Top Multi spindle Tapping Machine

Threading & Tapping attachment-lathe tailstock die holder set MT3

  • Made of High Quality Tool Steel , this is a high quality product for your lathe machine.
  • Used for threading and tapping purpose on the lathe machine.
  • Die Holder Sizes 13/16", 1" & 1-1/2" . Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
  • Comes in precisely ground MT3 Shank, that goes inisde your lathe tailstock & intended job for threading / tapping is hold in rotating chuck..
  • The Die for threading purpose is hold in the various Die holder sizes. The internal bore threading/ tapping is done by mounting the tap wrench head as....
Check Stock

Threading & Tapping attachment-lathe tailstock die holder set Machine Tools MT2

  • Made of High Quality Tool Steel , this is a high quality product for your lathe machine.
  • Used for threading and tapping purpose on the lathe machine.
  • Die Holder Sizes 13/16", 1" & 1-1/2" . Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
  • The Die for threading purpose is hold in the various Die holder sizes. The internal bore threading/ tapping is done by mounting the tap wrench head as....
  • Comes in precisely ground MT2 Shank, , that goes inisde your lathe tailstock & intended job for threading / tapping is hold in rotating chuck..
Check Stock

LiFuJunDong 4 Axis USB CNC6040 Router Engraving Machine 3D Milling Machine w/Controller 110V 1.5KW VFD Water-Cooling Router Engraving Machines for Metal, Wood, Glass and Plastic (6040 1.5KW 4AXIS)

  • ENGRAVING MACHINE PARAMETERS】 X, Y, Z Working Area: 600(Y)*390（X）*120(Z)mm Outside dimension: 865*680*570mm（L*W*H） Table size: 770（Y）*490（X）mm Lathe structure: 6061/6063 Aluminium alloy Max. Feeding height: ≤100mm Drive unit: X axis---1605 Ball Screws Y axis---1605 Ball Screws Z axis---1204 Ball Screws Sliding unit: X axis---High intensity Chromeplate shaft Y axis---High intensity Chromeplate shaft Z axis---High intensity Chromeplate shaft Stepping motor: 57 two-phase 3A 150N.cm.
  • SPINDLE MOTOR-1】 Outside dimension: 65*158mm Material: 304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacket VOLTS, current, power: AC110V, 60Hz, 5A, 1.5 KW VFD Spindle motor: 1.5 KW Water Cooled Spindle speed: 24000 rpm Max working frequency: 400Hz Principal axis collet: ER11collet, Standard configuration :6mm Nut Model: ER11-A Cooling: Water-cooling Speed ​​mode: By adjusting the VFD output voltage and operating frequency from 0-24000RPM.
  • SPINDLE MOTOR-2】Lubrication way: lubricated by high grease Repeat accuracy: 0.05mm Spindle precision: radial beat acuities 0.03mm Carving Instructions: G code / TAB files / nc file / NCC files Communication interface: through USB connection with computer Working Speed: 50-1500mm / min (differ....
Check Stock

LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK

  • LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK.
  • Made of High Quality Tool Steel , this is a high quality product for your lathe machine * Used for threading and tapping purpose on the lathe machine.
  • Die Holder Sizes 13/16", 1" & 1-1/2" . * Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
  • Comes in precisely ground MT2 Shank, that goes inside your lathe tailstock & intended job for threading / tapping is hold in rotating chuck. * The Die....
  • The internal bore threading/ tapping is done by mounting the tap wrench head as per tap size between the above advised range is moved toward the....
Check Stock

Jancy Slugger by Fein - JCM 256U Carbide Magnetic Drill - 1300 Watts, Power Output 730 Watts, Load Speed: 1st gear 120-240 RPM, 2nd Gear 260-520 RPM - 72704761120

