Top Mosfet Car Amplifier

CT Sounds AT-60.4AB 420 Watt Class AB Competition 4 Channel Car Amplifier

  • Equipped with a Diode 6A60 for reverse polarity protection along with a 4-way protection circuitry.
  • sleep easy at night knowing your 4ch car audio amplifier is protected.
  • Built using an advanced PCB board featuring industry-leading capacitors, high quality transformers and cutting-edge inductors to ensure this 4ch car amplifier delivers the power you need to destroy the competition in the SPL lanes.
  • LED logo, plexiglass bottom, and reinforced tiffany style RCAs gives this car stereo amplifier a prestigious look that is guaranteed to turn heads.
  • Heavy duty heat sink design, high power MOSFET switching technology, and best in class internal components will ensure the amplifier for car speakers runs cool for even the most demanding playlists.
  • 4 channel amplifier car audio rated 75W @ 4-ohm x 4-ch (14.4v).
Check Stock

Xtenzi Amplifier Remote Bass Level Control Volume Knob XTBR25 Compatible with Alpine RUX-Knob2 Amp.

  • Car audio amplifier with 2000 watts RMS power at 1-ohm load (14.4v).
  • Frequency response: 0 to 320 Hz (Bass Knob Included).
  • Small footprint and compact chassis makes this mono amplifier easy to install in any vehicle or car audio application.
  • but don’t let the size fool you, this 2000 watt amplifier absolutely pounds.
  • Engineered to be the most efficient car monoblock amplifier in its class so that you can get the most out of your vehicle’s electrical system.
  • MOSFET pulse width modulated power supply and proprietary heat dissipation design will ensure the amplifier for car subwoofers runs cool for even the most demanding playlists.
  • 4-way protection circuitry features high voltage, low voltage, over current, and high-temperature protection.
  • sleep easy at night knowing your class d amplifier car audio is protected.
Check Stock

Lanzar 2-Channel High Power MOSFET Amplifier - Slim 6000 Watt Bridgeable Mono Stereo 2 Channel Car Audio Amplifier-Crossover Frequency and Bass Boost Control RCA Input,Line Output - Lanzar VCT2610

  • 3000W RMS / 6000W MAX POWER: The Lanzar 6000 watt 2 channel high power MOSFET amplifier is perfect for your car stereo entertainment system. It can give 3000W x 2 output at 4 ohms or 6000W x 1 bridged output at 2 ohms for a high quality audio.
  • MOSFET POWER SUPPLY: This powerful amplifier is equipped with metal oxide semiconductor field-effect transistors to quickly switch from full to non-conduction for high efficiency output.
  • SHORT CIRCUIT PROTECTION: This 2 ch amp is also equipped with a 2x40 amp maxi type fuse to protect the amplifier and the electrical system of your car from thermal / overload / short circuit conditions.
  • SLIM SIZE DESIGN: Measuring only 10.63''W x1.78''H x 21.97''L, this amplifier has a slim size design and comes complete with all required mounting hardware for easy installation.
Check Stock

CT Sounds ATv2-125.4D 4-Channel 800-Watt Class D Competition Car Amplifier

  • 4 channel amplifier car audio rated 125W @ 4-ohm x 4-ch (14.4v).
  • Built using an advanced PCB board featuring industry-leading capacitors, high quality transformers and cutting-edge inductors to ensure this 4-channel car amplifier delivers the power you need to destroy the competition in the SPL lanes.
  • LED logo, plexiglass bottom, and reinforced tiffany style RCAs gives this car stereo amplifier a prestigious look that is guaranteed to turn heads.
  • Heavy duty heat sink design, high power MOSFET switching technology, and best in class internal components will ensure the car amplifier runs cool for even the most demanding playlists.
  • Equipped with a Diode 6A60 for reverse polarity protection along with a 4-way protection circuitry.
  • sleep easy at night knowing your 4ch car audio amplifier is protected.
Check Stock

