Top Molybdenum Construction

Liqui Moly LM 48 Installation Paste 50g Tube Item

  • Lithium complex moly grease fortified with molybdenum disulfide (Moly) designed for heavy duty applications.
  • HeavyDuty Moly grease is an excellent choice for construction equipment, including Caterpillar specifications, requiring moly grease for pin and bushing applications.
  • Applications include hydraulic shovels, bucket pins and bushings, bulldozers, drag lines, dump trucks and other heavy-duty equipment with heavily-loaded pivot pins, excavators, king pins, skid steers, wheel and track loaders.
  • Ideal for heavy-duty, heavy-load-bearing applications operating in the adverse conditions found in agricultural, construction, landscaping, logging and mining environments.
  • Superior performance for fifth-wheel hitch plates, heavy-duty over-the-road trucks and trailers, king pins, municipal service vehicles, pivot pins, refuse haulers, sewer and septic trucks, snow removal vehicles, spring pins, steering linkages, universal joints, utility fleets, water pump bearings and other greased heavy-duty components, wheel bearings, demolition equipment, airport support vehicles and more..
Check Stock

TEKTON 1 Inch Drive Deep 6-Point Impact Socket Set, 9-Piece (1-2 in.) | 4892

  • Includes 9-pc. 1 in. drive deep 6-pt. impact sockets: 1, 1-1/8, 1-1/4, 1-3/8, 1-1/2, 1-5/8, 1-3/4, 1-7/8, 2 in..
  • High-torque, 6-point sockets grip flat sides of fasteners, not corners, preventing round-off.
  • High-contrast permanent laser etched size markings are easy to read, even in low light.
  • Premium chrome molybdenum steel construction with corrosion-resistant black phosphate finish.
Check Stock

MIXPOWER Low Profile Impact Triple Square Bit Socket Set, Solid One Piece Construction, M4- M18, Chrome Molybdenum Steel, 9 Pieces Set

  • 【Premium CR-MO】Made of premium impact grade chrome molybdenum steel construction with black phosphate finish for durability..
  • 【High-torque】Solid one piece construction eliminates weak points and increases durability. Provides the strength and flexibility to handle high torque impact..
  • 【Set Includes】 1/4'' Dr. Bit : M4, M5, M6, and M8, 3/8'' Dr. Bit: M10, M12, MT14, 1/2'' Dr. Bit: MT16 MT18.
  • 【Easy to Organize】It comes with a durable blow-molded carrying case for easy transportation, safe storage and quick organization..
  • 【Service Guarantee】All MIXPOWER Tools meet or exceed ANSI performance standards. It comes with 1 year quality guarantee..
Check Stock

Yaxell Ran Plus 8\ Kiritsuke Knife - Made in Japan - 67 Layers VG10 Damascus

  • Constructed of Japanese VG10 Cobalt Molybdenum Vanadium stainless steel.
  • Japanese kanji is hand engraved on the blade.
  • Features 34 layers of hard and soft stainless steel on each side, resulting in 69 layers total.
  • Black resin and linen Canvas Micarta handle with two stainless steel rivets.
  • enclosed full tang handle construction ensures strength, durability and balance.
  • clean with warm water and mild detergent.
  • Handcrafted in Seki City, Japan with a lifetime warranty.
Check Stock

Yaxell Ran Plus 6\ Utility Knife - Made in Japan - 67 Layers VG10 Damascus

  • Constructed of Japanese VG10 Cobalt Molybdenum Vanadium stainless steel.
  • Japanese kanji is hand engraved on the blade.
  • Features 34 layers of hard and soft stainless steel on each side, resulting in 69 layers total.
  • Black resin and linen Canvas Micarta handle with two stainless steel rivets.
  • enclosed full tang handle construction ensures strength, durability and balance.
  • clean with warm water and mild detergent.
  • Handcrafted in Seki City, Japan with a lifetime warranty.
Check Stock

