nozzles Tool High Temperature Wear Resistant Compatible with Makerbot Creality CR-10 All Metal Hotend Ender 3/ Ender3 pro Prusa i3 5 Pieces

  • Durable material: MK8 extruder nozzles are made of hardened tool steel, good abrasion resistance, heat resistance and corrosion resistance, sturdy....
  • Good performance: this hardened tool steel nozzle has higher toughness and hardness, not only suitable for common 1.75 mm 3D printer filaments, but....
  • High precision: the inner wall of the MK8 nozzles is smooth and has no burrs, the viscosity coefficient is small, extruder nozzle diameter error less....
  • Compatibility: these 3D printer nozzles compatible with MK8 hotend for Creality 3D printers, such as Ender-2/ Ender-3/ Ender-3 pro/ Ender-5, also....
  • What you get: package comes with 5 pieces of black MK8 nozzles, the size is 0.4 mm, sufficient quantity to facilitate your timely replacement,....
Check Stock

25PCS 3D Printer Nozzles, Premium MK8 Nozzle Ender 3 Nozzles 0.4 mm, 3D Printer Brass Nozzles for Makerbot Creality CR-10 Ender3 V2 Ender3 Pro with 5 Needles by Zojicif

  • 【High precision】the inner wall of the 3D printer nozzles is smooth and has no burrs, its viscosity coefficient is small, high precision&perfect aperture, so premium MK8 nozzle can prevent print head from leakage and allow for easy flow of the filament without clogging..
  • 【Premium Quality】Our 3D printer nozzle are made of high quality brass material, heavy duty and provide a long service life, easy to install and change. Our premium MK8 Ender 3 Nozzles input diameter 2.00mm, output diameter 0.4 mm, out thread M6, thread length 5mm..
  • 【Applicability and Compatibility】Our premium MK8 nozzles ender 3 nozzles fit for 3D Printers like Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 Max/Ender 5 Series/CR 10 Series, compatible-with all 1.75mm PLA ABS 3D printers. Fit exactly like the original..
  • 【Good performance】Our precision 3d printer brass nozzles MK8 nozzle has impressive toughness and hardness, not only suitable for common 1.75 mm 3D printer filaments, but also can be applied for printing filaments of carbon fiber, fiberglass, etc..
Check Stock

Sunhokey Extruder Assembled MK8 Hot End Kit for CR10 with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle(12V 40W)

  • High-quality 3D Printer accessories for Creality CR-10 CR-10S S4 S5..
  • Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle..
  • MK8 Extruder Hot End Kit, the white wire is temperature thermistor, the red wire is heating tube 12V 40W..
  • Tip of the nozzle, aluminum heating block, throat pipe ..
Check Stock

Onyehn 22pcs/Lots A8&A2 3D Printer Part Each 5PCS 0.4mm Extruder Nozzle Print Head+1.75mm Teflon Throat Tube+Heater Blocks Hotend for MK8 Makerbot Reprap

  • Pack of 5 x 3D Printer Extruder Hotend 30mm Length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) and 5 x 3D Printer 0.4mm....
  • 0.4mm Extruder Brass Nozzle Print Head: Color - Golden.
  • Compatibility: compatible with all 1.75mm PLA ABS 3D Printer.
  • Quantity:22pcs/lot (5x 3D Printer Nozzle Throat Tube 5x Nozzle Print Heads 5x Heater Blocks Hotend 5x M6 nuts 2x Hex Key Wrenches (for MK8 Makerbot....
Check Stock

25PCS 3D Printer Extruder Nozzles Hardened Steel Stainless Steel Brass High Temperature Pointed Wear Resistant Nozzle 0.2 0.3 0.4 0.5 0.6 0.8 1.0 mm

  • Premium Quality: MK8 nozzles are made of high quality Hardened Steel, Stainless steel and Brass.Heavy duty and provide a long service life.Easy to....
  • Package Include--Printer nozzles come with 25pieces MK8 nozzles in 7 sizes(quantity x output diameter): 3x 0.2mm, 3x 0.3mm, 7 x 0.4mm, 3 x 0.5mm, 3x....
  • Applicability and Compatibility--MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, Anycubic, compatible with all 1.75mm PLA ABS 3D....
  • output diameter 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm.
  • Excellent Cleaning Needles-The nozzle cleaning needles are very flexible and robust, easy to bend the needle into nozzle and will not break. Perfect....
Check Stock

CHPOWER CR-10 hotend Assembly MK8 Extruder Original Replacement for CR10/ CR-10S/ CR-10S400/ CR-10S500-12V 40W

