Top Mounting Plates

2 PCS Universal Wood Bed Rail Hook Plates for Beds Frame Bracket Headboard Footboard with Pin Replacement Wooden Bed Parts or New Bed Constructions

  • Function：This hook plate is intended as a replacement for hook plates which have been damaged or for new bed.
  • Versatile：7 Hole Design Ensures Compatibility for ALL Wood Bed Rails，and it is the standard configuration for most American-Made beds..
  • The mounting holes for the pins are 11/32" in diameter，the two pins in your headboard/footboard to confirm that they are 2" apart on center . Tips:Please measure the distance to make sure it can match..
  • Material：Thickening galvanized plates can resist rust and corrosion..
  • Packing included：one item includes two hook plates and four mounting pins.
  • another one item includes four hook plates and eight mounting pins.
Check Stock

POROHOM 4 PCS Universal Wood Bed Rail Hook Plates for Beds Frame Bracket Headboard Footboard with Pin Replacement Wooden Bed Parts or New Bed Constructions

  • Function：This hook plate is intended as a replacement for hook plates which have been damaged or for new bed.
  • Versatile：7 Hole Design Ensures Compatibility for ALL Wood Bed Rails，and it is the standard configuration for most American-Made beds..
  • The mounting holes for the pins are 11/32" in diameter，the two pins in your headboard/footboard to confirm that they are 2" apart on center . Tips:Please measure the distance to make sure it can match..
  • Material：Thickening galvanized plates can resist rust and corrosion..
  • Packing included：one item includes 4 hook plates and 8 mounting pins.
  • another one item includes four hook plates and eight mounting pins.
Check Stock

QLLY 8 inch Adjustable Metal Furniture Legs, Replacement Leg for Sofa Couch Chair Ottoman Cabinet, Set of 4 (Black)

  • SIZE: Height: 8 inches/20.3cm (with mounting plate), screw mechanism on the bottom can adjust about 1 inch/2.5cm, mounting plate is about 0.4 inch/1cm height. Diameter: 2 inches/5cm. Weight: 0.84LB/0.38KG (One Leg). If the size is inaccurate, please contact us for free replacement..
  • NOTE: Some threads of the table legs are not perfectly vertical. You need to screw hard so that mounting plates can give the threads some pressure to make them vertical. OR try different furniture legs and mounting plates combination. If they don't work, please contact us for free replacement..
  • MATERIAL: These Furniture legs are made of Strong Metal, they are Heavy Duty. One single Leg holds up to 220 lbs. Its Surface is treated by electrostatical spray and is odorless and eco-friendly..
  • PACKAGE: 4 x Furniture Leg, 20 x Screws, 4 x Mounting Plates. If you find that the product is damaged or missing parts, please contact us for free replacement..
  • APPLICATION SCENARIO: Great for Sofa, Couch, Chair, Ottoman, Furniture, Cabinet, Shelves. Easy to install..
Check Stock

UCTRONICS 19 inch 3U Rack Mount for Raspberry Pi 4, with 8 Mounting Plates, Extendable to Support 12 Units of All Raspberry Pi B/B+ Models

  • This 19 inch rackmount is specifically designed to house 1-8 Units of Raspberry Pi 4 B, can be extended to support 12 units of 4B, 3B+, and other B models, much more than 1U rack. NOTE: It only comes with 8pcs mounting plates, if needed, please order others separately..
  • Standard 3U Size: 19"×5.25"(482.6×133.35mm), fully compatible with 19” server racks, had no issue plugging this into the 3U rack space..
  • Easy to Install: 4 slots on every mounting plate for raspberry pi 4B boards, and 2 mounting holes to the rack on the side, fixed with included screw.
  • the rack can be vertical fixed on the mounting rail (the rack mount screw is not included)..
  • Quality Built: Every piece is made of nice and sturdy gauge of 1.2mm carbon steel, matte black powder coat finish, have nothing breaking off, paint chips, sharp exposed edges (plate corners are rounded off smooth)..
  • Package Includes: 1 piece 19" 3U rackmount for Raspberry Pi.
  • 48 screws. NOTE: The blank cover, Micro HDMI adapter, and Pi 4 board are not included.
  • If needed, please search for ASIN B08N66BCXR, B08KXZHD9P, and B08N665CHL to order the blank cover, Micro HDMI adapter and mounting plates separately..
Check Stock

