Top Module Power Connector
Great Scott Gadgets Ubertooth One Antenna & Aluminum Enclosure Bundle by Nooelec
- Everything you need to get started with 2.4GHz development, including Ubertooth One module installed into a custom shielded aluminum enclosure and a....
- All bundle components covered under warranty for 1 year, directly through Nooelec.
- Ubertooth One is a configurable 2.4GHz transceiver with great application software and support.
- and with suitable transmit power and receive....
- Standard Cortex Debug Connector (10-pin 50-mil JTAG) In-System Programming (ISP) Serial Connector.
- Expansion connector intended for inter-Ubertooth communication or other future uses.
Check StockMardatt 108 Pcs 15 30 45 Amp Quick Disconnect Power Terminals Connectors and PVC Flame Retardant Connector Sleeve Cover Kit Red Black Battery Modular Connector Set
- 【What you Get】 The quick modular connectors assorted set contains 16 pcs 15A red& black power connector, 16 pcs 30A red & black power connector, 16 pcs 45A red & black power connector, 48 pcs silver plated copper contacts(16pcs-15Amp, 16pcs-30Amp, 16pcs-45Amp)and 12 pcs cover flame retardant sleeve, totally 108 pcs..
- 【Reliable Disconnect Terminal】Made of silver plated metal, it provides the lowest electrical resistance, high current minimum and more power. The housings are modular and genderless that make sure assembly easily. Secures individual connectors in "Keyed" assemblies that prevent connection errors with similar configurations. Decent fit & finish.
- interoperable with An***son brand connectors..
- 【Black and Red Housing】 The terminal connector features with color-coded plastic cover, provides a visual identification of the compatible connector which will be matched with each other well, making sure the alignment of positive and negative cables..
- 【Practical Sleeve Cover】Made of high quality PVC material with excellent flame retardant and Insulation protection.
- Safe to use. Dimension-8*15*40mm. The size is perfect for the terminal connectors, providing the convenience of installation..
Check StockMakerHawk 6pcs USB to DIP Adapter Converter, Mini USB Female, Micro USB Female, 2.54mm 4p USB Male, USB 2.0 USB 3.0 Female, USB Type B Square Interface Female to DIP PCB Power Breakout Board Module
- Model number: Mini 5p USB Female Connector, 2.54mm 4p USB Male Connector, USB 2.0 4p Female Connector, USB 3.0 Flat Female Connector, Micro USB Type B Female Connector, USB Type B Square Interface Female Connector.
- Mini USB to DIP, USB female connector mini 5p patch to DIP, welded adapter board. USB male to Dip, 2.54mm USB 4p to Dip, adapter board has been soldered mobile phone power data cable.USB 2.0 4p female connector to DIP, adapter board has been soldered mobile phone power cable..
- USB 3.0 flat female connector to DIP module.Micro USB type B female connector to DIP, Mike 5p patch to dip, welding female power adapter. 6. USB type B square interface female connector to DIP adapter board.
- Type of Pin Headers: three 4-pin Pin Headers, two 5-pin Pin Headers and a 9-pin Pin Header.
- After-sales Service: We have a strong after-sales service team, as long as you have any questions about the product, we will solve your problem immediately after receiving your email, please click "MakerHawk-US" and click on how to send us an email "Ask a question" email us, looking forward to your inquiry, we will reply you within 24 hours.
Check StockUL Listed 8.2ft Power Cord for Bose Acoustimass 10 Series IV III Home Theater System 300 Bass Module 321 Subwoofer AC 2 Prong Polarized Power Cord Cable Replacement
- 2 prong AC extension Figure D power cord replacement for Bose Bass Module.
- Figure D polarized power cable, rated to carry: 10A,7A 125V.
- 2-prong NEMA 5-15P male plug to female D connector 8.2ft long extension power cord..
- 8.2ft long extension power cable cord for Bose 321 Acoustimass Powered Speaker System Subwoofer,Bose Acoustimass 10 Series IV III Home Theater....
- Package included:1 x 2 Prong Replacement Polarized Power Cord for Bose Acoustimass 10 Series IV III Home Theater System,Acoustimass 300 Bass Module.
- UL listed two prong power cords for safety and durable, fully molded design for long-lasting strength and performance..
Check StockWMYCONGCONG 10 PCS Game Joystick Breakout Module Game Controller Replacement Joystick Analog Thumb Stick for Arduino PS2 Switch Joy-Con Controller
- Game joystick module for Arduino PS2, electronic building blocks standard connector with 2.54mm pin..
- DO port for digital output, AO port for analog output..
- Bi-directional 10 k resistor, the resistance changes with the rocker in a different direction..
- Module uses 5V power supply, the original state of X, Y read voltage of 2.5 V. When pressing at the arrow direction, voltage increases, maximum is 5....
- Package Content: 10 pcs Game Controller Joystick Module. NOT designed for high current applications..
Check StockDZS Elec 6pcs 15cm 9V Battery Snap Connector Clip Lead Wire Experimental Battery Snap Power Cable for Arduino Project or LED Light Bar
- Type: 9V T Type Battery Snap Connector, to power anything that running with a 9V battery..
- Use: Can be conveniently connected to other power module or Arduino board..
- Cable: Approx. 15cm (6 inch) length, red wire for positive, black wire for negative, easy to connect or solder to other equipment..
