Top Motor Control Board

INTLLAB High Flow Corrosion Resistant Vacuum Peristaltic Self-Priming Pump with Stepper Motor 12V/24V High Flow Peristaltic Pump, DP-520-48S

  • Volts:DC 24V，Flow rate:110 mL/min，Speed:350rpm,Pharmed BPT tube：3.2mm ID × 6.4mm OD.Working temperature: 0~40℃，Relative humidity 003c80%，Rotor:3 rotors..
  • Suitable for the transmission of viscous and non-viscous liquids, stepping motor, high precision..
  • Pump tube material: Pharmed BPT tube，tube service life＞1000H.It has very good chemical resistance.Operating temperature range -51℃~132℃..
  • Note: The stepper motor needs to be used with the control board, and the speed control can be carried out through the control board..
  • Application: accessories for Filling packaging，Experiment，Laboratory，research institutes，Food and beverage..
Check Stock

BIQU LCD 12864 Version Graphic Smart Display Controller Module with Adapter and Cable for RAMPS 1.4 Reprap 3D Printer Kit

  • 2560 control board: The board is a microcontroller board based on the 16AU .It has 54 digital input/output pins (of which 14 can be used as PWM....
  • RAMPS 1.4: RAMPS interfaces an for Arduino with the powerful for Arduino platform and has plenty room for expansion. The modular design includes plug....
  • LCD 12864 with Controller: This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You....
  • A4988 driver module: A4988 Stepper Motor Driver Board is a breakout board for Allegro?ˉs A4988 DMOS Microstepping Driver with Translator and....
  • Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver. (More generally, rewiring anything while it....
Check Stock

BIGTREETECH SKR V1.4 Turbo Control Board 32bit for 3D Printer Compatible with TFT35 E3 V3.0.1/TFT70 Touch Screen Support TMC2209/TMC2208/TMC5160/TMC2130 for Most FDM 3D Printer (with 5*TMC2209)

  • ✨BIGTREETECH SKR V1.4 Turbo using 32-bit 120MHz ARM-class Cortex-M3 series LPC1769 main control chip, the performance is greatly improved..
  • ✨SKR V1.4 Turbo control board can supply power to TFT screen, BLtouch, Neo-pixel by plugging in an external DC5V power module.
  • in addition, I2C, SPI, WIFI interface is reserved to facilitate customer DIY..
  • ✨On-board TMC-driven SPI working mode and UART working mode, and the on-board DIAG function pins are convenient for customers to use, eliminating the complicated wiring process, which can be used by simply removing and inserting the jumper cap..
  • ✨Compare to other stepper motor driver in the market, our TMC2209 silent stepper driver generate lower heat and it has a large-area cooling position to lower the temperature. It driver can lower 30% heat than others stepper motor drivers even working last for a long time. With Passive cooling on a 10 hours print, they only hit 37℃..
  • ✨BIGTREETECH TMC2209 V1.2 is an ultra-silent motor driver IC for two-phase stepper motors, which adopts stealthChop2 Mute technology which reduces motor noise ....
Check Stock

52 Inch White Ceiling Fan with Lights, 10-speed Adjustable Low Profile Ceiling Fan with DC Reversible Motor, Smart Ceiling Fan Controlled by Remote, APP, Alexa, Siri & Google Home

  • ...ely. We used a high display index LED board as the light source of our ceiling fan with remote. This light board is durable for about 50,000 hours lifespan and can product your eyes from lighting damage. It also provides 3 color modes and 1-100% brightness dimmable range for all occasions..
  • MULTI-CHANNEL FOR A FULLY CONTROL: There are 5 ways for you to control this low profile fan completely. As a smart ceiling fan, you can adjust this flush mount ceiling fan with simple sentences by Alexa, Siri and Google Home. For example, "Alexa, set the ceiling fan in bedroom to speed 8.”. In another way, you can take full control of this modern ceiling fan with our APP also. With the remote control, you will not lost control to this black ceiling fan even when the WiFi signal lost..
  • SELF-DEVELOPED DC MOTOR: Comparing with the traditional AC motor, the efficiency of our self-developed DC motor is 75% higher. Our DC motor can provide a stronger airflow with less power requirement. It offer 10 variable speeds to our outdoor ceiling fan with light. The airflow is up to 4700 CFM. You can select the downdraft airflow in summer or updraft airflow in winter with our remote control or the APP instead of climbing on the ceiling fan with light to change the airflow directi....
Check Stock

