Top Multi surface Primer

KILZ Adhesion Primer, Interior/Exterior, 1 Quart

  • A good bonding primer is essential to ensure that topcoats adhere to tough-to-paint surfaces. High adhesion primer increases painting possibilities by bonding to a wide range of surfaces. Use on properly prepared surfaces free of dust, grease, chalk, rust and peeling paint. Mix well before using. Apply with brush, roller, or spray..
  • KILZ Adhesion is a unique latex primer developed to bond securely on slick surfaces where a traditional water or oil-base primer will not adhere..
  • Bonds to tough-to-paint surfaces including Kynar, PVC, Formica, vinyl, glass, tile, glazed brick, chalky paints, glossy finishes, fiberglass and metals. Topcoat with either latex or oil-based paint..
  • Use on most interior and exterior surfaces where a secure bond is critical. This problem solving primer can be used under epoxies, lacquers, and products containing Xylene or other solvents. KILZ Adhesion dries to touch within 30 minutes and ready to recoat in an hour..
  • This is a 1-gallon can of KILZ Adhesion High-Bonding Interior/Exterior water-based Primer in white. Covers approximately 300 square feet per gallon. KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend Rankings..
Check Stock

Oatey 30751 House Primers, 8 oz, Clear, 8 Fl Oz

  • Clear Primer, NSF listed (National Sanitation Foundation).
  • Clear aggressive primer used on PVC (polyvinyl chloride) and CPVC (chlorinated polyvinyl chloride) pipe and fittings.
  • Low VOC (volatile organic compound) solvent cement.
  • A clear aggressive primer for use on PVC and CPVC pipe and fittings.
  • Lo-V. O. C. Primer meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
  • Removes surface dirt, grease and grime as well as softens the pipe surface to allow a fast, secure solvent weld.
  • Lo-V.O.C. Primer meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
Check Stock

TotalBoat 2-Part Marine Epoxy Primer Off White High Build Primer Quart

  • 2-Component epoxy primers provide maximum adhesion & improved durability for urethane topcoats on fiberglass, metal, and previously painted surfaces.....
  • The Surfacing Epoxy Primer formula is great for sealing faired substrates ready for topcoat application..
  • The High Build Epoxy Primer formula is ideal for covering pinholing and filling other minor surface defects..
  • Dries fast and is easy to sand. Overcoat with 1- and 2-part urethanes. For use above and below the waterline..
  • Choose primer type, size, and color: Surfacing Primer is available in Quart and Gallon size kits, in Gray and Off White.
Check Stock

Zinsser Rust-OLEUM 249933 1-2-3 Plus Quart, 32 Fl Oz (Pack of 1), White, 11

  • The product is manufactured in United States.
  • First water-based primer that blocks water stains..
  • Covers approximately 350 to 400 square feet per gallon depending on surface type..
Check Stock

VHT SP118 FlameProof Coating Flat White Primer Can - 11 oz. by VHT

  • XTC Silicone Zinc Primer prevents corrosion of metal surfaces exposed to high heat, high humidity, condensation and salt air.
  • XTC Silicone Zinc Primer functions much like galvanizing as it locks itself to bare metal surfaces leaving a perfect primed surface for top coating.
  • XTC Silicone Zinc Primer can be used alone as a finish paint.
  • XTC Primer withstands temps in excess of 1200 Degree F (648 Degree C).
  • XTC Silicone Zinc Primer is Gray in color.
Check Stock

Rust-Oleum Stops Rust Satin Black Oil-Based Protective Paint 1 qt. Exterior and Interior - Total Qty: 2

  • A good bonding primer is essential to ensure that topcoats adhere to tough-to-paint surfaces. High adhesion primer increases painting possibilities by bonding to a wide range of surfaces. Use on properly prepared surfaces free of dust, grease, chalk, rust and peeling paint. Mix well before using. Apply with brush, roller, or spray..
  • KILZ Adhesion is a unique latex primer developed to bond securely on slick surfaces where a traditional water or oil-base primer will not adhere. Viscosity - 93 - 100 KU. Roller - Smooth Surface - 3/8 - 1/2 inch nap.Roller - Porous Surface - 1/2 - 3/4 inch nap. Spray Pressure - 2,500 - 3,200. Spray Tip -.015 - .021 inches.
  • Bonds to tough-to-paint surfaces including Kynar, PVC, Formica, vinyl, glass, tile, glazed brick, chalky paints, glossy finishes, fiberglass and metals. Topcoat with either latex or oil-based paint..
  • Use on most interior and exterior surfaces where a secure bond is critical. This problem solving primer can be used under epoxies, lacquers, and products containing Xylene or other solvents. KILZ Adhesion dries to touch within 30 minutes and ready to recoat in an hour..
  • This is a 1-gallon can of KILZ Adhesion High-Bonding Interior/Exterior water-based Primer in white. Covers approximately 300 square f....
Check Stock

Evercoat Slick Sand Polyester Primer Surfacer for Fiberglass, Wood Surfaces & More - 128 Fl Oz

  • Excellent Foundation Primer: Convenient primer surfacer for any paint system.
  • Easy Sanding: Use 180 and 220 grit sandpaper on an orbital sander, depending on the surface.
  • Highly Adhesive Primer: Ideally suited for filling most rough and uneven surfaces in one coat.
  • Versatile Surfaces Application: Our products are applicable on metal, aluminum, fiberglass, and more.
  • Automotive Body Repair: We provide high-quality putty, primer, and body filler formulations.
Check Stock

