Top N Dual Emitter

YONGNUO YN560-TX PRO N Flash Transmitter Control Trigger 1/8000s TTL M Multi HSS for Nikon D7000 D5100 D90 D60

  • YN560-TX PRO can control, trigger YN200/YN862 series and the models which have been upgraded to the latest firmware such as YN622C(N) II/YN685/YN968C (in 560RX mode)/YN968N(II) to realize iTTL/M flash, high speed sync, focal length control functions..
  • Compatible with radio flash and flash trigger models such as YONGNUO YN560III/IV/YN660/YN720/YN860Li/RF603 series /RF605 series directly, realize manual flash functions..
  • 16 channels, up to 10,000 customizable photographer ID, A/B/C/D/E/F 6 flash groups.
  • Supports front-curtain sync, rear-curtain sync, auto high speed sync.
  • 2.4G radio Maximum communication distance is over 100m.
  • Supports remote control focal settings of slave unit flash (only for YONGNUO compatible flashes).
  • Firmware can be upgraded via USB(Micro-USB).
  • High resolution dot-matrix LCD, backlight for keys.
Check Stock

NTE Electronics MJ10012 Silicon NPN Power Darlington Transistor, 400V, 10 Amp

  • High DC Current Gain - hFE = 2500 (typ) @ IC = 4.0 Adc.
  • Collector-Emitter Sustaining Voltage @ 100 mA VCEO(sus) = 60 Vdc (Min) TIP120, TIP125.
  • Low Collector-Emitter Saturation Voltage VCE(sat) = 2.0 Vdc (Max) @ IC= 3.0 Adc = 4.0 Vdc (Max) @ IC= 5.0 Adc.
  • Monolithic Construction with Built-In Base-Emitter Shunt Resistors.
Check Stock

WenkeDigi IR Infrared Repeater System kit, IR Repeater Extender, Max 100 Feet Efficient Receiver Range - IR Remote Control Hidden Devices -10 Feet IR Receiver Cable (Can Run 400 Feet by Your Cat5e)

  • This IR kit is a device that only passes on the infrared signal . It is used to control Four (4) IR devices out of sight that are kept in a closed cabinet or in anther room ( expandable up to 18, and 4 x single emitter provided in the package , Additional IR Emitters sold separately, One emitter one device ) . Strong Compatibly , It is compatible with almost all the IR electronic appliances like SKY STB and CISCO DVD player , SONY receivers ,Amplifier, Xbox, TV , Blu-ray player,etc with its wide frequency range 20 KHz to 60KHz ..
  • Mini Block Size , Dual Sensors Mini Bar IR receiver , One Sensor 38KHz , the Other 56KHz, with long effective remote control distance up to 100 FEET @38KHz and 23 FEET at 56KHz , High sensitivity, Real time transmission without any delay . It allows you to control your home theater with your existing IR remote controller. NOTE : NOT support RF and Bluetooth Remote Control ..
  • This IR Repeater system kit supplies with an ideal solution for those who want to conceal their A/V components equipment inside a entertainment system cabinet or closet door for a clean, stylish look. It makes it possible to control multiple IR devices while these are in a closed cupboard or in a remote location out of sight ..
Check Stock

IR Emitter Extender cable,2-eye transmitter 20-60Hz） cable length 10FT,support TV,DVD,CD DVR cable box set-top box etc.

  • COMPATIBLE:with Most IR Remote Controls. Tested to work with Amplifier, Cable Box, Stereo Receiver, Game Console, Satellite TV receiver, CD/DVD....
  • IR Emitter Mini Stick-On Infrared Emitters Blink Eye. This mini emitter Emits IR signal from modulator to AV component. It is designed to be installed....
  • Two Heads allow you to control multiple pieces of equipment with only one IR output.
  • For use with IR extender extension system, Xbox One, IR....
  • IR emitter extension cable with single eye that is compatible with devices in 38khz and 3.5mm port.
  • Installation is quick and easy. Simply connect the IR Emitter to your remote control extender and put the IR eyes inside the cabinet. By placing the....
Check Stock

Bridgold 20pcs TIP127 PNP BJT Transistors Darlington Bipolar Power Transistor 5A -100v 3Pins

  • Collector-Emitter Sustaining Voltage @ 100 mA VCEO(sus) = 100 Vdc (Min) TIP122, TIP127.
  • Low Collector-Emitter Saturation Voltage VCE(sat) = 2.0 Vdc (Max) @ IC= 3.0 Adc = 4.0 Vdc (Max) @ IC= 5.0 Adc.
  • High DC Current Gain - hFE = 2500 (typ) @ IC = 4.0 Adc.
  • Monolithic construction with built-in base-emitter shunt resistors.
Check Stock

Bridgold 10pcs TIP102 102 Bipolar BJT Single NPN Darlington Transistor 100 V/8 A,3-Pin TO-220

  • High DC Current Gain − hFE = 2500 (Typ) @ IC = 4.0 Adc.
  • Collector−Emitter Sustaining Voltage − @ 30 mAdc VCEO(sus) = 100 Vdc (Min) − TIP102, TIP107.
  • Monolithic Construction with Built−in Base−Emitter Shunt Resistors.
  • Low Collector−Emitter Saturation Voltage − VCE(sat) = 2.0 Vdc (Max) @ IC = 3.0 Adc = 2.5 Vdc (Max) @ IC = 8.0 Adc.
  • We have undergone rigorous testing and stable performance.
Check Stock