- Application: Can be used for power supply or other 9V battery equipment, supplying power sourcec for Arduino Project or LED Light Bar etc. portable, easy to use..
- Package: 6pcs 9V T Type Battery Snap Connector Clip Lead Wire (NO battery included).
Check Stock5 Pack Black Light Micro Effects Light 405nm Violet LED Mini Blacklight with 9V Battery Clip for Props Scenery Fluorescent Paints Theatrical Costumes UV Glow Inks
- Type: 9V T Type Battery Snap Connector, to power anything that running with a 9V battery..
- Use: Can be conveniently connected to other power module or Arduino board..
- Cable: Approx. 15cm (6 inch) length, red wire for positive, black wire for negative, easy to connect or solder to other equipment..
- Application: Can be used for power supply or other 9V battery equipment, supplying power sourcec for Arduino Project or LED Light Bar etc. portable, easy to use..
- Package: 6pcs 9V T Type Battery Snap Connector Clip Lead Wire (NO battery included).
Check StockScrew Terminal Block Breakout Shield Module for Arduino UNO R3
- Terminal Block Breakout Shield Module - for Arduino UNO R3. the item has been soldered and assembled..
- Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper..
- Standard IDC40 pitch 0.1" header, you can use 40pin FRC(flat ribbon cable) connector cable connect all Arduino Uno pins to peripheral equipment..
- With power on LED indicating. red reset button on the side. with a ICSP adapter connect header. FR-4 fiber glass PCB, dual copper layers..
- NOTE: the item not include Arduino Uno module..
Check Stock20-pin Headunit/Radio Wiring Harness with Steering Wheel Switch Wires Compatible with 2007-2019 Nissan | Upgraded Version of The Metra 70-7552 | Harness Includes VSS and SWC pins
- Harness includes VSS and SWC pins. This is an upgraded version of the Metra 70-7552. You must purchase an AXXESS ASWC-1 or similar steering wheel interface module to connect to this module. This harness only includes the wires that go to the steering wheel switches..
- This adapter is used to install an aftermarket Headunit/Stereo Receiver in a 2007-up Nissan..
- Dedicated ground and +12 Volt Accessory wires soldered in to power a steering wheel control interface module..
- High Quality ABS Plastic Molded Connector For The Perfect Fit..
- Pre-Stripped To Make Installation Quick And Easy..
Check StockRJ45 GPIO Pinout Breakout Board for Raspberry Pi 1A+ 1B+ 2B 3B 3B+ 3A+ 4B Zero-W
- 8 port(2x4) RJ45 8P8C sockets, with the module you can easily connect Raspberry Pi GPIOs and Power supply to peripheral devices through the RJ45 connector. The module support all 40pin Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B Zero, Zero-W..
- Each RJ45 port is connected Power Supply and GND. Each RJ45 can independently choose from the Raspberry Pi 5V / 3.3V, or from blue terminal block, to supply power to external devices. The 4 5 pin of all RJ45 ports are connected to the power supply(VCC, V+), and 7 8 pin connected to GND(0V)..
- RJ45 GPIO connects: Port 1: UART(RXD TXD) GPIO17 GPIO4. Port 2: SPI(SCLK CE0 MISO MOSI). Port 3: GPIO6 GPIO12 GPIO5 CE1. Port 4: GPIO21 GPIO26 GPIO20 GPIO19. Port 5: I2C(SDA, SCL) GPIO18 GPIO27. Port 6: I2C(SDA, SCL) GPIO23 GPIO22. Port 7: I2C(SDA, SCL) GPIO24 GPIO25. Port 8: I2C(SDA, SCL) GPIO13 GPIO16..
- 2x20pin expansion pin header, pin height 10mm/0.39".
- Packing list: 1x RJ45 breakout board, 4x brass standoffs, 8x M2.5x6 screws, 8x pin jumpers. (the item not include Raspberry Pi, RJ45 cable and plug).
Check StockAURSINC SHARI PiHat - Portable SA818 Ham Allstar Radio Interface Compatible with Raspberry Pi 2/3/4 | Raspberry Pi Hosted Allstar Node | UHF Frequency Range 1W 420-450MHz/70cm | Amateur Radio Operator
- SHARI PiHat uses 5 volts from the Pi, and the best place to measure it is from pin 8 (+5) to pin 9 (GND) of the SA818 module.
- [Feature 2] SHARI PiHat uses a single circuit board which contains installed surface mount (SMD) parts as well as 2 through-hole parts, a surface mount SMA connector and the SA818 (UHF) radio module.
- PiHatU also uses the Cmedia CM119B USB audio IC.
Check StockDZS Elec 6pcs 15CM 9V Battery Snap Connector Clip Lead Wire Experimental Battery Snap Power Cable With 5.5x2.1mm DC Male Plug for Arduino Project or LED Light Bar
- Type: 9V T Type Battery Snap Connector, to power anything that running with a 9V battery..
- Standard 5.5x2.1mm DC Male Plug, conveniently connect to other power module or Arduino board..
- Cable: Approx. 15cm (6 inch) length, red wire for positive, black wire for negative, easy to connect to other equipment..
- Application: Can be used for power supply or other 9V battery equipment, supplying power sourcec for Arduino Project or LED Light Bar etc. portable, easy to use..
- Package: 6pcs 9V T Type Battery Snap Connector with DC 5.5x2.1mm Male Plug (NO battery included).
Check Stock