Top Monero Mining Softwares

8 GPU Mining Rig Frame Case - Complete Mining Rig System for Cryptocurrency Ethereum Miner with 1800W/2800W Power Supply(176V-260V), Motherboard, CPU, RAM, SSD, 8 Adjustable Speed Fans (Without GPU)

  • 【Built in 1800W Power Supply】The mining machine system comes with 1800W (176V-260V) professional Low Decibel mining machine power supply (It will not work under 110V household voltage), the decibel is about 50dB, suitable for home use. Up to 90% power conversion efficiency, allowing you to enjoy mining and save your power consumption at the same time..
  • 【8 GPU slots】8 GPU slots in the mining rig frame case, and the 65mm gap between GPU ports makes it quieter and easier to cool. The mining case support 8 PCS 3060TI/3070/6800/6800XT 6900/6900XT GPU simultaneously. But It is recommended to run only 4 PCS 3080,3090. Note: GPU longer than 32 cm in length are unavailable..
  • 【8 Adjustable Speed Fans】The mining computer case is equipped with 8 PCS cooling fans.The design of one air volume in and one out, the air volume is sufficient and silent enjoyment, escort your graphics card. Fan controller can control the fan speed from 2500 to 4500 rpm, rotate the fan controller to the right to increase the speed..
  • 【Mining rig Including】Our 8 GPU mining rig frame includes 1800W Mining power supply, motherboard, Intel CPU, 128GB SSD, 4G RAM, 2500-4500 rpm cooling fan * 8, screws package. Note: The hard disk is not equipped with a system. After you log in to ....
Check Stock

SUOHUI Ethereum Mining Rig Complete Mining Case for ETH/ETC Crypto Mining Prebuilt 8 GPU Mining Motherboard 1800W PSU 110v-220v 8 Cooling Fans 8GB RAM SSD CPU Excluding GPUs -Blue

  • ◀ Complete Installation, Start in Minutes： This GPU miner has installed high-quality mining hardware (without GPU) and Win10 English version....
  • ◀ Ultra-quiet Mining Power Supply: Built-in 4U 1800W full-voltage power supply, 110V-220V universal output to meet the use of different voltage....
  • ◀ 8 Controllable Cooling Fans: With each 4 cooling fans installed on the front and rear, the mining case fully allows the cold air in and hot air....
  • ◀ High-quality Mining Sever Case: The mining rig adapted sturdy and durable steel material to protect the GPU and electronic accessories. High....
  • ◀ SUOHUI complete mining rig case comes with an 8GPU mining motherboard, 1800W PSU, 8GB RAM, 128GB SSD, CPU (with the cooling system), 4USB ports,....
Check Stock

SUOHUI GPU Mining Rig Case for ETC AE Beam CFX ERG RVN SERO GRIN Crypto Miner Complete Mining System with 8 GPU Mining Motherboard PSU Cooling Fans RAM SSD CPU Excluding GPUs -Black

  • ◀ Complete Installation, Start in Minutes： This GPU miner has installed high-quality mining hardware (without GPU) and Win10 English version....
  • ◀ Ultra-quiet Mining Power Supply: Built-in 4U 1800W full-voltage power supply, 110V-220V universal output to meet the use of different voltage....
  • ◀ 8 Controllable Cooling Fans: With each 4 cooling fans installed on the front and rear, the mining case fully allows the cold air in and hot air....
  • ◀ High-quality Mining Sever Case: The mining rig adapted sturdy and durable steel material to protect the GPU and electronic accessories. High....
  • ◀ SUOHUI GPU mining rig case complete system supports mining cryptocurrency like Ethereum Classic ETC/ETH/Flux/Render Network/Akash Network/XRP and....
Check Stock

LEGO Superheroes 76020 Knowhere Escape Mission Building Set

  • Includes 3 minifigures with assorted weapons: Rocket Raccoon, the Sakaaran and Nebula, plus a figure: Groot. Also includes an orb.
  • Mining station features a tower with trap door and an exploding function, firing bazooka, catapult with fuel bombs,docking station for the mining pod.
  • Mining pod features a cockpit, grabbing claws and deployable fuel bombs. Weapons include Rocket Raccoon's space blaster, a space blaster and a sword.
  • Nebula minifigure and the Groot figure are exclusive to this set! Groot figure is fully posable with adjustable arms and legs.
  • Mining station measures over 6" high, 8" wide and 5" deep. Mining pod measures over 2" high, 2" wide and 3" deep. Groot stands over 5" tall.
Check Stock

Fanhasi 8 GPU Mining Rig Frame Case for ETH Crypto Miner with 8 GPU Mining Motherboard & 2000W Power Supply & 128GB SSD & 4G RAM & 8 Cooling Fans (Without GPU)

