Top Mould For Auto Parts

4 Pack Tray Silicone Molds

  • What you will receive: the package comes with 5 pieces of round coaster resin moulds, 5 pieces of square coaster resin moulds, 2 pieces of silicone coaster storage box mould in rectangle and round, sufficient quantities and proper combinations will satisfy your various DIY needs in daily life.
  • Quality material: these epoxy casting moulds are made of silicone material, they are lightweight, reliable and reusable, they can withstand temperature from minus 40 to 446 degrees Fahrenheit, you can use them for a long time, and they are non-toxic, safe and tasteless, easy to clean with warm soapy water.
  • Simple to use: our round and square resin moulds set has smooth interior, so they are easy to demould, you just need to put the required filler into the mould, wait a while until the resin is completely cured, and gently twist the mould to push it out without tearing easily, while maintaining the shape of the mould.
  • Size of products: the diameter of round craft resin coaster mould is approx. 9 cm/ 3.54 inches, the size of the square coaster silicone mould is approx. 9 x 9 cm/ 3.54 x 3.54 inches, the round coaster holder silicone mould measures about 4 x 10.5 cm/ 1.57 x 4.13 inches, and the size of rectangle coaster storage box silicone mould is approx. 4 x 7 x 1....
Check Stock

MITREAPEL Autobond Super CA Glue (1.4 oz) with Spray Adhesive Activator (6.7 fl oz)-Auto Parts Cyanoacrylate Glue Great for Auto Modification Parts and Repairs, Fixing of Moving and Vibrating Parts

  • Best for Auto Parts & Aftermarket Parts - Our glue with activator is ideal for use in most car and auto applications. This glue & spray activator will quickly form a lasting bond between two surfaces. This auto parts glue is a must have for mechanics and car geeks..
  • Easy to Apply - Spread 3-4 drops of AutoBond Glue per square inch on one surface & spray a thin coat of the activator on the other surface, wait 10 seconds before bonding and finally bond the parts together. It Our auto parts glue will keep everything in its place!.
  • Special Thicker Formula - Some two part super glues are thin and runny, making them complicated to use. Our CA glue features a medium to thick and viscous liquid making application much easier. This adhesive is usable for different needs on modification, repair, aftermarket, mechanical parts, accessories, interior & exterior and vibrating parts..
  • Quickly Cures in Seconds - In just seconds, our super glue and accelerator spray will have a strong bond, and it dries clear. When used with the activator, the auto glue dries in 5-12 seconds while without the activator it takes just min....
Check Stock

3 Shapes Storage Box Resin Moulds with Lids Crown Resin Jar Mould Jewelry Jar Silicone Mould Jewelry Ring Box Epoxy Mould Storage Bottle Casting Moulds for DIY Container Soap Candle Trinket Making

  • Nice combination: the package comes with 3 shapes storage box resin moulds with lids, including 1 crown resin jar mould, 1 vintage stripe edge box resin mould, 1 mini jewelry box mould, different styles for you to choose, allow you have a interesting making time.
  • DIY as you want: you can DIY your own jar with different options like glitter powder, mica powder, liquid resin dye or dried flowers and so on, to make a nice home decor or a gift for your family and friend by your imagination.
  • Reliable quality: made of silicone material, smooth and washable, you can clean and store the jewelry jar silicone mould easily, saving you much time and energy.
  • Easy to release: our jewelry ring box epoxy mould is easy to operate, you just need to twist the mould and release your creation out of your mould after the resin is completely cured.
  • Your piece comes out easily, no sticking, no tearing while the mould maintains its shape.
  • Functional usages: ideal for making craft projects and jewellery DIY storage box, gift box, candy box, candlesticks, items containers, flower pot or other items, the finished crafts will also be beautiful decorations for your home, office, shop and other places.
Check Stock

747R Beechwood Bending Stick

  • Ideal for polishing and buffing on plastics, metals, jewelry and other small parts. Used primarily with polishing bits and accessories..
  • Substantially better durability and more cut than cloth wheels.
  • A felt accessory continually renews its own surface while being used..
  • With different sizes of diamond grinding paste, agent, oil, use special tools to achieve the best light effect.
  • grinding stone bits can make the polished item clean and bright, ideal for various of mould, glass, metal etc..
Check Stock