RioRand 400W 6-60V PWM DC Brushless Electric Motor Speed Controller with Hall

  • 1.Humanized design,the interface adopts binding posts,standard heat sink,integrated speed regulating potentiometer on the board,it can be used when the power is on,save time and effort..
  • 2.Full patch technology,stable performance,with forward and reverse, brake function.Electric Motor Speed Controller Brushless Controller with Hall..
  • 3.Wide voltage 6-60V high power 400W DC three-phase brushless with Hall controller..
  • 4.High-power 400W DC three-phase brushless with Hall controller, support PLC 0-5V analog control, support PWM control, amplitude 2.5-5V.
  • 5.There are three relatively thick phase wires on the motor, and there are also three phase wire interfaces on the driver board. They are marked with the characters of MA, MB, MC and other similar characters, and they are also connected respectively..
Check Stock

sb components Raspberry Pi Pico Board with Pico Motor Driver HAT Connects 2 DC and 1 Stepper Motor DC Motor Control Module for Raspberry Pi Pico, Raspberry Pi Pico Kit

  • Raspberry Pi Pico is Raspberry Pi's first microcontroller board, designed especially for physical computing.
  • It can be easily reprogrammed over USB from a Raspberry Pi or other computer using the C/C++ SDK or the official MicroPython port.
  • Pico Driver Motor HAT is a DC motor control module that is powered by one H-bridge IC L293D with the motor input supply range 6 V-24 V.
  • Pico Driver Motor HAT is specifically made to work with the Raspberry Pi Pico Board.
Check Stock

FURITEK Iguana 20A/40A Brushed ESC for AXIAL SCX24 with Bluetooth Combo

  • The FURITEK IGUANA esc is designed to work with BOTH stock brushed motor and sensored/sensorless brushless motors of your favorite on the Axial SCX24 crawlers..
  • Designed with FOC (Field-oriented control) technology, it provides insane slow speed with powerful stable torque, low noise, high efficiency, and has a high-speed dynamic response..
  • And with bluetooth module option, you can run telemetry and all amazing parameters on smart phone apps..
  • The difference between this IGUANA esc and TEGU Main Board for Axial SCX24 Crawler is that the TEGU main board includes servo out for extra application and LED control capability which the IGUANA does not have. The IGUANA also has smaller BEC than the TEGU..
  • - Support sensorless brushless DC and brushed DC motor (config via app, default is brushed).
Check Stock

3D Printer Controller Kit RepRap RAMPS 1.4 + 2560 Board + 5pcs A4988 Stepper Motor Driver with Heatsink + LCD 12864 Graphic Smart Display 3D Printer Controller Kit

  • 2560 control board: The board is a microcontroller board based on the 16AU .It has 54 digital input/output pins (of which 14 can be used as PWM....
  • RAMPS 1.4: RAMPS interfaces an for Arduino with the powerful for Arduino platform and has plenty room for expansion. The modular design includes plug....
  • LCD 12864 with Controller: This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You....
  • A4988 driver module: A4988 Stepper Motor Driver Board is a breakout board for Allegro?ˉs A4988 DMOS Microstepping Driver with Translator and....
  • Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver. (More generally, rewiring anything while it....
Check Stock

RAMPS 1.4 Controller + MEGA2560 R3 Board + 5pcs Soldered A4988 Stepper Motor Drivers + 5pcs Heat Sinks + 19pcs Jumpers with USB Cable for RepRap 3D Printer Kit

