Top Mounted Amplifier

Rockville RG212CA Dual 12 inches Slim Vented Powered Car Subwoofer Enclosure 2000 Watt

  • Features of RG212CA v2: Rockville RG212CA v2 Dual 12" Slim Vented Powered Car Subwoofer Enclosure, Complete all in one system includes built in amplifier, top quality enclosure, and dual 12” subs, Vinyl finished enclosure with side vents tuned to 40Hz, Enclosure is built with ¾” MDF and is ribbed and braced, 2000 Watts Peak power output, 500 Watts RMS, 12“ Super-Slim Subwoofer, Ultra-Stiff Composite Pulp Cone with Kevlar Reinforcement, 3D Molded Acrylic Dust Cap, Expanded & Rolled Steal Basket.
  • High Density Laminated Rubber Surround, High Power Strontium Magnet with Ultra Saturated High BL Motor Structure, Vented Core Magnet Motor Structure, 2” High Temperature Aluminum Voice Coil, 8 mm Washer & Yoke Plates, 13.6 mm Peak-to-Peak X-Max, 40 oz. Magnet, Slim Vented MDF Enclosure Design, Impedance: 4-ohms, Frequency response: 30Hz-500Hz, SPL @ 1w/1m: 89dB, Dimensions: 29.52" Length x 15" Height 4.37" Top Depth x 6.65" Bottom depth, Unit Weight: 40.12 Lbs.
  • Amp Features: Built-in 500 Watts RMS / 2000 Watt Mono Block Amplifier, 2 Ohm stable amplifier, Class D amplifier, Extruded aluminum heatsink stays cool even at high volumes, 200mV – 5V Variable Input Level.
  • 12dB Low Pass Crossover Frequency 50Hz-200Hz, Low Level RCA Inputs, Remote level attenuat....
Check Stock

One For All 17411 Rural Line Pro Outdoor HDTV Antenna

  • Multidirectional antenna receives over-the-air TV signals with a range of 75 miles, Can be mounted indoors or outdoors.
  • IP55 rated to be anti-dust and water resistant, high-performance amplifier boosts incoming over-the air broadcast signals.
  • Amplifier module installs indoors and can be powered via a USB port on your TV or standard AC wall outlet (USB-to-AC power adapter included).
  • 3G/4G/LTE filter shields unwanted signals for reduced interference.
  • Included are a 30-foot coaxial cable and brackets for mounting on a flat surface wall or pole.
  • Antenna: 7-7/16"W x 12-9/16"H x 2-7/16"D, One year warranty.
Check Stock

Hifonics ALPHA Super D-Class® Hybrid 5 Channel Amplifier

  • Low Noise Preamplifier Circuitry - Maximum low voltage signal from the source unit comes into the amplifier through a low voltage circuit which....
  • Temperature Controlling Heat Sink - The ultra-fine MOSFET designed specifically for music production helps limit distortions and effectively cools the....
  • High Quality Output Connections - The connections can affect audio quality which is why we designed the Best, with nickel plated high temperature....
  • Bass Remote Included - Adjust the Bass frequencies from the control which can be mounted anywhere in your vehicle. Create a custom look with the....
  • Automatic Turn On - Directly wired into your source unit, this allows the amplifier to power up with your vehicle. This is beneficial to more....
Check Stock

Memphis Audio VIV900.5 75W x 4 + 500W x 1 Car Amplifier

  • Features: 5-channel car amplifier, 50 watts RMS x 4 + 300 watts RMS x 1 at 4 ohms / 100 watts RMS x 4 + 500 watts RMS x 1 at 2 ohms / 150 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 at 2 ohms, Class D amp technology.
  • Tuning Controls: front channels: Variable high- or low pass filter (10-5,000 Hz, 24 dB/octave).
  • Rear channels: Variable high-pass filter (10-500 Hz, 24 dB/octave) / Variable low-pass filter (50-5,000 Hz, 24 dB/octave) / Bandpass filter engages both.
  • Subwoofer channel: Variable subsonic filter (10-80 Hz, 24 dB/octave) / Variable low-pass filter (50-500 Hz, 24 dB/octave) / Variable bass boost (0-18 dB at 45 Hz).
  • Other Features: Optional wireless remote subwoofer level control available, Preamp inputs, Speaker-level inputs (require speaker wire to RCA adapters), Hinged magnetic cover plate conceals top-mounted controls, 7 color selectable LED logo, 4-gauge power and ground leads and a 80-amp fuse recommended — wiring and hardware not included with amplifier, No onboard fuses — when installing multiple amps in a system, an additional 80-amp in-line Fuse between the distribution block and this amplifier is.
Check Stock