4 Pieces Mushroom Shaped Silicone Mould Mushroom Cake Moulds Vegetable Fondant Candy Moulds for Chocolate Candy Ice Cube French Dessert Cake Decoration

  • Package includes: you will get 4 pieces funny shape silicone moulds in 3 different shapes.
  • The size of each mould is different, please refer to the picture for the specific size carefully before purchasing.
  • Reliable material: made of quality silicone material, these mushroom chocolate mould trays are durable, non-toxic, odorless, heat resistant and reusable, so you can rest assured to use them to make various kinds of food.
  • Mould trays are able to be applied in oven, microwave, dishwasher and fridge.
  • Smooth and non-stick: the surface of silicone mould is smooth, non-stick and flexible.
  • And the mushroom-shaped dessert will pop up by pressing the mould with your fingers, easy to demould and also convenient to clean with water.
  • Wide range of usages: these silicone moulds are suitable for baking mousse, cake, French dessert, chocolate, ice cube, candy, cheese cakes, fondant, chocolate, candy, cake decoration, soap, candle, wax and more.
  • Cute shape design: silicone chocolate mould is well designed as many mushroom shapes, cute and lifelike.
  • With this vivid 3D mould, your baking will be more fun and memorable, and desserts made with it will be loved by your friend and family.
Check Stock

Silicone Mold Gnome Mold 3D Gnome Mold Epoxy Dwarf Plaster Mold for Soap DIY Paint Your Own Gnome Resin Making Wax Ceramic Polymer Clay 1

  • Package contents: you will receive 1 piece of pink gnome mould in pink color.
  • The size of the mould is about 10 cm/ 3.94 inches in height, 4.5 cm/....
  • Serviceable material: our gnome silicone mould is made of quality silicone, which is reliable, not easy to deform, tear and break, and can keep for a....
  • Easy to apply: you only need to put the resins or other materials into the Christmas silicone mould and wait for them to solidify.
  • Match with your DIY crafts: you can use the silicone mould to make a variety of dwarfs and print different patterns or letters on them, making....
  • Wide applications: this dwarf silicone mould can be compatible with different resins, concrete, perfumed soaps and other materials.
Check Stock

Ice Roller for Face, Black Facial Ice Roller Mould, Silicone Face Ice Cubes for Skin Care and Pain Relief, Reusable DIY Facial Care Ice Mould

  • 【Easy to Make Ice & Demould】After frozen for no less than 12 hours in the environment below -10℃, submerge one end of the lid of the frozen ice mould under running water for 30 seconds, and then easily remove the lid horizontally..
  • 【Anti-Spill Design】We added a high quality silicone sealing ring to the seam in the middle of the ice mould, which can enhance the sealing performance of the ice mould and prevent the water in the mould from overflowing..
  • 【Good for Skin Care】The face roller with ice on the face can Improve puffiness, Moisturizing before makeup, Soothes and repairs after sun exposure, Shrink pores and tighten skin and Improve fine lines. Different DIY beauty materials can be matched according to your needs. (Such as Cherry Tomatoes, Milk, Rose, Cucumber, Lemon ect).
  • 【Also Good for Pain Relief】This ice mould is a very practical must-have gadget at home. In addition to good for facial rejuvenation, you can Use this ice mould to ice compresses for relieving physical discomfort. (Such as Toothache, Headache, Fever and Sprain ect).
  • 【Practical Gift】This ice mould is approx. 2.2 x 1.6 x 3.9 inch which is very comfortable to hold, small and light design, and easy to grasp, also the ice roller hea....
Check Stock

PROXXON Table Saw FET, 37070, Green

  • The ideal machine for model building, picture-framing, dollhouses, birdhouses and other intricate projects.
  • For fine mechanics, model building, mould construction, toy manufacture, architects, model carpenters and fitters.
  • For cutting wood, non-ferrous metals, plastics, Plexiglas, fiber-glass reinforced sheets, foam and many other materials.
  • Stable construction because load bearing parts and plane-milled table are made of die-cast aluminium.
  • Scope of delivery: 1x PROXXON Table Saw FET including tungsten tipped saw blade, vacuum cleaner adapter. Part number: 37070.
Check Stock

WICHEMI Commercial Popsicle Mold Stainless Steel Ice Pop Molds 20PCS Ice Lolly Popsicle Mould Ice Cream Maker Mold Stick Holder with Lid Single Cup Capacity 108g