  • SAVING SPACE: The RAMPS 1.4 board is designed to fit the entire electronics needed for a RepRap in one small package. So it can save space and cost..
  • SCALABLE: RAMPS interfaces an Mega with the powerful MEGA platform and has plenty room for expansion. A number of expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack..
  • EASY TO USE: Using the bootloader, you can download the program directly via USB without using other external writers. Development IDE interface is based on open-source principles, allows you to free download for use in project work, school teaching, motor control, interactive works..
  • MODULAR DESIGN: The modular design includes plug in stepper drivers and extruder control electronics on an MEGA shield for easy service, part replacement, upgrade-ability and expansion..
  • POWER SUPPLY AND DRIVER: Supply part of the optional USB power, or as an external power using the AC-to-DC adapter and battery. This stepper motor driver lets you control one bipolar stepper motor at up to 2 A output current per coil..
Check Stock

Commercial Sliding Gate Opener Eagle-2000 FR 1/2 Horse Power Motorize Slide Gate Operator for Large 45’ feet Gates or 1000lbs Weight Capacity with 2 Wireless Remotes, 1 Receiver, and Photo Eye.

  • The Eagle-2000FR- 1/2 Motorized Slide Gate Operator is designed for Commercial Large Gates up to 45’ feet and 1000lbs weight capacity. Build with a Heavy Duty idler wheels making the opener quiet and smooth when operated..
  • Package Kit Includes – Eagle-2000FR Slide Gate Motor Operator, 2 Wireless Visor Transmitters Remotes, 1 Long Range Receiver, (2) 10ft Nickle Plated Chain, and 1 Reflective Photo Eye. We also provide a 5-Year Limited Manufacturing Warranty..
  • Easy to Install – The Industrial Gate Opener is designed with The Eagle Diamond Board the most advanced and user friendly control board in the market. The Gate Systems control board is equipped with features like Anti Tailgating, Partial Open and Auto Close Timers..
  • Safety – Built with a Foot Pedal Release Mechanism. In case of an emergency or a power outage the foot pedal provides the Sliding Gate Operator to be operable manually by simply pushing the gate open. It also Includes a lighting and surge protection built in..
  • Hardware – The Sliding Gate Operator System has a 1/2 Heavy Duty Horse Power Motor making it ideal for heavy vehicle traffic properties. Additionally, it is built with an Open/close delay and Motor brake disengaging chain mechanism..
Check Stock

YOLUFER 500W Brushed DC Motor Speed Controller Alloy Brush Motor Control Box Throttle Twist Grips E-Bike Scooter Tricycle Speed Controller Motor 24V 36V 48V

  • Superior Circuit Board: The speed controller is made of high quality circuit board, featuring high efficiency, high torque, low heat, reverse polarity protection and high current protection level, and has a long life span to last for a long time..
  • Perfect Right Hand Grip: The grip has a stable and sensitive control, which can provide stable and sensitive speed control and a very comfortable grip..
  • Good Performance: It can provide better and comfortable operation for your electric car, high efficiency, high torque, high power, low noise, high heat dissipation, and you can set the direction of rotation to complete the reversal of motor direction..
  • Easy to use: Easy to install, each port has a corresponding English label for your convenience, suitable for 500W 24V/36V/48V brushed motor..
  • Scope of Application: Suitable for electric bicycle, electric tricycle, electric scooter, electric bicycle, can adjust the motor speed very well..
Check Stock

ProForm Performance 300i Treadmill

  • Access iFit account from computer, tablet, or Smartphone.
  • 5 inch high contrast multi color display, 16 on board workouts, EKG grip Pulse heart rate sensor, 2.5 HP Mach motor.
  • 16 x 50 inches tread belt, 0 to 10 MPH digital quick speed control, 0 to 10 percent digital quick incline control.
  • Adjustable proshox plus cushioning, SpaceSaver design, integrated device shelf, audio auxiliary port, out of box easy assembly.
  • The 305 cst is protected with a 5 year frame & motor warranty, and 90 day parts & labor warranty.
  • Built with the whole family in mind, the 305 cst treadmill accommodates upto 300 pounds.
Check Stock