Top Module Display

waveshare for Raspberry Pi Pico Evaluation Kit B Include Pi Pico Board with Pre-Soldered Header,1.14inch RGB Color LCD, 10DOF IMU Sensor Module,Dual GPIO Expander,Breadboard

  • Raspberry Pi Pico Evaluation Kit inlclude Raspberry Pi Pico with pre-soldered header ,1.14inch LCD Display Module,10-DOF IMU Sensor Module,Dual GPIO Expander ,830 Quality Breadboard etc.
  • Raspberry Pi Pico Board,a tiny, fast, and versatile microcontroller board,Built Using RP2040 Microcontroller Chip Designed By Raspberry Pi.
  • 1.14" LCD Display Module for Pico ,Embedded ST7789 Driver, Using SPI Bus.
  • 10-DOF IMU Sensor Module,an IMU sensor expansion module specialized for Raspberry Pi Pico. It incorporates sensors including gyroscope, accelerometer, magnetometer, baroceptor, and uses I2C bus for communication..
  • Dual GPIO Expander for Pico,Two Sets Of Standard Raspberry Pi Pico GPIO Male Headers.
Check Stock

Adamanta 32GB 2x16GB Memory Upgrade Compatible for 2017 Apple iMac 27 Retina 5K Display DDR4 2400MHz PC4-19200 SODIMM 2Rx8 CL17 1.2v Dual Rank RAM DRAM

  • 32GB ( 2x16GB ) DDR4 2400 Mhz Non-Parity/Non-ECC Unbuffered SODIMM Memory 260 pin Dual Rank Module..
  • Compatible with all 2017 27 inch w/ Retina 5K Display iMacs of every specification! Compatible with 2017 27" iMac with 5K Retina Display with the....
  • Compatible with all 2017 21.5 inch w/ Retina 4K Display iMacs of every specification! Compatible with 2017 21.5" iMac with 4K Retina Display with the....
  • Every module is backed by a limited lifetime warranty. We always have hundreds in stock! Free technical support from our experienced technicians..
  • Every single memory module is fully tested by the manufacturer. Our experienced technicians can verify if these parts will work for you..
Check Stock

5PCS 0.96 Inch OLED Display Module, PEMENOL 28 x 64 Pixel I2C IIC Serial 1 OLED LCD Display Module with SSD1306 Driver for Arduino Raspberry Pi and ESP8266（White Light）

  • This is a new 2.8 inch serial SPI color display module with touch function.
  • Designed with one socket for memory card.
  • With PCB plate (including power supply IC, Memory Card), compatible with 5110 interface.
  • 5V compatible, use with 3.3V or 5V logic.
Check Stock

AITRIP 3pcs Multi-Function Shield ProtoShield Multi-Functional Expansion Board Sensor Shield Module with Four Digital Display Compatible with Arduino

  • 4 LED lights (LED indicator to know the importance of doing in the actual project, with this indicator can work directly with the program status indicators for easy debugging..
  • AITRIP 3pcs Multi-Function Shield ProtoShield Multi-Functional Expansion Board Sensor Shield Module with Four Digital Display Compatible with Arduino.
  • Four digital (using 74HC595 driver provincial IO learning SPI), you can do digital display test (can display temperature, voltage, counter value, etc.)..
  • Expansion board directly connected with LD3320 non-specific voice recognition module, you can achieve voice control..
  • Expansion board directly with the SG90, MG945 MG995 and other steering gear connected to achieve the robot and other complex actions..
  • Expansion board directly with the SYN6288 free voice module docking,it can achieve voice broadcast function..
Check Stock

LCD Module 2004A 5v IIC I2C LCD Display Module, Blue Screen White Character Serial Peripheral Interface

  • The module is a low-power consumption character LCD Module with a built-in controller..
  • The module can be easily interfaced with a MCU..
  • Display Format: 20 Characters x 4 lines..
  • It is fantastic for Arduino based project..
  • Fully assembled and tested Serial LCD 20x4 Module..
Check Stock

1.8 inch SPI TFT LCD Display Module for ST7735 128x160 51/AVR/STM32/ARM 8/16 bit

  • This is a new 1.8 inch serial SPI color display module.
  • Support analog SPI and hardware SPI. SPI serial, less I/O port need.
  • Designed with one socket for sd card and PCB adapter for LCD.
  • The LCD display module can be driven by 8051 / AVR / PIC /ARM/STM32.
  • The 4D systems lcd display can be driven with at least four IO.
Check Stock