MEICOCO Heavy Duty Wood Bed Rail Hook Plates for Beds Frame Bracket Headboard Footboard Replacement Wooden Bed Parts or New Bed Constructions Set of 4

  • Bed Rail Hook Plates are intended as a replacement for hook plates which have been damaged or for new bed construction where hook plate installation is desired..
  • These hook plates are made with 13 Gauge steel and are the standard configuration for most American-Made beds.hook plates and pins are made of premium steel coated with zinc for rust and corrosion resistance..
  • Please measure the distance from the two pins in your headboard/footboard to confirm that they are 2" apart on center to determine if this hook plate will work in your application..
  • The mounting holes for the pins are 11/32" in diameter. Eight Mounting Pins are included with this item.#10 Wooden Bed Rail Hook Plates,Set of 4,Bed Hooks with pins for Wooden Bed,Wooden Headboard,Footboard Frame,Claw it On intended replacement for Bed Hook #10 Plates,or for new bed constructions.
  • Complete set of 4 pieces of premium heavy duty hook plates with 8 pins..
Check Stock

4 Pack Ethernet Wall Plate 1 Port Keystone Jack Blue Cat6 RJ45 Coupler Outlet Connector with Single Gang Low Voltage Mounting Bracket

  • ...e wall plates provide comprehensive solution for networking, audio, video and more DIY project of your home and office..
  • Package Include : 4.5 x 2.7 inch standard size wall plates, 4 x Rj45 cat6 blue keystone Jack, 4 x 1-port white wall plates, 4 x 1-gang black low voltage mounting bracket. And with mounting screws..
  • Easy to Install : You just need a screwdriver to complete the wall plate installation. You can finish in a few minutes. Easy replacement of the same configuration wall plates. Cat6 are female to female, just plug one cable into the front end and one into the back. Use it with a 1Gang low voltage mounting bracket..
Check Stock

11 Degree Angled Leg Mounting Plates, Furniture Leg Attachment Plates Industrial Strength T-Plate M8 Sofa Legs with Hanger Bolts,Screws,Set of 4

  • 11 DEGREE ANGLED.Strengthen/ Repair Furniture- No more wobbly legs ! This furniture leg attachment plates are designed for attaching legs to new or damaged sofas, couches, seats, ottomans and more. NOTE: THEY ARE 11 DEGREE ANGLED.Your chair woods need NOT to cut in 11 degree in order to fit the mounting plates..
  • Industrial Standard – Each T-Plate is 2" by 2" (L x W) and 1/4" deep (approx). Plates have 5/16" threaded (metric M8) attachment holes for hanger bolts ,have 4 unthreaded holes(5mm)..
  • Easy Installation within Minutes - No need to purchase hanger bolts separately . You have EVERYTHING ready to install furniture legs feet!. Package includes all necessary parts- 4 sets of angled sofa leg mounting plates.
  • 16 pcs of screw adapters for 5mm unthreaded holes.(Metric M8 is Ikea standard)..
  • Convert to U.S. Standard Legs - If your sofa legs are pre-drilled for M10/M8 hanger bolts, these plates allow you to use metric 8mm and convert to U.S. Standard Legs by simply attach these mounting brackets over the hole in the furniture frame..
  • 4 sets pack.You have everything ready for the setup.Add them to your shopping cart and save more money!.
Check Stock

Beautiful Pink Cherry Blossoms Decorative Front License Plate Cover Vanity Tag Metal Car Plate Aluminum Novelty License Plate 6 X 12 Inch (4 Holes)