  • HIGH PERFORMANCE - It is robust and gives superior performance with its 2-speed gearbox and outstanding functionality for universal and efficient use in the workshop..
  • FEATURES - Stable speed, even in the toughest applications. It has a fine drill spindle adjustment for convenient machine alignment and double drill motor guides to enable use of the largest core bits. It also comes with an integrated cooling tank..
  • SPECIFICATIONS - 1300 Watts, Power Output 730 Watts, Cutter Max Drilling Depth 2", Tapping 3/4", Magnetic Holding Force 3147 lbs, Cable with Plug 13.1 ft and Weight 35.49 lbs..
  • INCLUDES - 1 Case, 1 Coolant Tank, 1 Safety Strap, 1 Chip Hook, 1 Pilot Pin, 1 Touch Guard and 1 Drift Key..
  • TRUSTED BRAND - Fein is famous as a globally active company with German roots that stands for innovative and high-quality power tools and accessories, created for the toughest jobs in the industry to achieve the ultimate performance..
Check Stock

Milling on the Drill Press (DVD, 4 Hours)

  • 【Much More Powerful】The motor power of RCOG-25V milling drilling machine has a 1100W brushless spindle drive motor providing tremendous torque and variable speeds from 50-22250 RPM continuously, with overload and overheating protection fuction.The noise of this motor is very low and it is very easy to maintain.So much power will make your work much more efficient..
  • 【Parameters】Metric Scale MT3 Milling Machine adopts high precision grinding all steel spindle with excellent strength grinding gear,X axis:18.9",Y axis:6.9",Z axis:11",it has own DRO for 3 axis.Headstock swivels 360 degrees.Max drilling diameter:0.9",Max Face screening capacity:2.5",Max vertical milling capacity:0.79",Distance from spindle to table:13.8",Spindle taper:MT3,Table size:27.5"x7.1".The speed display shows inch..
  • 【Micro-Feed Precision】Benchtop Milling Drilling Machine has a micro-feed function,the accuracy is up to 0.01'', only need to tighten the middle nut of the right hand wheel to achieve the micro-feed function, loosen the nut to achieve the manual up and down movement function.Integrated cross worktable,width is widened,with high pr....
Check Stock

RATTMMOTOR 2.2KW CNC Air Cooled Spindle Motor ER20 80mm Spindle 220V High Speed 24000RPM 3HP 400HZ for CNC Router Engraver Milling Cutting Machine

  • The 2.2KW air-cooled spindle motor's 220V, 8.5A, 400HZ frequency, less than 0.05mm runout off, 0-24000RMP speed..
  • It should be noted that the spindle speed must be kept above 9000 rpm, otherwise the spindle will be damaged..
  • It is mainly suitable for non-metallic engraving,such as wood carving/engraving machine, advertisement engraving machine,CNC machine..
  • This spindle is designed with a dustproof and waterproof cover, the body is made of stainless steel, and the rear is equipped with a cooling fan,....
  • It contains 4 bearings, high-precision grinding taper hole, high-precision, low noise..
Check Stock

POSFLAG 1001046 Spindle Assembly Compatible with MTD and Murray 1001200, 1001200MA, 492574MA

  • Replace Murray 1001046 1001200 1001200MA 10001709MA 492574MA.
  • Fits Murray 38", 40", 42" and 46" decks from 1997-2001, Used for Low duty application.
  • Size: 5/8 inch Shaft O.D and 7 inch overall length..
  • Package Includes 1001046 spindle assembly with grease zerk ( No threads in housing, use self-tapping screws).
  • This is Aftermarket Prime Quality Product, undergone rigorously tested before sending out, Durable and easy to install and replace, our product will meet or exceed OEM standard,please check the picture, size, and OEM for compatibility before ordering..
Check Stock

CoCud Thread Milling Taps 1/4-32 UNEF Thread 2B High Speed Steel Machine 3 Straight Flutes Screw Threading Tool - Applications for Tapping Drilling Machine 1-Piece