Yaxell Ran Plus 6.5\ Nakiri Knife - Made in Japan - 67 Layers VG10 Damascus

  • Constructed of Japanese VG10 Cobalt Molybdenum Vanadium stainless steel.
  • Japanese kanji is hand engraved on the blade.
  • Features 34 layers of hard and soft stainless steel on each side, resulting in 69 layers total.
  • Black resin and linen Canvas Micarta handle with two stainless steel rivets.
  • enclosed full tang handle construction ensures strength, durability and balance.
  • clean with warm water and mild detergent.
  • Handcrafted in Seki City, Japan with a lifetime warranty.
Check Stock

CTA Tools 2476 E10 U-Joint Socket - 1/4" Drive , Gray

  • Engineered for use with impact drivers, This axle nut socket can be used for the removal or installation of axle nuts..
  • Manufactured from premium impact grade chrome molybdenum steel construction with corrosion-resistant black phosphate finish for durability..
  • High-torque, 6-point opening grips flat sides of fasteners, not corners, preventing round-off.
  • Large, high-contrast size marking is permanently laser etched and easy to read, even in low light.
  • Meets or exceeds ANSI performance standards. It comes with 1 year quality warranty..
Check Stock

TEKTON 3/4 Inch Drive 6-Point Impact Socket Set, 8-Piece (2-1/16-2-1/2 in.) | 4893

  • Includes 8-pc. 3/4 in. drive 6-pt. impact sockets: 2-1/16, 2-1/8, 2-3/16, 2-1/4, 2-5/16, 2-3/8, 2-7/16, 2-1/2 in..
  • High-torque, 6-point sockets grip flat sides of fasteners, not corners, preventing round-off.
  • High-contrast permanent laser etched size markings are easy to read, even in low light.
  • Premium chrome molybdenum steel construction with corrosion-resistant black phosphate finish.
Check Stock

Yaxell Ran Plus 8\ Chef's Knife - Made in Japan - 67 Layers VG10 Damascus

  • Constructed of Japanese VG10 Cobalt Molybdenum Vanadium stainless steel.
  • Japanese kanji is hand engraved on the blade.
  • Features 34 layers of hard and soft stainless steel on each side, resulting in 69 layers total.
  • Black resin and linen Canvas Micarta handle with two stainless steel rivets.
  • enclosed full tang handle construction ensures strength, durability and balance.
  • clean with warm water and mild detergent.
  • Handcrafted in Seki City, Japan with a lifetime warranty.
Check Stock

Yaxell Ran Plus 10\ Chef's Knife - Made in Japan - 67 Layers VG10 Damascus

  • Constructed of Japanese VG10 Cobalt Molybdenum Vanadium stainless steel.
  • Japanese kanji is hand engraved on the blade.
  • Features 34 layers of hard and soft stainless steel on each side, resulting in 69 layers total.
  • Black resin and linen Canvas Micarta handle with two stainless steel rivets.
  • enclosed full tang handle construction ensures strength, durability and balance.
  • clean with warm water and mild detergent.
  • Handcrafted in Seki City, Japan with a lifetime warranty.
Check Stock

Yaxell Ran Plus 4.75\ Petty Knife - Made in Japan - 67 Layers VG10 Damascus

  • Constructed of Japanese VG10 Cobalt Molybdenum Vanadium stainless steel.
  • Japanese kanji is hand engraved on the blade.
  • Features 34 layers of hard and soft stainless steel on each side, resulting in 69 layers total.
  • Black resin and linen Canvas Micarta handle with two stainless steel rivets.
  • enclosed full tang handle construction ensures strength, durability and balance.
  • clean with warm water and mild detergent.
  • Handcrafted in Seki City, Japan with a lifetime warranty.
Check Stock

Yaxell Ran Plus 6\ Chef's Knife - Made in Japan - 67 Layers VG10 Damascus

  • Constructed of Japanese VG10 Cobalt Molybdenum Vanadium stainless steel.
  • Japanese kanji is hand engraved on the blade.
  • Features 34 layers of hard and soft stainless steel on each side, resulting in 69 layers total.
  • Black resin and linen Canvas Micarta handle with two stainless steel rivets.
  • enclosed full tang handle construction ensures strength, durability and balance.
  • clean with warm water and mild detergent.
  • Handcrafted in Seki City, Japan with a lifetime warranty.
Check Stock