  • 8 GPU Slots Mining Rig System: Designed for Ethereum miner, you can put at most 8 Pcs GPU cards in the mining case. 65mm gap between each GPU ports gives the video cards enough space for air circulation for cooling. It's fit for most GPU card except 3060. NOTE: GPU cards are NOT Included.
  • 110V - 264V Input Power Supply: Built in 2000W PSU is designed for mining rig with up to 90% conversion efficiency. 110V - 264V universal AC input design allows you to enjoy mining at home easily. Without any modifying, it can work at a household voltage of 110V..
  • 8 Pcs Powerful Cooling Fans: This ETH mining rig case comes with 8 PCS adjustable cooling fans which help to accelerate air convection and keep the GPU card working at high performance. With the help of controller, you can control the fan speed to reduce the noise..
  • Case Type Mining Machine: The Ethereum miner case is made of high quality steel material which is sturdy and durable, can fully protect your GPU and electronic devices from damage. NOTE: GPU cards which are longer than 12.6 inch / 32cm in length are UNAVAILABLE for this mining rig..
  • Mining Rig Including: B75 motherboard, 2000W Supply Power (110V - 264V input ), CPU, 128GB mSATA SSD, 4G DDR3, 8 PCS 4500 RPM cooling fans. (NOTE: GPU cards are NOT Inc....
Check Stock

Blue Orchards Mining Fun Party Supplies Packs for 16 Guests! Mining Birthday Party Decorations Gamer Birthday Decorations Construction Birthday Party Pixel Gaming Party Decorations Pixel Mining

  • [AWESOME TABLEWARE] This awesome Mining Fun Standard Party Pack is the perfect complement to any pixel-themed, mining-themed, construction-themed....
  • [EVERYTHING YOU NEED] This Mining Fun Party Pack includes 16 9-inch paper dinner plates, 16 7-inch paper dessert plates, 20 paper lunch napkins, 16....
  • [COLORFUL AND EXCITING] You will love having these fun Mining Fun! construction party supplies for your big day and your guests will love them as....
  • [MAKE LASTING MEMORIES] Make lasting pixel mining birthday memories and breathe easy knowing this all-inclusive construction party supplies pack....
  • [POPULAR PARTY PACK] Get ready for a fun celebration when you decorate your big day with this Mining Fun Party Supplies Pack! Your guests are going to....
Check Stock

Kingwin Bitcoin Miner Rig Case W/ 6 GPU Mining Frame - Expert Crypto Mining Rack W/ Placement for Motherboard for Mining - Air Convection to Improve GPU Cryptocurrency Test Bench PC Case

  • ✅ OPEN AIR FRAME - Our high performance rig case comes with 4 fan slots for cooling (fans not included). Excellent equipment design to improve GPU....
  • ✅ DURABLE QUALITY - This stainless steel mining case is high durable to fit up to 6 GPUs. This material is durable to support any bitcoin mining....
  • ✅ HIGH POWERED - This mining rig has motherboard compatible power supply mounting (power supply not included) This crypto mining rig is an easy rig....
  • ✅ MUTLI COMPATIBILITY - This mining rig frame can support SSD & HDD installation with enough space between GPUs, for sufficient air flow. This is a....
  • ✅ GUARANTEED QUALITY - Bitcoin mining machine is guaranteed quality and performance or your money back..
Check Stock

SUOHUI Complete GPU Mining Rig Open-air Crypto Miner for Ethereum Mining Prebuilt 8 Slots Mining Motherboard,1800W PSU,4 Cooling Fans, 8GB RAM,128GB SSD, Win10 OS(Excluding GPU/1 Layer Miner)…

  • 【Professionally Installed and Test 】 This stackable miner is sturdy and durable with high-quality steel.Unique bottom plate not only for dust-proof and moisture-proof but also accelerate air convection and enhance heat dissipation. Fully protection for your GPUs and mining hardware..
  • 【8 GPU Mining Motherboard 】 Professional mining motherboard, designed for cryptocurrency mining. 8 NVIDIA or AMD graphics cards can be mixed use without additional GPU risers. 65mm spacing slot perfectly fits most GPUs and achieves high heat dissipation. Ensure better performance of GPU mining..
  • 【1800W Full Voltage Power Supply】 4U industrial control power supply, designed for GPU mining. The stable output of 1800W high power and conversion up to 90%. Available at 110V and 220V. 10 long-line power connection cables directly connect to the motherboard and GPUs. Reduce power loss and extend service life..
  • 【Ultra-quiet Controllable Cooling Fans】The mining machine has installed 4*4500 RPM silent GPU cooling fans and a fan speed controller. Controllable win speed allows accelerating airflow flexibility for optimal cooling. The professional mute design lets you easily enjoy the fun of mining at home..
  • 【Warmly Notes】: After receiving the miner, you need to conne....
Check Stock