Amplifier Power Cable Cord Compatible Guitar Amp, ION iPA76C iPA76A iPA76S IPA23 Block Rocker, Block Party & Live, Job Rocker, Explorer Portable Speaker System 3-Prong Wall Power Cable Plug

  • Compatible with: ION Block Rocker, ION iPA76 iPA76A iPA76C iPA77 iPA76S IPA23 Block Rocker, Block Party & Live, Job Rocker, Explorer Portable Speaker System. Marshall Amplifiers, Combo Amplifiers, Amplifier Heads..
  • 3 Prong Power Cable Also Work With Guitar Amplifier Musical Amp: Fender Electric Guitar Amplifier, Marshall Amplifier and Most Models of Desktop Computer, HD TV, Led LCD Monitor, Ceiling Mounted Projector, Powered Speakers and More (Please check the connector port)..
  • Power Specs: 3 Prong Extra Long 6 Feet AC Power Cord for Instant Pot, 18 AWG Universal Power Cord, 3-Pin Shroud Female (IEC320 C13 / IEC C13) to 3-Prong Grounded Plug Male (NEMA 5-15-P). Rated to carry: 18 AWG x 3C - 10A - 125V..
  • UL Listed: Tested, Approved and Certified by UL. UL & RoHS Certified 18AWG x 3C Overheating Protection, Overload Protection AC Wall Power Cable Cord Plug..
  • Reliable and Friendly Customer Service Response Within 24 Hours. 30 Days Money-Back, 12 Months FREE Exchange..
Check Stock

Herdio 5.25 Inch Ceiling Speakers 600W 2-Way Flush Mount with Bluetooth Wall Mount Amplifier Receiver Perfect for Home Theater Bathroom Living Room Kitchen Office 4 Speakers

  • 【Bluetooth Connection 】Independent 4-channel wall-mounted Bluetooth amplifier designed for one set of 4 in ceiling speakers so that bring you....
  • 【150 Watts Each 】The Herdio Blutooth Ceiling Speakers Max Power up to 600 Watts ,and the highlight of this 5.25" speakers' design is the rich....
  • 【More Functions with Amplifier】MIC IN /USB /AUX IN Function: The in wall amplifier features USB flash memory reader for media playback which also....
  • 【Easy Install & Dimension】The HCS528-16BT-4CH-US use flush mount design allow for easy in-wall/in-ceiling installation.Stylish white appearance is....
  • 【Package Include & Service】5.25" speakers x 4 , Speakers Connection Wires x 2, in-wall bluetooth audio receiver wall plateX1,Power adapater X 1 In....
Check Stock

Monolith M8250x 8x200 Watts Per Channel Class-D Multi-Channel Home Theater Power Amplifier with XLR Inputs Hypex NC502MP

  • Hypex Ncore Modules: The Monolith Class D amplifiers utilize Hypex NCore high end, audiophile grade Class D amplifier modules that offer you all the power you need in a multichannel system! The Monolith Class D amplifiers can clearly and accurately articulate the quietest passages, the loudest passages, and everything in between..
  • Chassis Mounted XLR Inputs: The XLR inputs on the Monolith 8250X are mounted directly on the chassis, not on a separate internal circuit board. This allows for a firmer connection that won't come loose or break over time..
  • Smaller Chassis. Lighter weight. The Monolith Class D Amplifier comes in a three rack unit height (3RU) enclosure and weighs about 35 pounds for easier placement and rack mounting..
  • Rated at a full 200 watts per channel into 8 ohms and 400 watts per channel into 4 ohms, capable of driving the most demanding home theater systems and reproducing the most dynamic soundtracks, while also articulating all the subtle sonic details found in music..
  • Supercharge your existing receiver or create the foundation of a no compromise home theater....
Check Stock

Indoor Outdoor High Gain Signal Amplifier HDTV VHF UHF FM Channel Boost

  • Perfect for improving reception if you live on the fringe of a broadcast area or if your TV signal is blocked by concrete walls.
  • Amplifies HDTV, VHF, UHF and FM signals. Gain Control gives you the ability to fine-tune reception for each station.
  • On/Off FM Trap cuts FM interference so it doesn't disrupt television reception. Dual outputs for connecting up to two separate TVs or receivers.
  • Outdoor amplifier mounts to antenna mast. Indoor amplifier sits on a flat surface or can be mounted to the wall.
  • Gold-plated connectors help improve signal and reduce interference. Includes 75 ohm terminator, AC adapter, two 6" coax cables and U-bolt.
Check Stock