  • ... Wide Application --- For threading through holes or shallow blind holes. 3 straight flutes design, rapid downward chip removal. Make new female threads or re-thread damaged female threads in stainless steel, ordinary steel, copper, aluminum, iron, alloy steel, plastic..
  • ★ Machine Taps --- Machine taps are used in tapping machines, vertical drilling and milling machines. M1-M3.5 micro taps process wood and soft metals with lower hardness, mainly used in clocks and watches. Drill holes with a twist drill before tapping..
  • ★ High Speed Steel --- The high speed steel tool has high hardness, high strength, good toughness, wear resistance, and heat resistance. Only the base substrate, without any additional coatings, good for a wide range of applications..
  • ★ Useful Tips --- Control speed based on material hardness. Add appropriate tapping oil for higher quality internal threads and more durable taps. The tapping depth should not exceed 1.5 times the diameter (eg: diameter=6mm (M6), maximum tapping depth=9mm). The tapping angle should be 90 degrees vertical and stable..
Check Stock

LAKIX CNC Router Machine, 4540 CNC Wood Router Machine with 500W Spindle 3-Axis Engraving Milling Machine for Woodworking Metal Acrylic MDF Nylon Carving Cutting Arts and Crafts DIY Design

  • ✅Powerful 500W Spindle : 3-Axis CNC router machine will allow you do both caving and engraving, with powerful 500w spindle 21000RP, will allow you to engrave more harder materials such as acrylic plastic and wood, meanwhile greatly improve work efficiency. Engineered for home and business use..
  • ✅2-in-1 Wood Carving and Engraving Machine : LAKIX CNC router milling machine compatible with spindles and laser module, will allow you do both engraving and caving, pls note our machine comes only 500w spindle , laser module is not included..
  • ✅ Large Engraving Area & Upgraded Offline Control : LAKIX CNC Router Machine has large effective engraving working area 430mm x 390mm x 90mm , LAKIX engraving machine cutter supports Win 7 / Win 8 / XP / Win 10 / Win 11, here is an option to use the offline controller that doesn’t require access to a computer..
  • ✅Sturdy Design : Excellent quality hardware,comes mostly pre-assembled aluminum metal structure , structured cabling, solid structure, smooth operation. The motor tolerates high speeds, will cut wood precisely and resists overload for a longer-lasting tool. It’s also quie....
Check Stock

US STOCK SFX M16R M3-M16 Electric Tapping Machine 1200mm Arm 360° Universal Electric Tapper 0-375RPM/min With 9pcs ANSI Imperial Collets Tap Collets

  • Tapping angle: Universal.Rotation Speed: 0-375r/min(Stepless Speed Regulation) Tapping Capacity Steel: M3-M16 Aluminum: M3-M16 Stainless steel: M3-M16 Working Area Horizontal: 1100mm(43.3inch) Weight: 32KG (70.5lb.)Vertical: 400mm adjustable.
  • Applicable material: alumimum, copper, steel, cast iron, Q235, S136, mold steel, 718H, 40Cr, stainless steel and other metal materials..
  • Standard Accessories Touch Panel Intelligent control system High-Precision Tapping Arm (One Set) 360° Universal Workhead Servo Motor And Reducer ( One Set). Universal Joint(Tapping For a Vertical/Horizontal ) Tap Holder M3-M16 (One Set)9pcs ANSI Collets:1/4", 5/16", 5/32 ",1/16", 3/16 ",7/32 ",3/8", 7/16", 1/2"..
  • Advantages:HD human-machine interface,adjustable speed.Imported servo motor with strong output force.Enhanced reducer with durable gears.Intelligent control system stable and reliable program.Safety torque collet,overload protection device.Deep-hole Tapping Hierarchically.Flexible cutting state,Save Cost..
  • Free Shipping.ETA:7-12 days.No Import Duty.1 year....
Check Stock

Huanyang Water Cooled VFD Spindle Milling Motor 110V 1.5KW 24000RPM 400hz Φ80mm ER11 Collet for Wood Carving

  • The item is Water Cooled 110V-1.5KW 3 bearings Φ80mm spindle motor.(come with a 6mm collet).
  • NOTE:Need to be equipped with 110v 400hz variable frequency drive to use.Rated frequency of spindle is 400 Hz,If you input 220v voltage at 50hz or 60hz, it will damage the spindle..
  • stable performance,high precision bearing.
  • Application:wood carving/engraving machine, advertisement engraving machine,CNC machine, small sized processing center, high speed centrifuge etc..
Check Stock