Mining Rig Frame 8 GPU 70mm Slots with 8 Fans Crypto Ethereum Miner Case with Barebone Motherboard for ETH/ZEC Cryptocurrency System Machine with SSD/RAM Without GPU/PSU

  • 【8 GPU Mining Rig Parameter】Inter1(R) Celeron B75 Motherboard: 8X PCI-E spacing 70MM.
  • 【8 GPUs Support】8 GPU 75mm expansion slots in the mining computer case. The mining case support 8 PCS 3070/6800/6800XT 6900/6900XT GPUs....
  • 【8 Fans Support & Fan Controllers】 The cryptocurrency mining rig case is equipped with 8 PCS cooling fans. 4 fans pull the air in and other 4 fans....
  • 【4 USB Ports】 It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc. The miner case has 4 USB ports,....
  • 【Mining rig case】The rig doesn't come with GPU and PSU. Including: motherboard, CPU, power switch line, 128GB SSD, 4G RAM, 2500-4500 rpm cooling....
Check Stock

Kingwin Miner Rig Case W/6 or 8 GPU Mining Stackable Frame Expert Crypto Mining Rack for Ethereum Classic Flux Ergo Neoxa Ravencoin–Air Convection to Improve GPU Cryptocurrency Test Bench PC Case

  • ✅ OPEN AIR FRAME - Our high performance rig case comes with 7 fan slots for cooling (fans not included). Excellent equipment design to improve GPU....
  • ✅ DURABLE QUALITY - This aluminum stackable mining case is high durable to fit up to 8 GPUs. This material is durable to support any bitcoin mining....
  • ✅ HIGH POWERED - This mining rig has motherboard compatible power supply mounting (power supply not included) This crypto mining rig is an easy rig....
  • ✅ MUTLI COMPATIBILITY - This mining rig frame can support SSD & HDD installation with enough space between GPUs, for sufficient air flow. This is a....
  • ✅ GUARANTEED QUALITY - Bitcoin mining machine is guaranteed quality and performance or your money back..
Check Stock

8 GPU Mining Rig 68mm Slots, Crypto Ethereum Miner Frame with Barebone Motherboard for ETH/ZEC, Cryptocurrency Machine System Case with SSD/RAM (Without GPU/PSU)

  • 【Complete Mining Rig】 The miner is almost completed, The extras you need are a power supply, GPU, HDMI cable. It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc. Please ensure that all connection interfaces are in good contact to prevent the motherboard/GPU from overheating..
  • 【With 8 GPUs Motherboard】 The mining motherboard with 8 spaced expansion slots, 68 mm between each slot, allow you run 8 GPUs simultaneously. Compatible with 1660, 2070, 3080, 3090, RX580 and other series of graphics cards, But 3060 is not supported. The hash rate will be halved or even less. Note: GPUs longer than 35 cm in length are unavailable..
  • 【4 Fans Support】 The mining rig case is equipped with 4pcs 3000rpm cooling fans, which can provide airflow allowing for assistive GPU cooling..
  • 【Mining Technical Support】 Support OS/Windows, but for most graphics cards, the OS system will be relatively stable. Note: There is no system installed in the hard disk, you need to download it yourself. The mining machine is an item that requires technology. If you encounter technical trouble, please feel free to contact me and we will provide you with technical support..
  • 【Mining rig case package】 Including: motherboard, Intel CPU, 12....
Check Stock

8 GPU Mining Rig Frame 68mm Slots with 8 Fans, Cryptocurrency Mining Machine with Barebone Motherboard for ETH/ Ethereum, Miner Case with RAM, SSD

  • 【Complete Mining Rig】 The miner is almost completed, The extras you need are a power supply, GPU, HDMI cable. It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc. Please ensure that all connection interfaces are in good contact to prevent the motherboard/GPU from overheating..
  • 【With 8 GPUs Motherboard】 The mining motherboard with 8 spaced expansion slots, 68 mm between each slot, allow you run 8 GPUs simultaneously. Compatible with 1660, 2070, 3080, 3090, RX580 and other series of graphics cards, But 3060 is not supported. The hash rate will be halved or even less. Note: GPUs longer than 35 cm in length are unavailable..
  • 【8 Fans Support & Fan Controller 】 The cryptocurrency mining rig is equipped with 8 PCS cooling fans. 4 fans pull the air in and other 4 fans in the opposite direction pull the air out to keep GPU/motherboard/PSU cool. Fan controller can control the fan speed from 2500 to 4500 rpm..
  • 【Mining Technical Support】 Support OS/Windows, but for most graphics cards, the OS system will be relatively stable. Note: There is no system installed in the hard disk, you need to download it yourself. The mining machine is an item that requires technology. If you encounter technical trouble, please....
Check Stock