  • ✔ HIGH QUALITY MATERIAL: Created using industrial grade Stainless Steel and excellent quality popsicle mould, durable for longtime use..
  • ✔COMPACT DESIGN - Each Ice Popsicle mould is designed for easy removal and refilled at a time. It can be store individually in the freezer to save space. Comes with Stainless steel mould holder base, popsicle can be safely placed on it, convenient to take out and share your homemade popsicle with friends..
  • ✔EASY TO USE & CLEAN: Fast freeze frozen ice pop maker is easy to clean up due to the durable and rust-resistant stainless steel. Fast freeze mould is easy to use, easy to clean, and will last you a life time..
  • ✔ WIDELY USAGE: Ice cream mould helps you to make a delicious spring and summer treats using juices, purees, yogurt, applesauce, fruit, ice cream and pudding..
  • ✔PACKAGE INCLUDE:1x Ice Pop Mould (1xCleaning Brush + 100xReusable Bamboo Sticks + 50xPlastic Bag)..
Check Stock

Gildan 100% Cotton Long-Sleeve T-shirt (G2400) Tee Medium Dark Chocolate

  • Made of high quality PC material, easy to clean..
  • Great for making handmade chocolate, candy, jelly, cake decorating, etc. Professional chocolate tools. NOT suitable for microwave oven, toaster..
  • Shoe mould size: 8.5"( L ) X 3.9"(H)/21.5cm X 10cm..
  • Easy to wash and clean after use. This Mould is durable for long time use..
  • 2 Cavities per mould. Use clips to hold mould after pouring melted chocolate..
Check Stock

7 Pieces Silicone Resin Casting Moulds Set, Include 2 Universal Lighter Protective Cover Resin Mould Square Coaster Silicone Mould Spice Grinder Epoxy Mould for DIY Craft

  • Package quantity: package comes with 5 pieces silicone resin casting moulds, including 2 x universal lighter protective cover resin mould, 1 x square coaster silicone mould, 1 set of spice grinder epoxy mould, enough for you to make desired crafts.
  • Size detail: the universal lighter protective cover resin mould measures approx. 6.6 x 3.5 cm and 5.2 x 3.5 cm, the square mould is about 9.5 cm in diameter, and the grinder epoxy mould is about 6 cm in diameter, please allow a little error on the size due to manual measurement.
  • Durable material: these resin casting moulds are made of durable silicone material, not easy to break, durable to serve you for long time, and with smooth interiors, reducing the need to cut back and polish the finished resin crafts, easy to release after the resin is fully cured.
  • DIY you own craft: these epoxy DIY moulds are compatible with epoxy resin, wax, soap and other materials, add some sequins, resin dyes, dried flowers and other decors into the mould, to make practical coasters, cup mats, wall decorations, hanging ornaments, home table decors, art works and other DIY projects.
  • Nice gift choice: you can send our silicone resin moulds set to others who are DIY lovers as gifts, or send the finished products to your lover, friends....
Check Stock

4 Pieces Cylinder Candle Moulds Taper Candle Moulds Pillar Candle Casting Moulds Plastic Candle Making Moulds with 3 Candle Wicks 3 Wooden Candle Wick Holders 20 Candle Wick Stickers, 4 Sizes

  • Candle making tools: there are 2 pieces cylinder candle moulds and 2 pieces taper candle moulds, 3 pieces 16.4 ft long wicks, 3 pieces wooden candle wick holders, as well as 1 sheet candle wick stickers including 20 pieces, reasonable collocation can make your candles making process smoother and more convenient.
  • Size details: the candle making moulds come in 4 different sizes, approx. 0.87 x 3.94 inch, 0.87 x 5.9 inch, 1.97 x 3.94 inch and 1.97 x 2.95 inch, different sizes can meet your varied DIY candle making needs.
  • This mould can be taken for paraffin, wax, palm wax, beeswax candle making.
  • Wooden candle wick holders packaged together can hold the candles well and prevent the candles from tilting during the production process, bring much convenience to your candle making process.
  • Durable material: our candle making moulds are made of quality PC material, which can withstand frequent usage due to its durability to high and low temperatures, you can use them with confidence to make your desired candles without worrying about the quality, and keep them for long lasting application.
  • Material and design: each candle mould is composed of two parts, the core part and the lid, which is designed for conveniently taking out your candle.
Check Stock