GE Outdoor HD Digital TV Antenna Amplifier, Low Noise Antenna Signal Booster, Clears Up Pixelated Low-Strength Channels, Supports HD Smart TV VHF UHF, Coax HDTV Connector/AC Adapter, Black, 42179

  • SIGNAL BOOSTER – This amplifier will enhance and strengthen the signal received by your outdoor non-amplified, passive TV antenna. Amplifiers will clear up any low-strength, fuzzy, or pixelated channels – in some cases, the number of channels you receive may change depending on your distance from the local broadcast towers..
  • WEATHER RESISTANT DESIGN – Durable build is intended for outdoor installation and placement in the best location to minimize interference from building materials and walls. This amplifier can be mast-mounted, wall-mounted, or used indoors..
  • EASY TO INSTALL – Includes power inserter, power supply, zip ties (4), rubber boot (2), and clear and simple-to-read user manual and installation instructions..
  • U.S.-BASED TECHNICAL SUPPORT – Backed by a limited-lifetime replacement pledge and free U.S.-based technical support that is available Monday – Friday, 7AM-8PM, Central Time to assist with any questions or issues..
Check Stock

45W HF Power Amplifier For YASEU FT-817 ICOM IC-703 IC-705 Elecraft KX3 QRP Ham

  • hf power amplifier，for QRP transceiver， Improve signal。Can be used both as a base and mobileunit,Extremely Small Compact and lightweight ， Full integration with the FT-817 using the supplied interface cable, The amplifier incorporates various protection circuits such as high VOLTAGE，front mounted LED display..
  • This amplifier can be successfully used with other QRP rigs such as the ICOM IC-703(and Elecraft KX3)..
  • YAESU FT-817ND Quick operating manual: 1. Connect power cord to DC power supplier, Red to "+", Black to" -" 2. Connect ACC cable to FT-817 ACC and amp 3. Adjustment “BAND ADJ” button， Select the band..
  • 4. Connect antenna to amp "ANT" and "input" from FT-817 antenna out. Notice! The antenna you used that should well tuned, the SWR should less than 1:1.5 5. Open the power on both power supplier and AMP. The power indicate on. 6. Power on FT-817, the band indicate on Amp shoule be on..
  • 7. Press PTT, the TX indicate on Amp should be on.Notice! If working on FM or SSTV for long operating time, should lower the output power on FT-817, say 2.5W or 1W..
Check Stock

Power Acoustik RZ4‐2000DSP Razor Series 2,000-Watt Max 4-Channel Class D Amp with DSP and Bluetooth

  • Features: Power Acoustik RE1-3000D 3000 Watt Mono Car Amplifier. Monoblock (1 Channel) Full Range Operation 2-Ohm Stable Class A/B Amplifier. MAX Power: 3000 Watts. 4 Ohm RMS: 750 Watts.
  • 2 Ohm RMS: 1500 Watts. Direct Short, Thermal, & Overload Circuits Protection. 200mV-6V High Level or Low Level RCA Input. Variable 12dB High, Low, & Subsonic Crossovers.
  • 12dB Bass Boost Increases Low Octave Harmonics. Direct Wire 4ga. Power & 12ga Speaker Terminals. Dash Mounted Remote Gain Control. Product Dimensions (L x W x H): 14" x 8.5" x 2.2" inches.
Check Stock

Philips Outdoor HD TV Antenna Amplifier with Signal Strength LED, Improve Low-Strength Pixelated Channels, Digital VHF UHF Signal Booster, for Passive Antennas, Weather Resistant, SDV9119N/27

  • PATENTED SIGNAL FINDER LED – This amplifier features patented, built-in LED Signal Finder Technology to identify the best location and orientation of your outdoor or attic TV antenna to provide optimal reception..
  • WEATHER-RESISTANT DESIGN – Designed to withstand the elements, this durable amplifier is easy to install, can be placed in the best outdoor location to minimize interference from building materials and walls, and can be mounted on an exterior mast or wall – or used indoors..
  • 4G/5G LTE FILTER – Designed for use with all antenna brands, this outdoor amplifier’s TruAmp Technology includes a built-in 4G/5G LTE filter that blocks unwanted cell phone interference and boosts the signal for enhanced, clear, pure reception of HDTV, VHF and UHF channels..
  • IMPORTANT NOTE – Using an amplifier does not guarantee that you will receive more TV channels, but it will strengthen the signal of available channels that your antenna is already receiving. The number of channels and the reception quality you receive will vary based on distance from broadcast towers, antenna position and obstacles, including hills, buildings and trees..
  • U.S.-BASED TECHNICAL SUPPORT – Backed by a limited-lifetime replacement pledge and free U.S.-based technical support tha....
Check Stock