5 Pieces I2C Display Module 0.91 Inch I2C OLED Display Module I2C OLED Screen Driver DC 3.3V~5V White Display Color

  • What will you get: there are 5 pieces OLED display module with classic display color, self-illuminated and no need backlight.
  • Power-saving display: the I2C oled display performs better than the traditional LCD display and with lower consumption the IIC (I2C communications)....
  • More details: use compatible with Arduino, ESP8266, ESP32, STM32, etc..
  • Good compatibility: this i2c oled display module is compatible with Raspberry Pi 4B/3B+/3B/2B/Zero, compatible with Arduino, also compatible with....
  • Product manual: as shown in the instructions.
Check Stock

LANTRO JS 1.14 Inch TFT Color LCD Display Module ST7789 8Pin IPS 135x240 TFT Display Screen Module

  • The module is a low-power consumption character LCD Module with a built-in controller..
  • The module can be easily interfaced with a MCU..
  • Display Format: 20 Characters x 4 lines..
  • Fully assembled and tested Serial LCD 20x4 Module..
Check Stock

1.44Inch TFT Display Module LCD Display Screen 128RGB x 128 Resolution Serial Peripheral Interface

  • The display module is connected with other board via a serial peripheral interface. It is designed with one socket for sd card which makes it very convenient..
  • The display model is a-TFT with a display size of 1.4in with the high quality driving IC chip ST7735S, the module works more stable..
  • The lcd display screen is graphical 128RGBx128 dot . The LCD effective area is 25.5x26.5mm and the size of each pixel is 0.20x0.20..
  • The lcd display screen is ideal for clear presentation of texts, graphics and images, with a large 1.8 inch sized screen and integrated SD card reader..
  • We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..
Check Stock

Compute Module DSI Display Adapter, 22PIN to 15PIN Adapter, for Official Compute Module 4 IO Board and Waveshare Compute Module IO Board,Compute Module IO Board Plus

  • Compute Module DSI display adapter, 22PIN to 15PIN, allowing the Compute Module to use 15PIN DSI displays.
  • Suitable for Compute Module IO Board,connecting with Compute Module 4 IO Board.
  • Suitable for connecting with Waveshare Compute Module IO Board Plus.
  • Support all Waveshare DSI LCD, such as 4.3inch DSI LCD,5inch DSI LCD,4.3inch DSI LCD (with Case).
Check Stock

40x4 Character LCD (190x54) FSTN White

  • 【CHANGEABLE IIC ADDRESS】: The built-in standard driver chip SSD 1306 already exists in the libraries of Raspberry Pi and 51 Series,which makes programming very easy. This oled display can be used with different machine easily..
  • 【128 X 64 PIXELS】: With high resolution of 128 x 64 pixels, no need backlight, self-illumination, pixels stand outvery well even in a brighter circumstances like full sunlight..
  • 【COMPATIBLE WITH MANY CONTROL CHIPS】: This oled display can be widely use with 51 series, MSP430 series, STM32/2, CSR IC, etc. 4PCS male pins makes the lightweight connecting easily..
  • 【WIDE FIELD OF CLEAR VIEW】: 0.96inch OLED display module supports 180 degrees of view from up to down and right and left, which is convenient for you to clearly observe the information displayed from different angle..
  • 【EASY TO INSTALL】: With four square holes, our I2C OLED display module can be installed easily, truly convenient to use and simple you working..
Check Stock

Honeywell YTH8320ZW1007/U Z-Wave Enabled Programmable Thermostat

  • Please refer Page 18 and 19 of User manual for troubleshooting steps.
  • Z-Wave delivered messages allows the thermostat to be added to or removed from a Z-Wave controller.Wire saver allows for use without a common wire..
  • Intuitive adjustment for precise comfort control, easy to use touch screen display and extra large backlit display with natural language.
  • Menu Driven programming guides the user through the programming process only showing necessary information and choices on each screen.
  • Thermostat operating message feature sends a message containing the status of the HVAC equipment.
  • The YTH8320ZW1007 includes the TH8320ZW1000 thermostat plus the THP9045A1023 wiresaver module..
  • This thermostat only connects to a z-wave communicating system (not Wi-Fi). Z-Wave delivered messages allows the thermostat to be added to or removed from a Z-Wave controller. The THP9045A1023 wiresaver module must be used when there is no “C” or common wire. A common wire is required to power the thermostat.
  • Menu Driven programming guides the user through the programming ....
Check Stock