  • This cr-10 hotend can work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
  • 100% original and high quality 3D Printer accessories for CR10/ CR10S/ CR10S4/ CR10S5.
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, black wire is heating tube 12V 40W.
  • Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon).
  • CHPOWER is a TRUSTED VENDOR, we provide 12-month manufacturer service on all parts. Buy with confidence..
Check Stock

Creality Original 3D Printer Extruder Assembled MK8 Hot End Sprinkler Kit for Ender 3 / Ender 3 Pro with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle

  • ENDER 3 EXTRUDER is 100% ORIGINAL CREALITY 3D PRINTINGE PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY, WE JUST CONFIRM IT WORKS WITH CREALITY ENDER 3 3D PRINTERS. OTHERS BRANDS WE DO NOT TEST IT..
  • 5 PIECES 0.4MM 3D PRINTERS NOZZLES AS GIFT..
  • ENDER 3 EXTRUDER HOT END CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE.
  • MK8 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 24V 40W.
  • TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON).
Check Stock

Creality 8 PCS 3D Printer Hardened Steel MK8 Nozzles Upgraded Tungsten All Metal Extruder Nozzles 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm for Creality Ender 3 Ender 3 V2 Ender 3 pro CR-10

  • [Super Durable Tungsten] - MK8 extruder nozzles are made by paramount hardened tungsten steel, with longer lasting time than the normal brass nozzle.....
  • [Super High Temperature Resistance] - The max temp of this hardened tool steel nozzle could reach at 450c, suitable for 3D printing at high....
  • [High Precision More Than Your Imagination] - Keep stable temperature during printing, let the filament out evenly, create more perfect printer item....
  • [Applicability & Compatibility] - Our Creality Nozzles are compatible with almost all FDM printer, also fits for MK8 heating block. Our tungsten....
  • [Parts Included] - Coming with 8 pieces of black different size MK8 nozzles, the size is 0.2mm/0.3mm/0.4mm/0.5mm/0.6mm, sufficient quantity and size....
Check Stock

Aokin 8 Pcs 0.6mm MK8 Extruder Nozzles 3D Printer Nozzles for Creality Ender 3/3 Pro/3 V2 Ender 5/5 Pro CR-10/10S Makerbot Anet A8 3D Printer

  • Package include: 8 x 0.6mm 3D printer MK8 extruder nozzle..
  • Compatibility: the MK8 nozzles fit for Creality Ender 3/3 Pro, Ender 3 V2, Ender 5/5 Pro, CR-10/10S, Makerbot MK8, Reprap Prusa I3, Tevo Tarantula,....
  • Size: the MK8 3D printer nozzles - Filament Diameter: 1.75mm, Output Diameter: 0.6mm, Screw Thread: M6, Hexagon diameter: 6 mm..
  • Material: the 3D printer nozzles are made of premium brass, sturdy and high-temperature resistance, smooth silk, connect with M6 out thread, easy to....
  • Aokin 3D printer nozzles use high-quality raw materials and fine workmanship, if you have any question about our product, please feel free to contact....
Check Stock

BIGTREETECH Direct Metal Hotend with MK8 Nozzle CR10 Extruder Heatsink for CR10 Ender 3 Upgraded 3D Printer Parts

  • ⭐【Item Name】: All Metal MK8 Hotend CR10 Extruder Conversion Kit compatible with Creality Printers..
  • ⭐【CR10 Heatsink Hotend】: Strong and durable, imported aluminum quality, efficient heat transfer,Compatible with CR10S, Ender 3 Series and BIQU....
  • ⭐【Package Including】: 2 * 4mm PTFE Tube.
  • Compatible with 100K NTC 3950 thermistors.
  • Uses MK8 Nozzle and 6 * 20mm Heater Cartridge..
  • ⭐【Warm Notice】When replace the honted, should preheat the honted, setting the nozzle to 234°..
  • ⭐【Technical Support】If you have any question, please feel free to QA or tell us through Amazon, we will get back to you within 24h..
Check Stock

CR-10S 3D Printers Original Replacement Parts/Accessories Full Assemble MK8 Extruder Hot End Kits with Nozzle 0.4mm /0.2mm /0.3mm /0.5mm fit for Creality 3D Printing Printer CR-10 CR-10S S4 S5

  • Creality CR10 Extruder,100% ORIGINAL CREALITY 3D PRINTING PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY.
  • MAIN MATERIAL OF CR10 EXTRUDER IS ALUMINUM ALLOTY /STANIESS STEEL/BRASS.
  • CREALITY CR10 EXTRUDER CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE.
  • MK8 CR10 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 12V 40W..
  • TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON).
Check Stock