  • ...with premium inks that resist the environment, printed with state of the art digital printing technology to provide years of durability, no fading, unlike most other thin and fragile license plates..
  • Standard Dimensions: Our license plate measure 6 x 12 inches with slotted mounting holes at the top and bottom with the standard 4 holes to fit your vehicle. It fits all standard us license plates.No drilling is required, easy to install. ( Mounting hardware not included, please purchase the correct mounting hardware to install ) Note: please check the product image for frame size. please measure your license plate to make sure the upper or bottom lip of the frame won't cover the state name..
  • Fashion Patterns Design: Our license plate covers with eye-catching design, brilliant colors, and unique styles, which can create an impressive and bold look for your vehicle, highlighting your car. Among our front license plates, some of them are very popular, and it’s suitable for different car models, such as cars, off-road vehicles, trucks, tractors, RVs, Mpv, And Suvs..
  • Multifunction: These front license plates are the perfect ....
Check Stock

IKEA OLOV Adjustable Metal Table Legs - Steel White [Set of 4]

  • SIZE: Height: 28 inches/72cm (with mounting plate), screw mechanism on the bottom can adjust about 1 inch/2.5cm, mounting plate is about 0.4 inch/1cm....
  • NOTE: Some threads of the table legs are not perfectly vertical. You need to screw hard so that mounting plates can give the threads some pressure to....
  • MATERIAL: These Furniture legs are made of Strong Metal, they are Heavy Duty. One single Leg holds up to 220 lbs. Its Surface is treated by....
  • PACKAGE: 4 x Desk Legs, 20 x Screws, 4 x Mounting Plates（Wood board not included）. If you find that the product is damaged or missing parts,....
  • APPLICATION SCENARIO: Great for tables, desks, counter tops, kitchen tables. Easy to install..
Check Stock

Phantom 4 9450S Propeller Blade, 4pcs Replacement Spare Prop Blades for DJI Phantom 4 Accessories

  • 9450S propeller with mounting plate, only for DJI phantom 4..
  • Package includes: 2 pairs of propellers + 4 mounting plates..
  • These are not the OEM propellers and mounting plates.If you need to replace the propellers, please replace all four, otherwise your drone may appear unbalanced..
  • If you have any questions, you can contact us via email on Amazon..
Check Stock

14 Degree Angled Leg Mounting Plates Furniture Table Leg Attachment Plates Brackets T-Plate M8 Sofa Legs with Hanger Bolts,Converters, Screws,Full Set of 4

  • 14 DEGREE ANGLED. Strengthen/ Repair Furniture- No more wobbly legs ! This furniture leg attachment plates are designed for attaching legs to new or damaged sofas, couches, seats, ottomans and more. NOTE: THEY ARE 14 DEGREE ANGLED.Your chair woods need NOT to cut in 14 degree in order to fit the mounting plates..
  • Specification – Each T-Plate is 1.89" by 1.89" (L x W). Thickness 1.2mm. Plates have 5/16" threaded (metric 8mm/ M8) attachment holes for hanger bolts ,have 4 unthreaded holes(4.5mm)..
  • Easy Installation within Minutes - No need to purchase hanger bolts separately . You have EVERYTHING ready to install furniture legs feet!. Package includes all necessary parts- 4 sets of angled sofa leg mounting plates.
  • 16 pcs of screw adapters for 5mm unthreaded holes.(Metric M8 is Ikea standard)..
  • Convert to U.S. Standard Legs - If your sofa legs are pre-drilled for M10/M8 hanger bolts, these plates allow you to use metric 8mm and convert to U.S. Standard Legs by simply attach these mounting brackets over the hole in the furniture frame..
  • Application- Fit most sofa chair /couches/seats/ottomans/bench/ dresser/ end table and ottoman in market. Full 4 set pack.You have everything ready for the setup.Add t....
Check Stock

ICT Billet LS Intake Manifold Port Plate Dust Cover Plug Wash Paint LS1 LS3 LSX 551381

  • Includes: 2 mounting plates and mounting hardware.
  • Made in Wichita, Kansas From Aerospace Grade, USA Produced, Billet Aluminum.
  • Compatible with: all ICT Billet LS remote coil brackets.
  • Compatible with: all S10 trucks when ICT Billet S10 accessory brackets.
  • LS Mounting Base Plates (for Remote Coil Brackets on Engine Block) LS1 LS3 LSX.
Check Stock