Quick Drying MDF Primer and Undercoat 500ml White

  • The product is manufactured in United States.
  • First water-based primer that blocks water stains..
  • Covers approximately 350 to 400 square feet per gallon depending on surface type..
Check Stock

POR-15 High Build Primer - 1 gl. - Sandable Bonding Coat | Fills in Minor Imperfections | Single Component Formula

  • ...nd buildable coating that can be applied over cured POR-15 Rust Preventive Coating and all POR-15 topcoats to enable quick refinishing and recoating of these products. Single component formula that fills in minor Imperfections and adheres well to steel, aluminum, stainless steel, brass, and other primed and painted surfaces..
  • ✅ INTERLOCKING PRIMER - Formulated with special adhesion characteristics that make POR-15 High Build Primer perfect for most painted surfaces especially POR-15 Rust Preventive Coating. Our High Build Primer Provides sandable and buildable coating that can be applied over cured POR-15 Rust Preventive Coating and all POR-15 topcoats to enable quick refinishing and recoating of these products..
  • ✅ APPLICATION - For maximum adhesion sand surfaces to be painted with 320 grit sandpaper. Clean painted and bare metal surfaces with POR-15 Cleaner Degreaser. Bare metal surfaces should be treated with POR-15 Metal Prep for maximum adhesion. Spray or brush on one or two covering coats of POR-15 High Build Primer and allow 10 to 15 minutes between coats. POR-15 High Build Primer can be topcoated after 24 hours of cure..
  • ✅ WHEN DO I NEED THIS? - POR-15 High Build Primer is highly resistant to penetrating topcoats, like lacquers, enamels, an....
Check Stock

Sargent Art - 22-9703 Gallon Gallon Gesso, Surface Primer, 128oz, White

  • Primer Color: The base color is White which makes it perfect for the primer coat..
  • Excellent Base Coat: It is an excellent base coat primer for many applications including paintings and canvas priming and sizing..
  • Canvas Primer: Good primer for surfaces like raw canvas and card paper to help hold paint and other media. It also helps prime surfaces for oil paints and acrylics..
  • Water-Resistant: Sargent Art 32-Ounce Extra Thick Gesso resists water when dry. Creates a good surface to apply paint media to..
  • Safe for Use: The Sargent Art 32-Ounce Extra Thick Gesso is non-toxic, safe and acid-free. A good product for students, teachers and professionals..
Check Stock

POR-15 Self Etch Primer Spray - Gray - 15 Fl. Oz. - Adheres to Metal & Painted Surfaces | Quick Drying | Easy Application

  • ✅ POR-15 SELF ETCH PRIMER - Is formulated to dry quickly and promote adhesion for the coming layers. Proven to bond incredibly well to all top coats. For a superior layer of protection against rust, apply POR-15 Rust prevention coating following self etch primer spray..
  • ✅ APPLICATION - All surfaces must be clean and free of all dirt, loose rust, oil, grease, wax, soap, loose paint and any other matter. Shake well before spraying. Spray two light coats of and allow 10 to 15 minutes between coats. Our Self Etch Primer can be topcoated in 30 minutes..
  • ✅ INCREDIBLE BOND - Our Self Etch Primer is NOT a high-build primer, but it can be sprayed on almost any painted surface and can be top coated in 20 - 30 minutes. It bonds incredibly well to POR-15 Rust Preventive Coating, and all topcoats bond incredibly well to POR-15 Self Etch Primer. It can be sanded lightly, and if desired, multiple coats may be applied..
  • ✅ WHEN DO I NEED THIS? – The etching creates a rougher surface for your topcoat to cling to, much like sanding would accomplish. It adheres well to steel, aluminum, stainless steel, brass, and other primed and painted surfaces. POR-15 Self Etch Primer will help maintain the overall look of your surface while preventing future rust and corrosio....
Check Stock

KILZ 2 All-Purpose Primer, Interior/Exterior, 5 Gallon

  • PRIMER | SEALER | STAIN-BLOCKER: Our best selling primer trusted by pros for over 50 years, KILZ 2 ALL-PURPOSE is famous for its balance between price and performance. Great at hiding previous colors, blocking light-to-medium stains and offering excellent adhesion to most interior and exterior surfaces as well as the topcoat, its dependable proven performance you can trust..
  • ADVANCED FORMULA: This ever-reliable hard working acrylic polymer formula makes KILZ 2 an effective primer, sealer and stain blocker for most residental and commercial painting jobs. Its slightly toned formula helps hide marks, stains and previous colors while providing effective stain blocking for mild to medium stains such as ink, pencil, felt marker, grease, nicotone and even water stains. It seals porous surfaces and offers strong adhesion for new paint allowing you to use less paint..
  • MULTIPLE SURFACES: Use this versatile primer-sealer-stainblocker on interior and exterior surfaces including woodwork, drywall, plaster, paneling, masonry, brick, painted metal and properly prepared glossy surfaces. Surfaces should be free of dust, grease, chalk, rust and peeling paint. Works with oil, alkyd a....
Check Stock