EasiBBQ Emitter Plates for Charbroil Grill 463242515, 463367016, 463242516, 466242515, 466242615, 463243016, 463367516, 466242516, 466242616, 463346017, Stainless Steel

  • Replacement for Charbroil Commercial Infrared 3 Burner 463242516, 463242515, 466242515, 466242615, 463243016, 463367516, 463367016, 466242516, 466242616, 463346017, 463246018..
  • Package includes 3 pack Premium Stainless Steel Emitter Plates. Easy to install and replace..
  • Dimensions: 17" x 8-1/16" per emitter. Make sure you measure the size of your original part and compare with ours before you order..
  • There are many holes in the surface of the Emitter Plate, the heat from the burner tube can be distributed better through the entire grill..
  • Improved the grilling by reduces flare-ups. It brings more flavorful food at a time..
Check Stock

SZBJ IR Emitter Extender Cable Extension 3.2 Feet - Dual Head 3.5mm Infrared Red Transmitter Pure Copper Wire Cord Compatible with IR Repeater Extender System Kit Xbox One 2 IR Emitter

  • Passes IR communication: Used with an IR Repeater kit or other electronics has emitter output to control a device.Adhesive backing allows the emitter....
  • 3.2 ft overall length of Infrared Emitter cable between the emitter heads and the mini-plug, extend remote control ability to any room any where in....
  • Control A/V component by the existing IR controller: such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD player, DVD....
  • Easy to use : Sticks directly onto the AV equipment, and quad Heads allow you to control multiple pieces of equipment with only one IR output..
  • Plug into IR OUT port for use with IR extender extension system, Xbox One, IR Connecting Blocks and Home Automation controllers..
Check Stock

Cast Iron Grill Grate & Stainless Steel Emitter Plate Replacement Kit for Charbroil 463242516, 463242515, 466242515, 466242615, 463243016, 463367516, 463367016, 466242516, 466242616,463346017,3PCS Set

  • The cast iron grill grates and stainless steel grill emitters plates set fit Charbroil Commercial Infrared 3 Burner 463242516, 463242515, 466242515, 466242615, 463243016, 463367516, 463367016, 466242516, 466242616, 463346017, 463246018 perfectly..
  • The non-stick grates are made from sturdy cast iron which can prolong grill life expectancy and cast iron grates sit well on the stainless steel grill emitter plates for your charbroil grill.
  • Great replacement for original Char-Broil Infrared grates/emitters!.
  • Easy to clean and easy to install!The holes are drilled on the other side of the flame diffusers, so you can just flip it over to be almost exactly like the factory diffuser. The diffuser will work fine flipped over..
  • Specification: Material:Emitters are made from stamped stainless steel.
  • Cooking grill grid grates are made from sturdy matte enamel cast iron.
  • Package includes: 3-pack grill emitter plates and 3-pack grates.
  • Note: Please compare our cooking grates & emitter plate set with your original parts and check your original size before purchasing to avoid buying mistakes..
Check Stock

Belkin Play N600 HD Wireless Dual Band N+ Router

  • Dual-Band N Technology Gives You The Fastest, Most Reliable Speeds For Video, Music And Gaming With Speeds Of Up To 300 Mbps.
  • Step Up To Better Wireless High-Performance Dual-Band Networking N+N/802.11N.
  • Dual-Plane Antennas And Mimo Technology Provides The Best Coverage For Demanding Home Usage.
  • Coverage Mimo Technology Provides Maximum Coverage For Demanding Home Usage.
  • Continuous Signal For Uninterrupted Wireless For Multiple Users Across All Your Applications.
  • 1 USB Port For Wireless Printing And Storage.
  • Security Settings Are Preset To Get You Up And Running Safely.
  • Updated packaging from Manufacturer with New Title.
Check Stock

Xantech DL95K Universal Dinky Link Extended Range IR Kit

  • Low profile and easy to hide, it works with all types of cable boxes, satellite boxes, and TVs.
  • Proprietary ambient noise-suppression technology for reliable operation in any lighting environment including compact fluorescents.
  • IR modulation frequency bandwidth: 25-60kHz.
  • Reception range: up to 120 ft (36m) depending on conditions.
  • Color-coded connectors for fast, easy installation.
  • Kit includes DL95 IR receiver, Model 789-44 connecting block that connects one IR receiver to four IR emitter ports (can drive up to four dual....
Check Stock

EasiBBQ Stainless Steel Cooking Grid for Charbroil 463242715 463242716 463276016 466242715 466242815 Gas Grill 3 Pack

  • Compatible with Char-Broil Commercial TRU-Infrared 463242715, 463242716, 463276016, 466242715, 466242716, 466242815, 466242816 Gas Grill. Compatible....
  • Compatible with Char-Broil Original Part Number: CHRG533-0009-W1, G5330009W1, G533-0009-W1, CHRG533-0009-W1A, G533-0009-W1A..
  • Package includes 3-pack Premium Stainless Steel Emitter Plates. Easy to install and replace..
  • Dimensions: 17" x 9 7/8" per emitter. Make sure you measure the size of your original parts and compare with ours before you order..
  • There are many holes in the surface of the Emitter Plate, the heat from the burner tube can be distributed better through the entire grill..
Check Stock