4-Channel High Power MOSFET Amplifier - Slim 2000 Watt Bridgeable Mono Stereo 4 Channel Car Audio Amplifier w/ Crossover Frequency and Bass Boost Control, RCA input, and Line Output - Lanzar VCT4110

  • 1000W RMS / 2000W MAX POWER: The Lanzar 2000 watt 4 channel high power MOSFET amplifier is perfect for your car stereo entertainment system. It can give 500 W x 4 output at 4 ohms or 1000 W x 2 bridged output at 2 ohms for a high quality audio.
  • MOSFET POWER SUPPLY: This powerful amplifier is equipped with metal oxide semiconductor field-effect transistors to quickly switch from full to non-conduction for high efficiency output.
  • SHORT CIRCUIT PROTECTION: This 4 ch amp is also equipped with a 2x30 amp maxi type fuse to protect the amplifier and the electrical system of your car from thermal / overload / short circuit conditions.
  • SLIM SIZE DESIGN: Measuring only 10.63'' W, 1.78'' H, and 14.02'' L, this amplifier has a slim size design and comes complete with all required mounting hardware for easy installation.
Check Stock

Lanzar Amplifier Car Audio, 2 Channel, 1,000 Watt, 4 Ohm, MOSFET, RCA Input, Bass Boost, Mobile Audio, Amplifier for Car Speakers, Car Electronics, Crossover Network (HTG237) , BLACK

  • AUDIO EVOLUTION: This car speakers amp features regulated MOSFET Pulse Width Modulated that maintain rated power over a wide range of battery voltage. Excellent frequency response rates place these amps in a class of their own..
  • SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. Nickel-plated RCA connectors and speaker screw-down terminals ensure a secure connection between amplifier and speakers that allow distortion-free sound..
  • INTELLIGENT DESIGN: The car audio amplifier 2 channel safety features include power and protection LED indicators.
  • and thermal, overload, and speaker-short protection..
  • RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal. This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp..
  • POWER INPUT: The mosfet amplifier connections are for input power, chassis ground,& remote turn-on function. Use 8 gauge wiring for power & ground connections. The terminals will handle up to 4 gauge wiring with no negative effect or distortion of audio..
Check Stock

CT Sounds AT-500.1D 700 Watt Class D Competition Mono Amplifier Car Audio

  • Mono amplifier with 500 watts RMS power at 1-ohm load (12.8v).
  • Frequency response: 10Hz to 250Hz (Bass Knob Included).
  • Equipped with 4-way protection circuitry along with a Diode 6A60 for reverse polarity protection.
  • sleep easy at night knowing your car audio amplifier is protected.
  • Built using an advanced PCB board featuring Korean capacitors, high quality transformers and cutting-edge inductors to ensure this car amplifier class d delivers the power you need to destroy the competition in the SPL lanes.
  • Internal wiring features 8AWG OFC cables for enhanced electric current allowing this car amplifier monoblock to deliver louder, cleaner, and more punchy power than other car mono amplifiers in its class.
  • Heavy duty heat sink design, high power MOSFET switching technology, and silicon utilized throughout the internal components will ensure the class d amplifier car audio runs cool for even the most demanding playlists.
Check Stock

Hifonics 4 Channel Car Amplifier – Class A/B Gemini Series Multichannel Amplifier 1400 Watt Car Electronics Audio Subwoofer 2 Ohm Stable Bass Boost MOSFET Power Supply for Speakers Sub Amp

  • Power – This Class A/B 1400 Watt Car Amplifier has a power rating distribution as followed 350x4 @2 Ohms, 175x4 @4 Ohms. The 4 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design..
  • Features – The 4 channel bass boost car amplifier has features like - Frequency Response: 10-22KHZ, Bass Boost, Remote Bass Knob, 2-way protection, variable low pass crossover: 40Hz-300Hz, variable high pass crossover: 40Hz-300Hz, subsonic filter:10Hz-40Hz, phase shift:0-180 degree, and ultra-fi mosfet power supply.
  • Class A/B – This multichannel subwoofer car amplifier for car stereo exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class B amplifier has no current flowing..
  • Quality - This Class A/B 4 channel car amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others..
  • RCA Ports - The RCA Jacks in this bass boost car amplifier allows you to develop multiple amplifier systems without using any splitter cords. The subwoofer amplifier thus puts you at ease....
Check Stock

Recoil Universal Bass Knob Level Controller with Built-in Digital Voltmeter, Blue LED Display, Remote Gain Control, On/Off Switch, Prevent Damage to Your Audio Equipment

  • Car audio amplifier with 1500 watts RMS power at 1-ohm load (14.4v).
  • Frequency response: 0 to 320 Hz (Bass Knob Included).
  • Small footprint and compact chassis makes this mono amplifier easy to install in any vehicle or car audio application.
  • but don’t let the size fool you, this 1500 watt amplifier absolutely pounds.
  • Engineered to be the most efficient car monoblock amplifier in its class so that you can get the most out of your vehicle’s electrical system.
  • MOSFET pulse width modulated power supply and proprietary heat dissipation design will ensure the amplifier for car subwoofers runs cool for even the most demanding playlists.
  • 4-way protection circuitry features high voltage, low voltage, over current, and high-temperature protection.
  • sleep easy at night knowing your class d amplifier car audio is protected.
Check Stock

Audiotek AT4000M 1 Channel Monoblock Car Amplifier - 4000 Watts 2 Ohm Stable LED Indicator Bass Knob Included Mosfet Power Supply Great for Subwoofers

  • 1 Channel Monoblock Car Amplifier - 4000 Watts | 2 Ohm Stable.
  • Bridgeable MOSFET Amplifier | Tri-mode capable | Heavy-Duty aluminum alloy heat sink.
  • Class A-B Operation | Continuously- Variable low pass crossover: 0 to +18dB | Remote Subwoofer control.
  • Nickel Plated RCA and Speaker level inputs | Remote turn-on/turn-off circuit | MOSFET pulse width modulated power supply.
  • Thermal and Speaker Short protection Circuitry | LED Power and protection indicators.
Check Stock

Audiotek AT1600M 1 Channel Monoblock Car Amplifier - 1600 Watts 2 Ohm Stable LED Indicator Bass Knob Included Mosfet Power Supply Great for Subwoofers

  • 1 Channel Monoblock Car Amplifier - 1600 Watts | 2 Ohm Stable.
  • Bridgeable MOSFET Amplifier | Tri-mode capable | Heavy-Duty aluminum alloy heat sink.
  • Class A-B Operation | Continuously- Variable low pass crossover: 0 to +18dB | Remote Subwoofer control.
  • Nickel Plated RCA and Speaker level inputs | Remote turn-on/turn-off circuit | MOSFET pulse width modulated power supply.
  • Thermal and Speaker Short protection Circuitry | LED Power and protection indicators.
Check Stock

Gravity 6000.1D Class D Car Audio Amplifier – 3000 Watts True RMS @ 1 Ohm Max Power at 6000W, 1/2/4 Ohm Stable, Digital, Monoblock, Mosfet Power Supply, Great for Subwoofers

  • Class D Amplifier 3000W RMS @ 1 Ohm, 2200W RMS @ 2 Ohm, 1500W RMS @ 4 Ohm. Bass Knob Included.
  • Small footprint and compact chassis makes this mono amplifier easy to install in any vehicle or car audio application.
  • but don’t let the size fool you, this 6000 watt amplifier absolutely pounds.
  • Engineered to be the most efficient car monoblock amplifier in its class so that you can get the most out of your vehicle’s electrical system.
  • MOSFET pulse width modulated power supply and proprietary heat dissipation design will ensure the amplifier for car subwoofers runs cool for even the most demanding playlists.
  • 4-way protection circuitry features high voltage, low voltage, over current, and high-temperature protection.
  • sleep easy at night knowing your class d amplifier car audio is protected.
Check Stock